| L-3033 | Chan Sieh Enterprises Co, Ltd. | L-3033 is an aliphatic polycarbonate polyol with a solid content ratio of 39.3%. This product has good mechanical and film properties. It is flexible and provides solvent-resistance. L-3033 can be used in industrial enamels and automotive primer paints...view more L-3033 is an aliphatic polycarbonate polyol with a solid content ratio of 39.3%. This product has good mechanical and film properties. It is flexible and provides solvent-resistance. L-3033 can be used in industrial enamels and automotive primer paints. view less | |
| Bayhydur® XP 2547 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® XP 2547 is a solvent-free, water-dispersible polyisocyanate based on hexamethylene diisocyanate used as a crosslinking agent for two-component waterborne polyurethane coatings. Due to its hydrophilic character, Bayhydur® XP 2547 can be easily di...view more Bayhydur® XP 2547 is a solvent-free, water-dispersible polyisocyanate based on hexamethylene diisocyanate used as a crosslinking agent for two-component waterborne polyurethane coatings. Due to its hydrophilic character, Bayhydur® XP 2547 can be easily dispersed in the aqueous phase. It is used primarily as the crosslinking agent for waterborne polyol binders (Bayhydrol®). The dispersibility of the product in water is influenced by organic cosolvents. view less | |
| Bayhytherm® 3146 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhytherm® 3146 is a water-reducible, aliphatic, self-crosslinking stoving urethane resin used as binder for waterborne, one-component stoving polyurethane systems. Bayhytherm® 3146 is used for the formulation of waterborne, one-component baking systems ...view more Bayhytherm® 3146 is a water-reducible, aliphatic, self-crosslinking stoving urethane resin used as binder for waterborne, one-component stoving polyurethane systems. Bayhytherm® 3146 is used for the formulation of waterborne, one-component baking systems such as waterborne fillers or general purpose industrial coatings. Coating films based on Bayhytherm® 3146 exhibit extraordinary impact strength, adhesion and overcoatability. Bayhytherm® 3146 can also be used as an additive to conventional waterborne stoving systems to improve flexibility, impact strength and adhesion. view less | |
| Bayhydur® XP 2700 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® XP 2700 is an hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI), and acts as a hardener for aqueous two-component polyurethane systems. Bayhydur® XP 2700 is a crosslinker for aqueous coatings. It was developed specia...view more Bayhydur® XP 2700 is an hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI), and acts as a hardener for aqueous two-component polyurethane systems. Bayhydur® XP 2700 is a crosslinker for aqueous coatings. It was developed specially for trade applications where the ease of mixing the hardener by manual stirring is a key requirement. view less | |
| Bayhydrol® U XP 2755 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U XP 2755 is an solvent-free, aqueous hydroxyfunctional polyester-polyurethane dispersion. When combined with aliphatic polyisocyanates, it is well suited for the formulation of glossy and matte clear 2K polyurethane coatings, as well as pigmen...view more Bayhydrol® U XP 2755 is an solvent-free, aqueous hydroxyfunctional polyester-polyurethane dispersion. When combined with aliphatic polyisocyanates, it is well suited for the formulation of glossy and matte clear 2K polyurethane coatings, as well as pigmented coatings. This product provides coatings with very good film transparency, high wood warmth, fast drying, high hardness, and long pot life. view less | |
| Bayhydrol® A 2470 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2470 is an aqueous hydroxyfunctional polyacrylic dispersion that has waterborne 2K-Polyurethane varnishes in combination with aliphatic Polyisocyanates. This product has a viscosity at 23°C, D=approx.40s-1 of 1,500 - 3,000, a non-volatile con...view more Bayhydrol® A 2470 is an aqueous hydroxyfunctional polyacrylic dispersion that has waterborne 2K-Polyurethane varnishes in combination with aliphatic Polyisocyanates. This product has a viscosity at 23°C, D=approx.40s-1 of 1,500 - 3,000, a non-volatile content (1g / 1h / 125°C / convection oven) of 44-47, and a pH (1:4 in demineralised water) value of 7-8. Bayhydrol® A 2470 is a hydroxyfunctional polyacrylic dispersion which can be thinned with water to application viscosity. The viscosity of the product is largely governed by the pH. As the pH may decrease during storage, a decrease in viscosity is also to be expected. The viscosity can be restored to its original value by the addition of small amounts of an aqueous 10% solution of dimethyl ethanol amine. view less | |
| Bayhydur® XP 2487/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® XP 2487/1 is an hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI), that can be used as a hardener for water borne two-component polyurethane systems. Bayhydur® XP 2487/1 is a crosslinking agent for waterborne systems...view more Bayhydur® XP 2487/1 is an hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI), that can be used as a hardener for water borne two-component polyurethane systems. Bayhydur® XP 2487/1 is a crosslinking agent for waterborne systems from which reliable incorporation and high chemical resistance are required. The dispersibility of the product in water is influenced by organic cosolvents. view less | |
| Bayhydur® XP 2759 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® XP 2759 is an hydrophillic aliphatic polyisocyanate based on isophorone diisocyanate (IPDI), that can be used as a hardener for waterborne two-component polyurethane systems. Bayhydur® XP 2759 is mainly used as co-reactant for aqueous binders. B...view more Bayhydur® XP 2759 is an hydrophillic aliphatic polyisocyanate based on isophorone diisocyanate (IPDI), that can be used as a hardener for waterborne two-component polyurethane systems. Bayhydur® XP 2759 is mainly used as co-reactant for aqueous binders. Because of its hydrophilic character, it can be easily emulsified in the aqueous phase. Bayhydur® XP 2759 yields coatings with high chemical and weather resistance. Bayhydur® XP 2759 can be combined with aliphatic HDI based Desmodur® or Bayhydur® grades in order to reduce drying times and increase hardness, weather resistance and open time as well as blister free film thickness. view less | |
| Desmodur® XP 2565 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® XP 2565 is a low-viscosity, aliphatic polyisocyanate resin based on isophorone diisocyanate. It is used as the hardener component for weather-stable coating systems. In combination with HDI hardeners, the product is suitable for the formulation of high-solids and waterborne two-component polyurethane...view more Desmodur® XP 2565 is a low-viscosity, aliphatic polyisocyanate resin based on isophorone diisocyanate. It is used as the hardener component for weather-stable coating systems. In combination with HDI hardeners, the product is suitable for the formulation of high-solids and waterborne two-component polyurethane systems for automotive refinishing, transportation and industrial coating applications. This product has a monomeric IPDI (supply form) of < 0.5%, a hazen color value of ≤ 60, and a flash point of approx. 38.5°C. view less | |
