| 2-HEMA-Phosphate | Kowa American Corporation | 2-HEMA-Phosphate is a monomer with a functional phosphate group. It offers improved corrosion resistance, better adhesion to metal substrates as well as other difficult substrates, and requires less surface preparation. Besides polymer systems, 2-HEMA-Pho...weiterlesen 2-HEMA-Phosphate is a monomer with a functional phosphate group. It offers improved corrosion resistance, better adhesion to metal substrates as well as other difficult substrates, and requires less surface preparation. Besides polymer systems, 2-HEMA-Phosphate can be used in pigment systems to promote adhesion. verkürzen | Request Sample |
| 2,2-Dibromo-3-Nitrilopropionamide (DBNPA) | ChemFine International Co., Ltd. | 2,2-Dibromo-3-Nitrilopropionamide (DBNPA) is a kind of wide spectrum, high efficiency, industrial germicide that can be used in paint and as an adhesive. | |
| 3-Glycidoxypropyltriethoxysilane | Dalian Onichem Co., Ltd. | 3-Glycidoxypropyltriethoxysilane is an adhesion promoter in polysulfide, urethane, epoxy and acrylic caulks, sealants, adhesives and coatings. | Request Sample |
| A-675-100% | Designer Molecules | A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces...weiterlesen A-675-100% is a Bis(Glyceryl Dimethacrylate) Pyromellitate liquid additive. This product is most commonly used as an additive in adhesive applications. The four methacrylate groups and two carboxylic groups per molecule allow bonding to a variety surfaces. verkürzen | |
| AC-21 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-21 is a modified amino saline primarily used as an adhesion promoter and comes as a light yellowish liquid. It can be used to enhance polymeric coatings, and as a binder to glass and metallic substrate. It can also be used as a coating material for epo...weiterlesen AC-21 is a modified amino saline primarily used as an adhesion promoter and comes as a light yellowish liquid. It can be used to enhance polymeric coatings, and as a binder to glass and metallic substrate. It can also be used as a coating material for epoxy, silicone, acrylic and polyurethane. verkürzen | |
| AC-62 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-62 is a N-β-aminoethylaminopropyl trimethoxysilane with the chemical formula of H2NC2H4NHC3H6Si(OCH3)3 and comes as a clear to slightly yellowish liquid. Primarily used as a coupling agent in mineral reinforced Nylon 6, Nylon 66, PBT. AC-62 can be used...weiterlesen AC-62 is a N-β-aminoethylaminopropyl trimethoxysilane with the chemical formula of H2NC2H4NHC3H6Si(OCH3)3 and comes as a clear to slightly yellowish liquid. Primarily used as a coupling agent in mineral reinforced Nylon 6, Nylon 66, PBT. AC-62 can be used as an additive in foundry and abrasive thermosetting resin. verkürzen | |
| AC-626 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-626 is an N,N Bis{3-(trimethoxysilyl)propyl} ethylene diamine with the chemical formula CH2NH(CH2)3Si(OCH3)3 and comes as a clear to slightly yellowish liquid. It is primarily used as a coupling agent in mineral reinforced Nylon 6, Nylon 66, PBT. AC-62...weiterlesen AC-626 is an N,N Bis{3-(trimethoxysilyl)propyl} ethylene diamine with the chemical formula CH2NH(CH2)3Si(OCH3)3 and comes as a clear to slightly yellowish liquid. It is primarily used as a coupling agent in mineral reinforced Nylon 6, Nylon 66, PBT. AC-626 can also be used as an additive in foundry and abrasive thermosetting resin. verkürzen | |
| AC-63 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-63 is a γ-Methacryloxypropyl trimethoxysilane and comes as a clear, colorless liquid. Primarily used as an additive in mineral reinforced PET, AC-63 can be used to improve adhesion and coupling in free radical cured resin to inorganic glass fibers, cla...weiterlesen AC-63 is a γ-Methacryloxypropyl trimethoxysilane and comes as a clear, colorless liquid. Primarily used as an additive in mineral reinforced PET, AC-63 can be used to improve adhesion and coupling in free radical cured resin to inorganic glass fibers, clay and silicas. verkürzen | |
| AC-65 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-65 is a γ-Aminopropyl triethoxysilane with the chemical formula H2NC3H6Si(OC2H5)3 and comes as a clear to slightly yellowish liquid. Primarily used as a primer or additive in phenolic resin. It can be used as a pre-treatment in filler and pigments for ...weiterlesen AC-65 is a γ-Aminopropyl triethoxysilane with the chemical formula H2NC3H6Si(OC2H5)3 and comes as a clear to slightly yellowish liquid. Primarily used as a primer or additive in phenolic resin. It can be used as a pre-treatment in filler and pigments for adhesive and sealant production. verkürzen | |