| Bayhydur® XP 2655 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® XP 2655 is an hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) used as the hardener for waterborne two-component polyurethane systems. Bayhydur® XP 2655 is a crosslinking agent for waterborne systems from which reli...view more Bayhydur® XP 2655 is an hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) used as the hardener for waterborne two-component polyurethane systems. Bayhydur® XP 2655 is a crosslinking agent for waterborne systems from which reliable incorporation and high chemical resistances are required. Despite its relatively low hydrophilia, this hardener can be easily dispersed in the aqueous phase, even at low shear forces such as are typically found in trade applications. Coatings formulated with the product yield films with high gloss and very low haze. The increase in viscosity during mixing that is typical for hydrophilized hardeners, in particular with ionically hydrophilized polyol dispersions, can be controlled by prethinning with water or slight amounts of organic cosolvent. view less | |
| Bayhydur® 304 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® 304 is hydrophilically modified, aliphatic polyisocyanate based on hexamethylate diisocyanate (HDI). It is as the hardener/binder component for high-quality waterborne polymer dispersions and as an additive to improve the property level of water...view more Bayhydur® 304 is hydrophilically modified, aliphatic polyisocyanate based on hexamethylate diisocyanate (HDI). It is as the hardener/binder component for high-quality waterborne polymer dispersions and as an additive to improve the property level of waterborne coating and adhesive systems. This product has a NCO content of 18.2 ± 0.5, a viscosity at 23°C of 4,000 ± 1,500, a hazen color value of ≤ 60, and a monomeric HDI content of < 0.15. This product is used mainly as the crosslinking partner for waterborne polyol binders (Bayhydrol®) and as a crosslinker for largely pH-neutral waterborne polymer dispersions, including polyurethane (Dispercoll® U), polyvinyl acetate, polyacrylate and synthetic rubber dispersions. view less | |
| Bayhydrol® A 2427 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2427 is an aqueous, hydroxyfunctional polyacrylate dispersion used in the formulation of fast-drying, waterborne two-component polyurethane primers and topcoats, as well as one-component coatings. This product has a non-volatile content (1 g/...view more Bayhydrol® A 2427 is an aqueous, hydroxyfunctional polyacrylate dispersion used in the formulation of fast-drying, waterborne two-component polyurethane primers and topcoats, as well as one-component coatings. This product has a non-volatile content (1 g/1 h/125°C, convection oven) of 41-44, a viscosity at 23°C, (D=ca.40s-1) of max. 100, and a pH (1:3 in demineralised water) of 8-9. Bayhydrol® A 2427 is preferably combined with anionic hydrophilically modified polyisocyanates such as Bayhydur® XP 2487/1 to formulate transparent and pigmented primers and topcoats. Topcoats based on Bayhydrol® A 2427 and Bayhydur® XP 2487/1 are characterized by their good chemical resistance properties, especially their resistance to discoloring liquids. view less | |
| Bayhydur® 3100 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® 3100 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate, which is used as the hardener component for high-quality aqueous two-pack polyurethane systems and as an additive to improve the property profile of aqueous coat...view more Bayhydur® 3100 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate, which is used as the hardener component for high-quality aqueous two-pack polyurethane systems and as an additive to improve the property profile of aqueous coating and adhesive systems. This product has a viscosity at 23°C of 2,800 ± 800, a NCO content of 17.4 ± 0.5, a color value (Hazen) of ≤ 60, and a monomeric HDI of ≤ 0,15. Due to its hydrophilic character, Bayhydur® 3100 can be easily emulsified in the aqueous phase. It is used mainly as the crosslinking agent for aqueous polyol binders (Bayhydrol®). Bayhydur® 3100 can also be added to conventional OH-free dispersions to improve their property profiles. view less | |
| Bayhydur® 401-70 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® 401-70 is a hydrophilically modified aliphatic polyisocyanate based on isophorone diisocyanate (IPDI), which is used as the co-reactant for aqueous resins and as the hardener for chemically resistant and weather-stable coating systems. This product has a NCO content of 9.4 ± 0.5, a non-volatile content (0.2g / 60min / 120°C) of 70 ± 2, and a viscosity at 23°C,(D=81,8s-1) of 600 ± 200. Bayhydur® 401-70 is mainly used as the co-reactant for aqueous polyol binders from the Bayhydrol® range. Due to its hydrophilic character, Bayhydur® 401-70 can be easily emulsified in the aqueous phase. The properties (e.g. resistance to chemicals and solvents) of aqueous two-component polyurethane...view more Bayhydur® 401-70 is a hydrophilically modified aliphatic polyisocyanate based on isophorone diisocyanate (IPDI), which is used as the co-reactant for aqueous resins and as the hardener for chemically resistant and weather-stable coating systems. This product has a NCO content of 9.4 ± 0.5, a non-volatile content (0.2g / 60min / 120°C) of 70 ± 2, and a viscosity at 23°C,(D=81,8s-1) of 600 ± 200. Bayhydur® 401-70 is mainly used as the co-reactant for aqueous polyol binders from the Bayhydrol® range. Due to its hydrophilic character, Bayhydur® 401-70 can be easily emulsified in the aqueous phase. The properties (e.g. resistance to chemicals and solvents) of aqueous two-component polyurethane coatings can be improved by the addition of Bayhydur® 401-70. view less | |
| Bayhydur® 305 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® 305 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) that is used as a hardener for aqueous two-component polyurethane systems. This product has a NCO content of 16.2 ± 0,4, a viscosity at 23°C of 6,500 ± 1,500...view more Bayhydur® 305 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) that is used as a hardener for aqueous two-component polyurethane systems. This product has a NCO content of 16.2 ± 0,4, a viscosity at 23°C of 6,500 ± 1,500, a hazen color value of ≤ 150, and a monomeric HDI content of < 0.15. Bayhydur® 305 is a crosslinker for aqueous coatings. It was developed specially for trade applications where the ease of mixing the hardener by shaking or manual stirring is a key requirement. Despite pre-thinning, the coating yields transparent glossy films. The mixing ratio of mill base to hardener is usually 10:1. view less | |
| Desmodur® N 3600 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® N 3600 is a solvent-free, aliphatic polyisocyanate (low-viscosity HDI trimer) that is ideally used as the hardener component for flexible, lightfast polyurethane coating systems. It has a viscosity at 25°C of approx. 1,100mPa·s, a density at 20°...view more Desmodur® N 3600 is a solvent-free, aliphatic polyisocyanate (low-viscosity HDI trimer) that is ideally used as the hardener component for flexible, lightfast polyurethane coating systems. It has a viscosity at 25°C of approx. 1,100mPa·s, a density at 20°C of approx. 1.16g/ml, and an NCO content of 23.0 ± 0.5%. The main applications for systems based on Desmodur® N 3600 are air- and force-drying coatings for automotive OEM, automotive refinishing, transportation, industrial finishing and plastics. On account of its low viscosity, Desmodur® N 3600 is particularly suitable for the formulation of high-solids coatings and can also be used as the hardener for aqueous two-component polyurethane coatings. view less | |
| Bayhydrol® A 242 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 242 is a water-thinnable polyacrylic resin containing hydroxyl groups. It is used as a coreactant for Bayhydur® and Desmodur® polyisocyanates in the formulation of aqueous two-component polyurethane systems for various applications by brush, ...view more Bayhydrol® A 242 is a water-thinnable polyacrylic resin containing hydroxyl groups. It is used as a coreactant for Bayhydur® and Desmodur® polyisocyanates in the formulation of aqueous two-component polyurethane systems for various applications by brush, roller or spray. This product has a viscosity at 23°C, (D = approx. 165 s-1) of 200 ± 100, a non-volatile content (1g, 1h, 125°C) of 42 ± 2, and a pH (10% in demineralized water) value of 7.1 ± 0.7. Bayhydrol® A 242 is a water-thinnable hydroxyfunctional polyacrylic resin with emulsifying properties. It is neutralised with ammonia. Given the special composition of this product, both hydrophilic polyisocyanates, e.g. Bayhydur® 3100, and hydrophobic grades, such as Desmodur® N 3400 and others, are suitable co-reactants. The resultant water-thinnable two-component system cures to yield a polyurethane film with good general properties, and only a small-scale polyurea reaction takes place. view less | |
| Bayhydrol® U XP 2750 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U XP 2750 is a binder for the formulation of water-reducible 2K-PUR coatings. This product is an aliphatic, hydroxyfunctional polycarbonate ester-polyurethane dispersion, that is cosolvent-free. This product has an acid number of approx. 9.0, a...view more Bayhydrol® U XP 2750 is a binder for the formulation of water-reducible 2K-PUR coatings. This product is an aliphatic, hydroxyfunctional polycarbonate ester-polyurethane dispersion, that is cosolvent-free. This product has an acid number of approx. 9.0, a density at 20°C of approx. 1.06, and an OH content (solid resin) of approx. 3.6. Bayhydrol® U XP 2750 is a hydroxyfunctional polycarbonate ester-polyurethane dispersion which can be thinned with water to application viscosity. It is a two-component polyurethane hydrocoatings based on Bayhydrol® U XP 2750 are characterized by high weathering resistance (gloss-retention, resistance to cracking), good appearance (high gloss, low haze value) and very high reflow-behavior after dry-or weet-scratching. view less | |
| Bayhydrol® UH 2606 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2606 is a solvent-free anionic polyurethane dispersion containing polycarbonate that is used as a binder for the formulation of water-reducible coatings for plastic substrates and wood materials. This product has an Efflux time at 23°C (4mmc...view more Bayhydrol® UH 2606 is a solvent-free anionic polyurethane dispersion containing polycarbonate that is used as a binder for the formulation of water-reducible coatings for plastic substrates and wood materials. This product has an Efflux time at 23°C (4mmcup) of 12-60, a non-volatile content (1g / 1h / 125°C) of 34-36, and a pH value of 7-9. The product was designed specifically for the coating of plastic substrates. In addition the use in the formulation of PVC floor coatings, the binder exhibits a high grade property profile on a variety of substrates. Filler and topcoat applications (one and two-component) are also plausible. Other possibilities are wood and furniture applications. Bayhydrol UH 2606 yields coatings with good leveling, chemical and weather stabilities. They are also characterized by a tough but flexible property profile. Very good combinations are possible with polyester, polyurethane and acrylic dispersions, and combinations with waterborne UV systems are possible. Resistances can also be improved by post-curing with e.g. Bayhydur®. The mixing ratio of mill base to hardener is generally 10:1. view less | |
| Bayhydrol® UH 2558 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2558 is a cosolvent-free aliphatic, anionic polyurethane dispersion used as a binder in the formulation of water-reducible coatings and sealers. This product has a non-volatile content (1g / 1h / 125°C) of 35-39, an Efflux time at 23°C, (4mm...view more Bayhydrol® UH 2558 is a cosolvent-free aliphatic, anionic polyurethane dispersion used as a binder in the formulation of water-reducible coatings and sealers. This product has a non-volatile content (1g / 1h / 125°C) of 35-39, an Efflux time at 23°C, (4mmcup) of max. 40, and a pH (1:3 in demineralised water) value of 7-9. The product is characterized by high resistance to yellowing, very good wet film transparency and very good abrasion resistance (taber), where the films are hard but flexible. Post-curing of such coatings with Bayhydur®, for example, brings additional significant advantages and results in waterborne two-component coatings with significantly higher mechanical and chemical resistance. The mixing ratio of mill base to hardener is generally 10:1. Compatibility with affordable PAC dispersions is good but must be tested on a case-by-case basis. view less | |
| Bayhydur® BL XP 2706 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate used in combination with Bayhydrol® polyols for the formulation of water-reducible, lightfast one-component polyurethane baking coatings and as an additive in waterborne baking systems t...view more Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate used in combination with Bayhydrol® polyols for the formulation of water-reducible, lightfast one-component polyurethane baking coatings and as an additive in waterborne baking systems to improve hardness, impact strength, chemical resistance and adhesion. view less | |