| AC-66 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-66 is a γ-Glycidopropyl trimethoxysilane with the chemical formula CH2OCHCH2OC3H6Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used as an additive to improve acrylic emulsion adhesion, AC-66 can be used as an adhesion promotor in polymer ...weiterlesen AC-66 is a γ-Glycidopropyl trimethoxysilane with the chemical formula CH2OCHCH2OC3H6Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used as an additive to improve acrylic emulsion adhesion, AC-66 can be used as an adhesion promotor in polymer to glass and metallic substrates. verkürzen | |
| AC-661 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-661 is a γ-Glycidopropyl methyl dimethoxysilane with the chemical formula CH2OCHCH2OC3H6SiCH3(OCH3)2 and comes as a clear colorless liquid. Primarily used as an additive to improve acrylic emulsion adhesion, AC-661 can be used as an adhesion promotor i...weiterlesen AC-661 is a γ-Glycidopropyl methyl dimethoxysilane with the chemical formula CH2OCHCH2OC3H6SiCH3(OCH3)2 and comes as a clear colorless liquid. Primarily used as an additive to improve acrylic emulsion adhesion, AC-661 can be used as an adhesion promotor in polymer to glass as well as in metallic substrates. verkürzen | |
| AC-662 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-662 is a γ-Glycidopropyl methyl diethoxysilane with the chemical formula of CH2OCHCH2OC3H6SiCH3(OC2H5)2 and comes as clear colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-662 can be used as an adhesion...weiterlesen AC-662 is a γ-Glycidopropyl methyl diethoxysilane with the chemical formula of CH2OCHCH2OC3H6SiCH3(OC2H5)2 and comes as clear colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-662 can be used as an adhesion promoter to enhance polymer coating as well as a binder to glass and metal substrates. verkürzen | |
| AC-66(E) | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-66(E) is a γ-Glycidoxypropyl triethoxysilane with the chemical formula CH2OCHCH2OC3H6Si(OCH5)3 and comes as a clear, colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-66(E) can be used as an adhesion pro...weiterlesen AC-66(E) is a γ-Glycidoxypropyl triethoxysilane with the chemical formula CH2OCHCH2OC3H6Si(OCH5)3 and comes as a clear, colorless liquid. Primarily used as an additive to enhance adhesion in acrylic emulsion system, AC-66(E) can be used as an adhesion promotor to enhance polymer coating and as a binder to glass and metal substrates. verkürzen | |
| AC-67 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-67 is an β-(3,4-Epoxycyclohexyl) ethyltrimethoxysilane with the chemical structure CH2CH2Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used in the production of adhesives and sealants, AC-67 can be used as an additive to improve acrylic e...weiterlesen AC-67 is an β-(3,4-Epoxycyclohexyl) ethyltrimethoxysilane with the chemical structure CH2CH2Si(OCH3)3 and comes as a clear, colorless liquid. Primarily used in the production of adhesives and sealants, AC-67 can be used as an additive to improve acrylic emulsions as well as used for filler in glass fiber surface treatments. verkürzen | |
| AC-68 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-68 is a β-(3,4-Epoxycyclohexyl)ethyltriethoxysilane with the chemical structure CH2CH2Si(OC2H5)3 and comes as a clear, transparent liquid. Primarily used in the production of adhesives and sealants, AC-68 can be used as an additive to improve acrylic e...weiterlesen AC-68 is a β-(3,4-Epoxycyclohexyl)ethyltriethoxysilane with the chemical structure CH2CH2Si(OC2H5)3 and comes as a clear, transparent liquid. Primarily used in the production of adhesives and sealants, AC-68 can be used as an additive to improve acrylic emulsion in adhesives as well as a filler in glass fiber surface treatments. verkürzen | |
| AC-77 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-77 is a Vinyltris-(2-methoxyethoxysilane) with the chemical formula H2C=CHSi(OCH2CH2OCH3)3 and comes as a clear liquid. Primarily used as a cross-linker in vinyl-acrylic emulsion systems, AC-77 can be used as an additive mineral filled polymers and oth...weiterlesen AC-77 is a Vinyltris-(2-methoxyethoxysilane) with the chemical formula H2C=CHSi(OCH2CH2OCH3)3 and comes as a clear liquid. Primarily used as a cross-linker in vinyl-acrylic emulsion systems, AC-77 can be used as an additive mineral filled polymers and other rubber chemicals as an adhesion promoter for paints and coatings. verkürzen | |
| ACRESIN® A 204 UV | BASF Dispersions & Resins | acResin® A 204 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for label applications, as well as some tape and specialty applications, w...weiterlesen acResin® A 204 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for label applications, as well as some tape and specialty applications, which require coat weights up to 80 g/m2 (3 mils). Depending on the application, it may be useful as a solvent acrylic PSA replacement. verkürzen | |
| ACRESIN® A 250 UV | BASF Dispersions & Resins | acResin® A 250 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require ...weiterlesen acResin® A 250 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require coat weights up to 180 g/m2 (6.7 mils). Depending on the application, it may be useful as a solvent acrylic PSA replacement. verkürzen | |
| ACRESIN® A 260 UV | BASF Dispersions & Resins | acResin® A 260 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require ...weiterlesen acResin® A 260 UV is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used in the production of pressure sensitive adhesives for various types of label, tape and specialty applications which require coat weights up to 100 g/m2 (3.8 mils). Depending on the application, it may be useful as a solvent acrylic PSA replacement. verkürzen | |
| ACRESIN® UV 3532 | BASF Dispersions & Resins | acResin® UV 3532 is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used as a pressure sensitive adhesive (PSA) in the production of removable labels, tapes and specialties which require coat weight...weiterlesen acResin® UV 3532 is a UV cross linkable acrylic hot melt polymer used in the production of self-adhesive articles. It may be used as a pressure sensitive adhesive (PSA) in the production of removable labels, tapes and specialties which require coat weights up to ~40 g/m2 (1.5 mils). By virtue of its low glass transition temperature, it may also be used as a freezer grade adhesive in various applications. verkürzen | |
| ACRONAL® 4 D | BASF Dispersions & Resins | Acronal® 4 D is a dispersion of a polyacrylic acid butyl ester in water used to manufacture pressure-sensitive adhesives for self-adhesives articles. | |
| ACRONAL® 4032 X | BASF Dispersions & Resins | Acronal® 4032 X is an acrylic dispersion polymer with moderate to high adhesion, excellent clarity and wet-cut, and good water resistance. This product is suitable for permanent general purpose paper labels and film labels. | |
| ACRONAL® 4053 X | BASF Dispersions & Resins | Acronal® 4053 X is a water-based dispersion polymer for liquid applied sound damping (LASD) application. It is a medium Tg acrylic dispersion polymer. It has a lower viscosity than Acronal® DS 3502 for easier handling and blending. | |
| ACRONAL® A 110 | BASF Dispersions & Resins | Acronal® A 110 is an aqueous dispersion of an acrylate copolymer which contains carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used to manufacture pressure-sensitive adhesives for remova...weiterlesen Acronal® A 110 is an aqueous dispersion of an acrylate copolymer which contains carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used to manufacture pressure-sensitive adhesives for removable paper labels. The plasticizers that are normally employed in these adhesives can be largely eliminated, and in some cases dispensed with completely. verkürzen | |
| ACRONAL® A 145 | BASF Dispersions & Resins | Acronal® A 145 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plast...weiterlesen Acronal® A 145 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type of quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. verkürzen | |
| ACRONAL® A 220 NA | BASF Dispersions & Resins | Acronal® A 220 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. Acronal® A 220 na is a versatile acrylic polymer. Excellent clarity and non-yell...weiterlesen Acronal® A 220 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. Acronal® A 220 na is a versatile acrylic polymer. Excellent clarity and non-yellowing characteristics make it ideal for film label or clear tape applications. For paper labels, it is an excellent base for both non-tackified and tackified applications. verkürzen | |
| ACRONAL® A 240 NA | BASF Dispersions & Resins | Acronal® A 240 na is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used in the manufacture of self-adhesive labels, films and t...weiterlesen Acronal® A 240 na is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used to manufacture pressure-sensitive adhesives for self-adhesive articles. This product is used in the manufacture of self-adhesive labels, films and tapes. Due to excellent plasticizer resistance, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type and quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. verkürzen | |
| ACRONAL® A 245 | BASF Dispersions & Resins | Acronal® A 245 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plast...weiterlesen Acronal® A 245 is an aqueous dispersion of an acrylate copolymer containing carboxyl groups. It is used in the manufacture of self-adhesive labels, films and tapes. As it is hardly affected by plasticizers, it is particularly recommended for coating plasticized PVC film. However, since the effect of plasticizers on pressure-sensitive adhesives depends on the type of quantity of the plasticizers in the film, thorough trials, particularly storage trials, must be carried out before starting production of such articles. verkürzen | |