| Bayhydrol® UH XP 2719 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH XP 2719 is a solvent-free aliphatic, polyester-based, anionic polyurethane dispersion that is used as a binder for the formulation of water-reducible one and two-component coatings and sealers. This product has an average particle size of ap...view more Bayhydrol® UH XP 2719 is a solvent-free aliphatic, polyester-based, anionic polyurethane dispersion that is used as a binder for the formulation of water-reducible one and two-component coatings and sealers. This product has an average particle size of approx. 100, a minimum film-forming temperature of 21, and a density of 1,06. The product is characterized by fast drying and good blocking resistance. It can be used in both one-component and two-component formulations, and can also be combined with other anionic, hydrophilized dispersions, such as polyacrylate and polyurethane dispersions. view less | |
| Bayhydrol® U 241 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U 241 is a polyester polyurethane dispersion used in the formulation of stoving industrial coatings, stoving automotive primer surfaces and two-pack polyurethane primers and top coats for plastics. This product has an OH content, solvent-free o...view more Bayhydrol® U 241 is a polyester polyurethane dispersion used in the formulation of stoving industrial coatings, stoving automotive primer surfaces and two-pack polyurethane primers and top coats for plastics. This product has an OH content, solvent-free of approx. 2.5, a minimum film-forming temperature MFT of approx. 0, and a mean particle size of approx. 50. Bayhydrol® U 241 is a polyester-polyurethane dispersion neutralized with dimethyl ethanol amine which is resistant to hydrolysis. The product can be diluted with water for application and shows no dilution anomalies. Bayhydrol® U 241 can be combined with partially methylated melamine resins to formulate water-dilutable stoving coatings and primers which cure at approx. 120°C. view less | |
| Bayhydrol® UH 2593/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2593/1 is an aliphatic, fatty acid-modified, anionic polyurethane dispersion that is a binder for the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g / 1h / 125°C) ...view more Bayhydrol® UH 2593/1 is an aliphatic, fatty acid-modified, anionic polyurethane dispersion that is a binder for the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g / 1h / 125°C) of 34-36, a viscosity at 23°C, (D=ca.100) of ≤ 250, and a pH (1:2.5in demineralised water) of 7-9. The product was developed specifically for the formulation of one- and two-component wood coating systems. It is characterized by very good wet film transparency, high hardness and good black heel mark resistance. Post-curing of such coatings with Bayhydur® 305 or Bayhydur® 3100, for example, brings additional significant advantages and results in waterborne two-component coatings with even higher mechanical and chemical resistance. The mixing ratio of mill base to hardener solution is generally 10:1. The product is also suitable for use in a wide range of applications thanks to the combination of good application properties and good compatibility with cost-effective PAC dispersions. view less | |
| Bayhydrol® UH 2952/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2952/1 is an aliphatic polyurethane resin dispersion used as a binder for waterborne, air- and oven-drying basecoats in two-layer systems for automotive coatings, coatings for plastics, automotive refinishing coatings and industrial coatings...view more Bayhydrol® UH 2952/1 is an aliphatic polyurethane resin dispersion used as a binder for waterborne, air- and oven-drying basecoats in two-layer systems for automotive coatings, coatings for plastics, automotive refinishing coatings and industrial coatings. This product has an Efflux time at 23°C, (4mmcup) of 10-30, a non-volatile content (1g / 1h / 125°C) of 39-41, and a pH value of 6.5-7.5. When used in two-layer systems with TSA and two-component polyurethane clearcoats, metallic basecoats formulated with Bayhydrol® UH 2952/1 are characterized by even, cloud-free films with a very good metallic effect, excellent gloss and good water resistance. Since it adheres to OEM finishes without prior sanding, the metallic basecoat can also be used for online retouching (45 min at 80°C). The metallic basecoat can be oversprayed with TSA or two-component polyurethane clearcoats after pre-drying e.g. for 5 minutes at an oven temperature of 80°C or for 15 minutes at room temperature. view less | |
| KEPERSURF®-382 | Kito Chem | KEPERSURF®-382 is a water-based non-silicone leveling agent made of a a non-ionic acrylate copolymer solution. It is a colorless to light yellow transparent liquid that is suitable for use in the production of industrial paints. It has good flow-promoting...view more KEPERSURF®-382 is a water-based non-silicone leveling agent made of a a non-ionic acrylate copolymer solution. It is a colorless to light yellow transparent liquid that is suitable for use in the production of industrial paints. It has good flow-promoting properties and can solve cratering problems caused by poor substrate wetting. It is commonly used in water-based coating systems for the manufacturing of water-based wood, industrial and automotive paints. view less | |
| Bayhydrol® A 2651 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2651 is an aqueous hydroxyfunctional polyacrylic secondary dispersion well suited for the formulation of high gloss and matt clear 2K polyurethane coatings, as well as pigmented coatings. This product has a pH (1:3 in demineralised water) val...view more Bayhydrol® A 2651 is an aqueous hydroxyfunctional polyacrylic secondary dispersion well suited for the formulation of high gloss and matt clear 2K polyurethane coatings, as well as pigmented coatings. This product has a pH (1:3 in demineralised water) value of 8-9, an acid value of 8-11.2, and a hydroxyl content solvent-free, calculated to approx. 3. Bayhydrol® A 2651, combined with aliphatic polyisocyanates is well suited for the formulation of high gloss and matt clear 2K polyurethane coatings, as well as pigmented coatings. The product was developed in particular for the formulation of two-component wood coating systems. It is characterized by very good film transparency and high wood warmth. Crosslinking with Bayhydur® XP 2487/1 or XP 2655 yields coatings with very high chemical resistance. view less | |
| KEPERSURF®-381 | Kito Chem | KEPERSURF®-381 is a water-based non-silicone leveling agent made of an ancrylate copolymer solution. It is a colorless to light yellow transparent liquid that is suitable for use in the production of water-based wood, industrial and automotive paints. It ...view more KEPERSURF®-381 is a water-based non-silicone leveling agent made of an ancrylate copolymer solution. It is a colorless to light yellow transparent liquid that is suitable for use in the production of water-based wood, industrial and automotive paints. It can be used to reduce the surface tension of the substrate, increasing the wetting property and promoting mobility while reducing shrinkage. view less | |