| ACRONAL® DS 3502 | BASF Dispersions & Resins | Acronal® DS 3502 is an aqueous dispersion of an acrylic acid ester copolymer. It is a polymer dispersion used to manufacture packaging, laminating and flock-coating adhesives. This product can also be employed as a binder for acoustic compounds. Acronal® ...weiterlesen Acronal® DS 3502 is an aqueous dispersion of an acrylic acid ester copolymer. It is a polymer dispersion used to manufacture packaging, laminating and flock-coating adhesives. This product can also be employed as a binder for acoustic compounds. Acronal® DS 3502 adheres well to a variety of different materials. It can be employed as an adhesive, or it can be added to other polymer dispersions, in order to boost their adhesion. It is used on the manufacture of adhesives for packaging, plastic to paper or board lamination, fabric lamination and flock coating. Acronal® DS 3502 can also be used as a binder for acoustic compounds with maximum noise suppression in the 10 – 20°C range. verkürzen | |
| ACRONAL® DS 3570 NA | BASF Dispersions & Resins | Acronal® DS 3570 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles with high tack. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sen...weiterlesen Acronal® DS 3570 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive articles with high tack. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles. Coatings made with Acronal® DS 3570 na exhibits excellent adhesion to low energy surfaces such as polyethylene and polypropylene and also provides good water resistance. It is suitable for use as an adhesive for filmic labels. verkürzen | |
| ACRONAL® DS 3598 NA | BASF Dispersions & Resins | Acronal® DS 3598 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. This product is a versatile acrylic polymer. Excellent clarity and non-yellowi...weiterlesen Acronal® DS 3598 na is an acrylic dispersion used to manufacture pressure-sensitive adhesives for self-adhesive paper and film labels requiring clarity and polyolefin adhesion. This product is a versatile acrylic polymer. Excellent clarity and non-yellowing characteristics make it ideal for film label or clear tape applications. For paper labels, it is an excellent base for both non-tackified and tackified applications. verkürzen | |
| ACRONAL® LA 449 S | BASF Dispersions & Resins | Acronal® LA 449 S is an aqueous polymer dispersion for the manufacture of pressure sensitive adhesives for self-adhesive articles. | |
| ACRONAL® N 284 NA | BASF Dispersions & Resins | Acronal® N 284 na is an acrylic dispersion containing acrylonitrile. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles with high tack. This product forms a film with good immediate tack, high peel strength and good cohesio...weiterlesen Acronal® N 284 na is an acrylic dispersion containing acrylonitrile. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles with high tack. This product forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles. Coatings that contain Acronal® N 284 na also have good adhesive properties at low temperatures, are relatively insensitive to water, and adhere very well to films of plasticized and unplasticized PVC, polyester and electrically treated polyolefin films, even without an adhesion promoter. verkürzen | |
| ACRONAL® NX 2160 | BASF Dispersions & Resins | Acronal® NX 2160 is an aqueous acrylate copolmyer emulsion intended for the production of pressure-sensitive adhesives that exhibit adhesion performance over a wide temperature range. It forms a film with good immediate tack, high peel strength and good c...weiterlesen Acronal® NX 2160 is an aqueous acrylate copolmyer emulsion intended for the production of pressure-sensitive adhesives that exhibit adhesion performance over a wide temperature range. It forms a film with good immediate tack, high peel strength and good cohesion. It is used to manufacture pressure-sensitive adhesives for self-adhesives articles, particularly those applications requiring adhesion at low temperatures. Coatings that contain Acronal® NX 2160 also have good adhesive properties at low temperatures, are relatively insensitive to water, and adhere very well to films of plasticized and unplasticized PVC, polyester and electrically treated polyolefon films, even without an adhesion promoter. verkürzen | |
| ACRONAL® NX 2278 X | BASF Dispersions & Resins | Acronal® NX 2278 is an APEO-free, self-cross linking, aqueous adhesive dispersion used for the manufacture of pressure-sensitive adhesives for self-adhesive articles. | |
| ACRONAL® NX 4569 | BASF Dispersions & Resins | Acronal® NX 4569 is a non-APEO styrene-acrylic binder with excellent balance of properties. It is suitable for use as a binder for nonwovens composed of polyester and glass fibers, facer coatings, masking tape, and wall coverings. This product is also sui...weiterlesen Acronal® NX 4569 is a non-APEO styrene-acrylic binder with excellent balance of properties. It is suitable for use as a binder for nonwovens composed of polyester and glass fibers, facer coatings, masking tape, and wall coverings. This product is also suitable for disposable applications such as medical/hygiene and wipes, and flooring adhesives. verkürzen | |
| ACRONAL® NX 5818 | BASF Dispersions & Resins | Acronal® NX 5818 is an aqueous dispersion of an n-butyl acrylate-acrylonitrile-styrene copolymer. It does not contain plasticizers or solvents, and it is used as a binder for filtration and other nonwovens applications. This product is a sturdy, resilient...weiterlesen Acronal® NX 5818 is an aqueous dispersion of an n-butyl acrylate-acrylonitrile-styrene copolymer. It does not contain plasticizers or solvents, and it is used as a binder for filtration and other nonwovens applications. This product is a sturdy, resilient binder having good abrasion resistance for a variety of applications. Acronal® NX 5818 has good strength in the presence of oil or water. Acronal® NX 5818 imparts stiffness and pleatability to filter media (good for making folded pleats). verkürzen | |
| ACRONAL® S 504 NA | BASF Dispersions & Resins | Acronal® S 504 na is a versatile dispersion used as the base polymer for paper strengthening via saturation, and also finds utility as a binder in sound damping and adhesives applications. | |
| ACRONAL® V 210 NA | BASF Dispersions & Resins | Acronal® V 210 na is a pressure sensitive flooring adhesive binder with high solids, low viscosity, high adhesion and tack. Benefits include low formaldehyde content, low VOCs and non-ammonia. | |
| ACRONAL® V 275 NA | BASF Dispersions & Resins | Acronal® V 275 na is a high solids acrylic used in flooring adhesives and specialty sealants. It offers high cohesive strength, good plasticizer resistance, and filler acceptance. This product is ammonia free. | |
| Andisil 1110 Silane | AB Specialty Silicones | Andisil 1110 Silane is an amino silane coupling agent. It is used to provide bonds between inorganic substrates and organic polymers. Andisil 1110 Silane is recommended for fiberglass reinforced composites. It can also be used as an adhesion promoter in R...weiterlesen Andisil 1110 Silane is an amino silane coupling agent. It is used to provide bonds between inorganic substrates and organic polymers. Andisil 1110 Silane is recommended for fiberglass reinforced composites. It can also be used as an adhesion promoter in RTV silicones, ABC, PVC, and polystyrene. verkürzen | |
| Andisil 1120 Silane | AB Specialty Silicones | Andisil 1120 Silane is an amino silane that is used as a coupling agent. It can be used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, and others. Acceptable polymers include bulyl, polyurethane ...weiterlesen Andisil 1120 Silane is an amino silane that is used as a coupling agent. It can be used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, and others. Acceptable polymers include bulyl, polyurethane (2K), cellulosis, PVB, epoxy, silylated polyether, and more. verkürzen | |
| Andisil 1122 Silane | AB Specialty Silicones | Andisil 1122 Silane is a diamine functional silane coupling agent. It is used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, etc. Andisil 1122 Silane can be used with polymers such as bulyl, poly...weiterlesen Andisil 1122 Silane is a diamine functional silane coupling agent. It is used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, etc. Andisil 1122 Silane can be used with polymers such as bulyl, polyurethane (2K), cellulosis, PVB, epoxy, silylated polyether, silylated polyurethane, nulamine, and others. verkürzen | |
| Andisil 1130 Silane | AB Specialty Silicones | Andisil 1130 Silane is a triamine functional propyltrimethoxysilane coupling agent. It is used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, etc. Andisil 1130 Silane can be used with polymers su...weiterlesen Andisil 1130 Silane is a triamine functional propyltrimethoxysilane coupling agent. It is used to promote adhesion between resins that react with amino groups and the surfaces of glass, mineral, metal, etc. Andisil 1130 Silane can be used with polymers such as bulyl, polyurethane (2K), cellulosis, PVB, epoxy, silylated polyether, silylated polyurethane, nulamine, and others. verkürzen | |
| Andisil 1170 Silane | AB Specialty Silicones | Andisil 1170 Silane is a bis(trimethoxysilylpropyl)amine amino silane. It is used as an adhesive and sealant. | |
| Andisil 1289 Silane | AB Specialty Silicones | Andisil 1289 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a bifunctional polysulfide silane used as an adhesion promoter for precious metals. Andisil 1289 Silane can also be used as a coupling agent and vulcanizing agent fo...weiterlesen Andisil 1289 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a bifunctional polysulfide silane used as an adhesion promoter for precious metals. Andisil 1289 Silane can also be used as a coupling agent and vulcanizing agent for rubbers. verkürzen | |
| Andisil 171 Silane | AB Specialty Silicones | Andisil 171 Silane is a colorless, transparent liquid vinyl silane. It can be used as a crosslinking agent, adhesion promoter, and/or surfaces modifier since it can bind chemically with both inorganic and organic polymers. Andisil 171 Silane improves adhe...weiterlesen Andisil 171 Silane is a colorless, transparent liquid vinyl silane. It can be used as a crosslinking agent, adhesion promoter, and/or surfaces modifier since it can bind chemically with both inorganic and organic polymers. Andisil 171 Silane improves adhesion between glass, mineral, and metal surfaces and provides elongation, flexibility, and spreading. verkürzen | |