| KEPERSURF®-388 | Kito Chem | KEPERSURF®-388 is a water-based non-silicone leveling agent made of a low molecular weight polymer compound. It is a colorless to light yellow transparent liquid that is formulated to help prevent the bubble burst (pinhole problem) in the drying process o...view more KEPERSURF®-388 is a water-based non-silicone leveling agent made of a low molecular weight polymer compound. It is a colorless to light yellow transparent liquid that is formulated to help prevent the bubble burst (pinhole problem) in the drying process of most water-born industrial paints. This product is well suited for use in the production of water-based wood, industrial and automotive paints. view less | |
| KEPERSURF®-195 | Kito Chem | KEPERSURF®-195 is a flatting and leveling agent made of polyether modified polysiloxane solution. It can impart a very high surface tension reduction to most formulations. This additive can be used in water-based, oiliness and UV system with few side effe...view more KEPERSURF®-195 is a flatting and leveling agent made of polyether modified polysiloxane solution. It can impart a very high surface tension reduction to most formulations. This additive can be used in water-based, oiliness and UV system with few side effects, even under the large dosage. It is well suited for use in the production of Wood, industrial, automotive and UV paints, as well as printing inks and water-based printing. view less | |
| SETAQUA® 6801 | Allnex | SETAQUA® 6801 is an aqueous dispersion of acrylic polymers with gradient particle morphology. It is insoluble in organic solvents and has excellent stability. This product is suitable for metallic and solid color waterborne basecoats for the automotive OE...view more SETAQUA® 6801 is an aqueous dispersion of acrylic polymers with gradient particle morphology. It is insoluble in organic solvents and has excellent stability. This product is suitable for metallic and solid color waterborne basecoats for the automotive OEM industry and car refinishing. view less | Request Sample |
| Bayhydrol® A XP 2469 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A XP 2469 is an aqueous hydroxyfunctional polyacrylic dispersion that is in combination with aliphatic polyisocyanates to formulate aqueous two-component clear and top coats for general industrial finishes. This product has a hydroxyl content (...view more Bayhydrol® A XP 2469 is an aqueous hydroxyfunctional polyacrylic dispersion that is in combination with aliphatic polyisocyanates to formulate aqueous two-component clear and top coats for general industrial finishes. This product has a hydroxyl content (calculated on solid resin) of approx. 2.5, an acid value of approx. 8, a flash point that is not flammable up to boiling point, and a density at 20°C of approx. 1.06. Bayhydrol® A XP 2469 has good pigment wetting properties and high shear stability. Bead mills have proved suitable as grinding equipment. Only pigments and extenders with a minimum water-soluble content should be used. Given the many pigments and extenders available, compatibility testing should always be carried out. view less | |
| SETAL® 6306 SS-60 | Allnex | SETAL® 6306 SS-60 is a water-soluble polyester polyol with 2.7% OH for waterborne OEM basecoat applications. It provides good pigment wetting properties, good stabilization of aluminum pigments, and improves film formation and flow. This product is suit...view more SETAL® 6306 SS-60 is a water-soluble polyester polyol with 2.7% OH for waterborne OEM basecoat applications. It provides good pigment wetting properties, good stabilization of aluminum pigments, and improves film formation and flow. This product is suitable for use in waterborne basecoats for the automotive OEM market and in wet-on-wet systems for car refinishing. view less | Request Sample |
| KEPERSURF®-193 | Kito Chem | KEPERSURF®-193 is a flatting and leveling agent made of a polyether modified polysiloxane solution. It is a colorless liquid that can reduce surface tension and improve comprehensive performance in a wide variety of systems including; water-based, oil and...view more KEPERSURF®-193 is a flatting and leveling agent made of a polyether modified polysiloxane solution. It is a colorless liquid that can reduce surface tension and improve comprehensive performance in a wide variety of systems including; water-based, oil and UV systems. It has good slip and scraping resistance and anti-foaming, anti-flooding and anti-cratering properties. This additive is well suited for use in the production of wood, industrial and automotive paints and coatings as well as water-based printing inks. view less | |
| KEPERSURF®-191 | Kito Chem | KEPERSURF®-191 is a flatting and leveling agent made of a polyether modified polysiloxane solution. It is a colorless liquid that can reduce surface tension and improve comprehensive performance in a wide variety of systems including; water-based, oil and...view more KEPERSURF®-191 is a flatting and leveling agent made of a polyether modified polysiloxane solution. It is a colorless liquid that can reduce surface tension and improve comprehensive performance in a wide variety of systems including; water-based, oil and UV systems. It has good slip and scraping resistance and anti-foaming, anti-flooding and anti-cratering properties. This additive is well suited for use in the production of wood, industrial and automotive paints and coatings as well as water-based printing inks. view less | |
| Bayhydrol® A 145 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 145 is a water-reducible, hydrofunctional polyacrylic dispersion that is used in the formulation of aqueous two-pack clear topcoats for vehicle repair applications, heavy transport finishing and industrial coating. It can be used in combination with amino resins or blocked polyisocyanates for waterborne...view more Bayhydrol® A 145 is a water-reducible, hydrofunctional polyacrylic dispersion that is used in the formulation of aqueous two-pack clear topcoats for vehicle repair applications, heavy transport finishing and industrial coating. It can be used in combination with amino resins or blocked polyisocyanates for waterborne, one-component, industrial baking coatings. This product has an acid value of 10 ± 3, a viscosity at 23°C, (D = approx. 40 s-1) of 950 ± 550, and a non-volatile content (1g / 1h / 125°C/ convection oven) of 45 ± 2. Bayhydrol® A 145 has good pigment wetting properties and high shear stability. Bead mills have proved suitable as grinding equipment. Only pigments and extenders with a minimal water-soluble content should be used. Bayhydrol® A 145 combined with aliphatic polyisocyanates yields high-gloss topcoats which can be dried at room temperature or force-dried, e.g. at 80°C. The cured paint films are hard and flexible with good single-coat adhesion and good resistance to solvents and water. view less | |