| Andisil 174 Silane | AB Specialty Silicones | Andisil 174 Silane is a methacryl-functional silane adhesion promoter. It can be used as a strength improver in reinforced polyester composites and reinforced polyester resin composites. Andisil 174 Silane can also be used as a coupling agent, crosslinkin...weiterlesen Andisil 174 Silane is a methacryl-functional silane adhesion promoter. It can be used as a strength improver in reinforced polyester composites and reinforced polyester resin composites. Andisil 174 Silane can also be used as a coupling agent, crosslinking agent, and blend additive. verkürzen | |
| Andisil 189 Silane | AB Specialty Silicones | Andisil 189 Silane is a colorless to pale yellow transparent liquid sulfur silane. It is a mercapto-functional silane coupling agent for polysulfide and polyurethane caulks and sealants. Andisil 189 Silane improves adhesion to glass and metal surfaces. | |
| Andisil 2120 Silane | AB Specialty Silicones | Andisil 2120 Silane is a diamino-functional silane that provides elongation, flexibility, and spreading at the interface as a coupling agent. It is used to improve adhesion between glass, mineral, and metal surface and aminoreactive resins. | |
| ARBOCEL® CE 2906 HF 50 LV | J. Rettenmaier & Söhne GmbH & Co. KG | ARBOCEL® CE 2906 HF 50 LV is a low viscosity hydroxypropyl methyl cellulose in powder form. It is solvable in water and forms a reversible gel above a specific gelling temperature. ARBOCEL® CE 2906 HF 50 LV can also be used to increase tack and form trans...weiterlesen ARBOCEL® CE 2906 HF 50 LV is a low viscosity hydroxypropyl methyl cellulose in powder form. It is solvable in water and forms a reversible gel above a specific gelling temperature. ARBOCEL® CE 2906 HF 50 LV can also be used to increase tack and form transparent and flexible films which show oil barrier properties. JRS products are based on natural materials. We strive to maximize the value of plant based sidestreams via extracting biodegradable additives for manifold applications. With our regrowing fibers and polymers, sustainability and functionality are introduced in composites, adhesives and many more products. verkürzen | |
| ARBOCEL® CE 2910 HE 50 LV | J. Rettenmaier & Söhne GmbH & Co. KG | ARBOCEL® CE 2910 HE 50 LV is a low viscosity hydroxypropyl methyl cellulose in powder form. It is solvable in water and forms a reversible gel above a specific gelling temperature. ARBOCEL® CE 2910 HE 50 LV can also be used to increase tack and form trans...weiterlesen ARBOCEL® CE 2910 HE 50 LV is a low viscosity hydroxypropyl methyl cellulose in powder form. It is solvable in water and forms a reversible gel above a specific gelling temperature. ARBOCEL® CE 2910 HE 50 LV can also be used to increase tack and form transparent and flexible films which show oil barrier properties. JRS products are based on natural materials. We strive to maximize the value of plant based sidestreams via extracting biodegradable additives for manifold applications. With our regrowing fibers and polymers, sustainability and functionality are introduced in composites, adhesives and many more products. verkürzen | |
| Bis-[3-(Triethoxysilyl)Propyl]Amine | Dalian Onichem Co., Ltd. | Bis-[3-(Triethoxysilyl)Propyl]Amine is an efficient crosslinking agent used for polyurethane prepolymer endcapping with good adhesion to difficult substrates. | Request Sample |
| Bis-[3-(Trimethoxysilyl)Propyl]Amine | Dalian Onichem Co., Ltd. | Bis-[3-(Trimethoxysilyl)Propyl]Amine is an efficient crosslinking agent used for polyurethane prepolymer endcapping with good adhesion to difficult substrates. | Request Sample |
| Bisomer® LMA 97SP | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® LMA 97SP is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg). It is excellent at imparting flexibility when used as a polymerisable plasticiser. Products containing Bisomer® LMA 97SP exhibit reduced ...weiterlesen Bisomer® LMA 97SP is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg). It is excellent at imparting flexibility when used as a polymerisable plasticiser. Products containing Bisomer® LMA 97SP exhibit reduced variation in properties such as viscosity, pigment wetting, chemical resistance, adhesion, hardness, sheer strength and tack. This product is a key raw material for the synthesis of high quality acrylic resins for a wide range of applications, including industrial coatings, printing inks and pressure sensitive adhesive applications. verkürzen | |
| BMI-1500 | Designer Molecules | BMI-1500 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1500 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BMI-1700 | Designer Molecules | BMI-1700 is a viscous amber liquid form bismaleimide oligomer. This product exhibits good adhesion to a variety of substrates. BMI-1700 is most commonly used in adhesives as an additive or base resin, for high temperature applications. | |
| BUTOFAN® NS 144 | BASF Dispersions & Resins | Butofan® NS 144 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer. It is used in the manufacture of laminating and pressure-sensitive adhesives.This product is suitable for general purpose adhesives requiring high specific adhesion to...weiterlesen Butofan® NS 144 is an aqueous dispersion of a carboxylated styrene/butadiene copolymer. It is used in the manufacture of laminating and pressure-sensitive adhesives.This product is suitable for general purpose adhesives requiring high specific adhesion to a variety of substrates. It can also be used to manufacture pressure-sensitive adhesives for self-adhesive products. This is often done in combination with tackifier resins. verkürzen | |
| BUTOFAN® NS 166 | BASF Dispersions & Resins | Butofan® NS 166 is an aqueous polymer dispersion used to manufacture pressure-sensitive adhesives for self-adhesive products. It is suitable for General purpose adhesives requiring high specific adhesion to a variety of substrates. This product can also b...weiterlesen Butofan® NS 166 is an aqueous polymer dispersion used to manufacture pressure-sensitive adhesives for self-adhesive products. It is suitable for General purpose adhesives requiring high specific adhesion to a variety of substrates. This product can also be used to manufacture pressure-sensitive adhesives for self-adhesive products. This is often done in combination with tackifier resins. verkürzen | |
| BUTOFAN® NS 209 | BASF Dispersions & Resins | Butofan® NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives...weiterlesen Butofan® NS 209 is a carboxylated styrene-butadiene binder with a good balance of tensile strength and elongation and excellent barrier properties. It is suitable for use with cellulosic materials, cellulosic filters, gaskets and felts, flooring adhesives and as saturant for masking tapes. verkürzen | |
| BUTOFAN® NS 222 | BASF Dispersions & Resins | Butofan® NS 222 is a styrene butadiene dispersion for use in flooring adhesives and waterproofing, providing desirable balance of cohesion, tack and superior water resistance. It is non-APEO. | |
| CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...weiterlesen CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. verkürzen | |
| CERAMER™ 1608 | Univar Solutions | CERAMER™ 1608 is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. Although these polymers have similar or ...weiterlesen CERAMER™ 1608 is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. Although these polymers have similar or higher acid numbers than oxidized products, they are much harder with higher melting points. verkürzen | Request Sample |
| CERAMER™ 67 | Univar Solutions | CERAMER™ 67 is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. Although these polymers have similar or hi...weiterlesen CERAMER™ 67 is formed by grafting maleic anhydride derivatives onto hydrocarbon polymers in a manner that adds high levels of acid and ester functionality without significantly degrading the hydrocarbon backbone. Although these polymers have similar or higher acid numbers than oxidized products, they are much harder with higher melting points. verkürzen | Request Sample |
| CF1-135 | NuSil Silicone Technology 1 | CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different subst...weiterlesen CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different substrates such as metals, ceramics, glass, some plastics and other silicone material. It is a one-component primer that is supplied in VM&P Napththa and it requires no mixing. verkürzen | |
| CF1-141 | NuSil Silicone Technology 1 | CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air...weiterlesen CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air dries. This primer improves adhesion of addition-cured systems to various substrates such as glass, metals, plastics, ceramics and other silicone materials. verkürzen | |
| CF2-135 | NuSil Silicone Technology 1 | CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as woo...weiterlesen CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as wood, metals, ceramics, plastics, and other silicone materials. For the best bonding results, be sure that the surface being primed is clean and degreased. verkürzen | |
| CF6-135 | NuSil Silicone Technology 1 | CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product wil...weiterlesen CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product will improve the adhesion of addition-cured systems to many different substrates such as glass, metals, plastics, ceramics and other silicone material. verkürzen | |
| Chlorinated Rubber-YURON CR-130 | Yuron New Material | YURON CR-130 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents, such as toluene or xylene, and it is also soluble in most est...weiterlesen YURON CR-130 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents, such as toluene or xylene, and it is also soluble in most esters. verkürzen | |