| Bayhydrol® A 2058 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2058 is an aqueous hydroxyfunctional polyacrylic dispersion used in the formulation of flexible two-component polyurethane top coats and primers for plastics. This product has a non-volatile content (1g / 1h / 125°C / convection oven) of 41 -...view more Bayhydrol® A 2058 is an aqueous hydroxyfunctional polyacrylic dispersion used in the formulation of flexible two-component polyurethane top coats and primers for plastics. This product has a non-volatile content (1g / 1h / 125°C / convection oven) of 41 - 45, a pH (1:3 in demineralised water) of 7.5 - 9.5, and a viscosity at 23°C, (approx.D=82s-1) of 200 - 2,000. Bayhydrol® A 2058 combined with Bayhydur 3100 yields high-gloss flexible top coats which are resistant to solvents. The formulation can be applied as a one-coat system on many substrates and has good adhesion and body. Two-pack primers can be formulated by combining Bayhydrol® A 2058 with Bayhydur® 3100. These are highly suitable for use on thermoplastics and thermosets and are characterised by excellent adhesion, sandability and water resistance. view less | |
| AQUACER 571 | BYK 毕克 | AQUACER 571 is a modified rice bran wax emulsion to improve the surface properties of care products, polishes, and aqueous coating systems. | |
| Bayhydrol® A 2139/2 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2139/2 is an aqueous, fatty acid-modified, hydroxyfunctional polyester/polyacrylate copolymer that can be used in the formulation of two-component polyurethane top coats and primers for plastics. This product has a non-volatile content (1g / ...view more Bayhydrol® A 2139/2 is an aqueous, fatty acid-modified, hydroxyfunctional polyester/polyacrylate copolymer that can be used in the formulation of two-component polyurethane top coats and primers for plastics. This product has a non-volatile content (1g / 1h / 125°C/convection oven) of 45-49, a viscosity at 23°C, (D = approx. 40 s-1) of 1,000 - 2,500, an acid value of 11.5 - 14.5, and a pH (1:4 in demineralised water) value of 6.8 - 7.9. Bayhydrol® A 2139/2 can be combined with Bayhydur® 3100 to yield highgloss solvent-resistant top coats. It is used as a one-coat top coat on many substrates, it has good adhesion and high body. When combined, it can also be used to formulate two-component primers for many thermoplastics and thermosets. view less | |
| Bayhydrol® U XP 2766 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U XP 2766 is a hydroxyfunctional polyester-polyurethane dispersion which can be thinned with water to application viscosity. It is a binder for the formulation of water-reducible 2K-PUR coatings, and is an anionic, hydroxyfunctional polyester-p...view more Bayhydrol® U XP 2766 is a hydroxyfunctional polyester-polyurethane dispersion which can be thinned with water to application viscosity. It is a binder for the formulation of water-reducible 2K-PUR coatings, and is an anionic, hydroxyfunctional polyester-polyurethan dispersion, that is solvent-free. This product has an acid number of approx. 11, a density at 20°C of approx. 1.06, and an OH content (solid resin) of approx. 4.0. Bayhydrol® U XP 2766 is a hydroxyfunctional polyester-polyurethan dispersion which can be thinned with water to application viscosity. In combination with hydrophobic polyisocyanates (e.g. Desmodur® N 3600, N 3900 , XP 2730) and/or with hydrophilic polyisocyanates (e.g. Bayhydur 3100, 304, 305, XP 2487/1, XP 2655) high performance, hard-elastic two-component polurethane-hydrocoatings can be formulated. view less | |
| Bayhydrol® A 2457 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2457 is an anionic polyacrylic dispersion used as a binder in the formulation of water-reducible two-component coatings and sealers for mineral substrates and reactive resins (EP, PU). This product has a non-volatile content (1g / 1h / 125°C ...view more Bayhydrol® A 2457 is an anionic polyacrylic dispersion used as a binder in the formulation of water-reducible two-component coatings and sealers for mineral substrates and reactive resins (EP, PU). This product has a non-volatile content (1g / 1h / 125°C / convection oven) of 38.5 - 41.5, a viscosity at 23°C, D=approx.42s-1 of max. 100, and a pH (1:3 in demineralised water) value of 7.5-9. Due to its outstanding mechanical and chemical resistance properties the product is ideally suited for the formulation of sealers for mineral substrates and reactive resins (EP, PU). In combination with other water-reducible binders, the many potential combination products, compatibility must always be tested. view less | |
| Bayhydrol® UH XP 2592 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH XP 2592 is a Polyester-Polyurethane dispersion which dries by oxidation. It can be used as a binder in the formulation of aqueous air- and forced-drying, high-gloss coatings and primers with very good anti-corrosion properties. Mainly used f...view more Bayhydrol® UH XP 2592 is a Polyester-Polyurethane dispersion which dries by oxidation. It can be used as a binder in the formulation of aqueous air- and forced-drying, high-gloss coatings and primers with very good anti-corrosion properties. Mainly used for general industrial finishes. This product has an acid value of approx. 12, a viscosity at 23°C, (D=approx.40s-1) of approx. 300, a non-volatile content (1g / 1h / 125°C) of approx. 45, and a pH (1:4 in demineralised water) of approx. 7.2. Bayhydrol® UH XP 2592 does not contain any cosolvents, no anti skinning agents and no driers and is therefore label-free. Coatings based on this resin show a quick drying and after drying a quite high hardness. After curing over night a very good water-resistance is achievable. High-gloss coatings, however, need a certain amount of suitable co-solvents and additional amine in the formulation. Bayhydrol® UH XP 2592 can be used as universal resin for high-gloss top coats, effect coats and - due to its excellent anti-corrosion properties – as raw material for primers and single coats. view less | |
| Bayhydrol® U 355 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U 355 is an aliphatic, hydroxyfunctional polyester polyurethane dispersion that is used as binders for the formulation of water-thinnable soft-feel coatings. This product has a viscosity at 23°C, (D = approx. 240 s-1) of 250-650, a non-volatile...view more Bayhydrol® U 355 is an aliphatic, hydroxyfunctional polyester polyurethane dispersion that is used as binders for the formulation of water-thinnable soft-feel coatings. This product has a viscosity at 23°C, (D = approx. 240 s-1) of 250-650, a non-volatile content (1g / 1h / 125°C) of 53-57, and a pH (10% in water) value of 7.0-7.5. Bayhydrol® U 355 can be combined with flexible polyurethane dispersions, e.g. Bayhydrol® UH 240 and UH 340/1, to formulate soft-feel and suede-effect coatings. This product's suitable polyisocyanate components are Bayhydur® 3100, Bayhydur® VP LS 2306 and Bayhydur® VP LS 2319. view less | |
| Aqualac AYDW-112W50 | Aquent Impex | Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epo...view more Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epoxy makes this high performance organic & inorganic compound available with the high performance epoxy resin as a precondition. The outstanding advantage of waterborne epoxy resin lies on that this compound can be cured at atmospheric temperature & humidity with reasonable curing time. It can be mixed with such common cement-based material as cement mortar & concrete to enhance the early strength, tenacity, impact resistance & waterproof ability of above materials with very high cross-linking density. Applications include environmentally friendly, paint, car coatings, and cement floors. view less | |
| Aqualac AYDW-113W50 | Aquent Impex | Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epo...view more Aqualac AYDW-112W50 is a waterborne Epoxy resin that has wonderful prospect of application due to its properties. Especially in terms of the application of this epoxy resin in combination with cement mortar, the introduction of hydrophilic groups into epoxy makes this high performance organic & inorganic compound available with the high performance epoxy resin as a precondition. The outstanding advantage of waterborne epoxy resin lies on that this compound can be cured at atmospheric temperature & humidity with reasonable curing time. It can be mixed with such common cement-based material as cement mortar & concrete to enhance the early strength, tenacity, impact resistance & waterproof ability of above materials with very high cross-linking density. Applications include environmentally friendly, paint, car coatings, and cement floors. view less | |
| Bayhydrol® UH XP 2660 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH XP 2660 is an aliphatic polyester-polyurethane dispersion that is cosolvent-free. It is a combination binder for the formulation of water-reducible soft-feel coatings. This product has an Efflux time at 23°C, (4mmcup) of 10-30, a non-volati...view more Bayhydrol® UH XP 2660 is an aliphatic polyester-polyurethane dispersion that is cosolvent-free. It is a combination binder for the formulation of water-reducible soft-feel coatings. This product has an Efflux time at 23°C, (4mmcup) of 10-30, a non-volatile content (1g / 1h / 125°C) of 39-41, and a pH (10% in water) of 6-8. Bayhydrol® UH XP 2660 can be used as a binder in combination with hydrofunctional resins, preferably Bayhydrol® U 355 or U 475, in the formulation of highly flexible two-component polyurethane topcoats (e.g. in soft-touch coating systems). When crosslinking with e.g. Bayhydur® 3100, force drying (e.g. 30-45 min at 80°C) yields films with good surface handle, very good resistance to solvents and very good hydrolytic stability. view less | |
| Bayhydrol® U XP 2698 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U XP 2698 liphatic, hydroxyfunctional polyester-polyurethane dispersion used as a binder for the formulation of water-reducible soft-touch coatings. This product has an acid number of approx. 8.5, a density at 20°C of approx. 1.07, and an OH co...view more Bayhydrol® U XP 2698 liphatic, hydroxyfunctional polyester-polyurethane dispersion used as a binder for the formulation of water-reducible soft-touch coatings. This product has an acid number of approx. 8.5, a density at 20°C of approx. 1.07, and an OH content of approx. 0.8. Bayhydrol® U XP 2698 can be used in combination with flexible polyurethane dispersions, e.g. Bayhydrol® UH 340/1, UH 650, UH 2305, UH XP 2658 and UH XP 2660 to formulate soft-touch and suede-effect coatings. The suitable polyisocyanate components are Bayhydur® 304, 3100, XP 2655 and also Desmodur® N 3600 and N 3900. view less | |
| Bayhydrol® A 2601 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2601 is a water-reducible, hydroxyfunctional polyacrylate dispersion used in combination with aliphatic polyisocyanates for the formulation of waterborne two-component clearcoats and topcoats for general industrial and transportation coatings...view more Bayhydrol® A 2601 is a water-reducible, hydroxyfunctional polyacrylate dispersion used in combination with aliphatic polyisocyanates for the formulation of waterborne two-component clearcoats and topcoats for general industrial and transportation coatings. It can also be used in combination with suitable melamine resins for the formulation of one-component coatings. This product has a viscosity at 23°C, D=approx.40s-1 of 1,500 - 3,000, a non-volatile content (1g / 1ml toluene / 1h / 125°C) of 44-47, and a pH (1:4 in demineralised water) value of 7-8. This product can be used primarily in combination with Bayhydur® 304, XP 2487/1 and Desmodur® N 3900 for air- and oven-drying industrial coatings. The cured coating film is hard, tough but flexible and exhibits high gloss, good filling power, good weather and light stability, good resistance to solvents and gasoline and rapid drying. It is not recommended for clearcoat applications for wood. view less | |
| Bayhydrol® A 2546 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2546 is a binder used in the formulation of water-reducible, two-component polyurethane coatings and sealers for mineral substrates and reactive resins (EP,PUR), with anionic polyacrylate dispersion. This product has a non-volatile content (1...view more Bayhydrol® A 2546 is a binder used in the formulation of water-reducible, two-component polyurethane coatings and sealers for mineral substrates and reactive resins (EP,PUR), with anionic polyacrylate dispersion. This product has a non-volatile content (1g / 1h / 125°C / convection oven) of 38-42, a viscosity at 23°C, D=approx.45s-1 of max. 200, and a pH (1:3 in demineralised water) value of 7-9. On account of its outstanding mechanical and chemical resistance, the product is particularly suitable for the formulation of sealers for mineral substrates and reactive resins (EP, PUR), in particular when good hot tire resistance is required. The product can also be combined with other water-reducible binders. On account of the many potential co-reactants, compatibility testing should always be carried out. view less | |
| KEPERSURF®-179 | Kito Chem | KEPERSURF®-179 is a flatting and leveling agent made of a polyether modified polysiloxane solution. It is a colorless to yellowish liquid that can reduce surface tension and improve comprehensive performance in a wide variety of systems including; water-b...view more KEPERSURF®-179 is a flatting and leveling agent made of a polyether modified polysiloxane solution. It is a colorless to yellowish liquid that can reduce surface tension and improve comprehensive performance in a wide variety of systems including; water-based, oil and UV systems. It has good slip and scraping resistance and anti-foaming, anti-flooding and anti-cratering properties. This additive is well suited for use in the production of wood, industrial and automotive paints and coatings as well as epoxy floor leveling paints. view less | |
| EXOCOAT™ 143 | Axcentive Sarl | EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS ...view more EXOCOAT® 143 by Axcentive is a solvent-based organometallic resin (60% solids in Butyl acetate). It is characterized by non-sticky, hydrophobic, and oleophobic properties. Provides strong adhesion to steel, aluminum, glass, and plastics like PMMA and ABS as well as to old coating layers. It covalently bonds with the substrate resulting in a very durable finish. It can be used as a standalone resin or might be formulated with other raw materials like white and colored pigments, organic resins, fillers, and additives. The use of water-based raw materials should be avoided. Durability is a unique feature of EXOCOAT® 143. It can sustain mechanical abrasion, and chemical attack and is UV stable. When applied at a very low layer thickness of 0.5 to 2µm it provides the surface with a protective hard coating that shows durable easy-to-clean, dirt resistance, anti-graffiti, and strong water repellency properties. It is suitable for ambient or force-cured, high-performance industrial coatings such as protective, coil, marine, and automotive. EXOCOAT® 143-based paints may be brushed, rolled, or sprayed by HVLP or airless spray. view less | |
| Desmodur® VL | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® VL is an aromatic polyisocyanate based on diphenylmethane diisocyanate that is used in combination with Desmophen grades in solvent-free two-pack polyurethane coatings, fillers, sealing compounds and synthetic resin mortars. It is a brown, solve...view more Desmodur® VL is an aromatic polyisocyanate based on diphenylmethane diisocyanate that is used in combination with Desmophen grades in solvent-free two-pack polyurethane coatings, fillers, sealing compounds and synthetic resin mortars. It is a brown, solvent-free liquid with a low viscosity (25°C) of 90 ± 20 mPa·s. This product has an NCO of 31.5 ± 0.5%, a flash point of approx. 229°C, and an equivalent weight of approx. 133. Desmodur® VL is combined with, for example, Desmophen® 1145, 1150, 1155, 5028 GT and 1380 BT. Depending on the Desmophen® product used, the coatings yielded can be varied from hard to flexible. It is necessary to add water scavengers such as molecular sieve paste® 3 Å to the polyol component to prevent the undesired reaction of Desmodur® VL with water. Systems formulated with Desmodur® VL are suitable for coating concrete, asphalt, fibrous cement and plastics. view less | |
| Nebores® HTP 30-50 | NECARBO B.V. | Nebores® HTP 30-50 is a modified, pentaerythritol-esterified, air-drying alkyd resin based on tung oil and tall oil fatty acids. It provides fast initial drying, excellent through drying, exceptional water resistance, good adhesion on ferrous substrates, ...view more Nebores® HTP 30-50 is a modified, pentaerythritol-esterified, air-drying alkyd resin based on tung oil and tall oil fatty acids. It provides fast initial drying, excellent through drying, exceptional water resistance, good adhesion on ferrous substrates, and low xylene content. This product finds application in anti-corrosive primers, fillers, and primer surfacers for car-repair enamels. view less | |
| Nebores® HLP 21-75 DP | NECARBO B.V. | Nebores® HLP 21-75 DP is an air-drying modified tung and linseed oil based alkyd resin. This brown liquid is 75% in Shellsol™ D25 / Monopropyleneglycol methylether and has through drying properties, is water resistant, and adheres on ferrous substrates. N...view more Nebores® HLP 21-75 DP is an air-drying modified tung and linseed oil based alkyd resin. This brown liquid is 75% in Shellsol™ D25 / Monopropyleneglycol methylether and has through drying properties, is water resistant, and adheres on ferrous substrates. Nebores® HLP 21-75 DP finds application in anti-corrosive primers with reduced solvent discharge, fillers, and primer surfacers for car-repair enamels. view less | |
| Nebores® HLP 21-80 X | NECARBO B.V. | Nebores® HLP 21-80 X is an air-drying modified tung and linseed oil based alkyd resin. This yellow liquid is 80% in xylene and has through drying properties, is water resistant, and adheres on ferrous substrates. Nebores® HLP 21-80 X finds application in ...view more Nebores® HLP 21-80 X is an air-drying modified tung and linseed oil based alkyd resin. This yellow liquid is 80% in xylene and has through drying properties, is water resistant, and adheres on ferrous substrates. Nebores® HLP 21-80 X finds application in anti-corrosive primers with reduced solvent discharge, fillers, and primer surfacers for car-repair enamels. view less | |
| Nebores® HLP 31-60 X | NECARBO B.V. | Nebores® HLP 31-60 X is an air-drying modified tung and tall oil fatty acid based alkyd resin. This light yellow liquid is 60% in xylene and has through drying properties, fast initial drying, and overspray tolerance. Nebores® HLP 31-60 X is water resista...view more Nebores® HLP 31-60 X is an air-drying modified tung and tall oil fatty acid based alkyd resin. This light yellow liquid is 60% in xylene and has through drying properties, fast initial drying, and overspray tolerance. Nebores® HLP 31-60 X is water resistant and adheres on ferrous substrates, finding application in anti-corrosive primers with reduced solvent discharge, fillers, and primer surfacers for car-repair enamels. view less | |
| KITO® EP 4838 | Kito Chem | KITO® EP 4838 is a solvent-based resin made of a modified polyester resin. It is a water white transparent viscous liquid with very good pigment dispersion property, flowing property and compatibility with polyacrylic resin. Also it can impart high fullne...view more KITO® EP 4838 is a solvent-based resin made of a modified polyester resin. It is a water white transparent viscous liquid with very good pigment dispersion property, flowing property and compatibility with polyacrylic resin. Also it can impart high fullness, light color, high gloss and hardness to a variety of formulations. This additive is well suited for use in the production of colored topcoats and overcoat varnish of automobile, high weather resistance industrial overcoat vanishs. view less | |
| KITO® EP 4811 | Kito Chem | KITO® EP 4811 is a solvent-based resin made of a modified polyester resin. it is a water white transparent viscous liquid with good compatibility with TPA and thermosetting polyacrylic resin. It can impart excellent flexibly property, adhesion and impact ...view more KITO® EP 4811 is a solvent-based resin made of a modified polyester resin. it is a water white transparent viscous liquid with good compatibility with TPA and thermosetting polyacrylic resin. It can impart excellent flexibly property, adhesion and impact resistance to a variety of formulations. As well as good gloss and color persistence with Yellowing resistance and exterior durability. This additive is well suited for use in the production of pigments concentration, high quality industrial paints, motorcycle and automobile paints. view less |