| Chlorinated Rubber-YURON CR-170 | Yuron New Material | YURON CR-170 is a chlorinated rubber product supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene, and it is also soluble in...weiterlesen YURON CR-170 is a chlorinated rubber product supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents such as toluene or xylene, and it is also soluble in most esters. verkürzen | |
| CN374 | Sartomer Americas | CN374 is an amine modified acrylate used to dramatically increase surface cure speed when used in combination with a Type-II photoinitiator. To realize an effect, generally less than 10% of CN374 is needed in a formulation. The main applications for CN374...weiterlesen CN374 is an amine modified acrylate used to dramatically increase surface cure speed when used in combination with a Type-II photoinitiator. To realize an effect, generally less than 10% of CN374 is needed in a formulation. The main applications for CN374 are coatings, with a focus on the overprint varnishes. verkürzen | |
| CS-783 | Designer Molecules | CS-783 is a yellow liquid methacrylated epoxy. This product features dual cure mechanisms, low chloride, multifunctional, low viscosity, and UV curable. CS-783 is most commonly used in adhesion promoting applications. | |
| CV-1143 | NuSil Silicone Technology 1 | CV-1143 is a silicone adhesive/sealant that is best used in applications that require low outgassing and minimal volatile condensables under extreme operating conditions. It is also used as a bond and sealant in applications such as overhead or vertical j...weiterlesen CV-1143 is a silicone adhesive/sealant that is best used in applications that require low outgassing and minimal volatile condensables under extreme operating conditions. It is also used as a bond and sealant in applications such as overhead or vertical joints that require a non-slumping, and one-part materials. verkürzen | |
| CV1-2566 | NuSil Silicone Technology 1 | CV1-2566 is a red RTV silicone that can be used as an adhesive to help control high vacuum environments in electronic and space applications. This product can also withstand hazards such as extreme high or low temperatures. If an application requires low ...weiterlesen CV1-2566 is a red RTV silicone that can be used as an adhesive to help control high vacuum environments in electronic and space applications. This product can also withstand hazards such as extreme high or low temperatures. If an application requires low outgassing this is the ideal sealant for the job. verkürzen | |
| CV10-2568 | NuSil Silicone Technology 1 | CV10-2568 is a two part RTV ablative silicone that can be used as a bonding, sealing, or potting material in electronic and space applications. This product will provide radiation resistance, low thermal conductivity, oxidation stability and thermal stabi...weiterlesen CV10-2568 is a two part RTV ablative silicone that can be used as a bonding, sealing, or potting material in electronic and space applications. This product will provide radiation resistance, low thermal conductivity, oxidation stability and thermal stability. It can also be especially useful to bond solar cells to solar array panels as it has a broad operating temperature range. verkürzen | |
| CV14-2500 | NuSil Silicone Technology 1 | CV14-2500 is a controlled volatility silicone system that incorporates an adhesion promoter and has a low viscosity. It can serve as a potting or embedding compound for electronic components to provide protection from extreme, radiation, humidity, mechani...weiterlesen CV14-2500 is a controlled volatility silicone system that incorporates an adhesion promoter and has a low viscosity. It can serve as a potting or embedding compound for electronic components to provide protection from extreme, radiation, humidity, mechanical and thermal stress. This product can also be used to adhere covers onto housings, or any applications where grooves require a material that has superior flow. verkürzen | |
| CV3-1142 | NuSil Silicone Technology 1 | CV3-1142 is a one-part translucent material that is also a non-slumping silicone RTV. It is best used as a sealant, caulk, adhesive or potting material in electrical and space applications that require low outgassing, and minimal volatile condensables und...weiterlesen CV3-1142 is a one-part translucent material that is also a non-slumping silicone RTV. It is best used as a sealant, caulk, adhesive or potting material in electrical and space applications that require low outgassing, and minimal volatile condensables under extreme operating conditions. This product also provides corrosion protection for sensitive circuits such as connectors, switches and other electrical components. It can also be utilized in bonding and sealing applications that require a non-slumping material. verkürzen | |
| CV4-1161-5 | NuSil Silicone Technology 1 | CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic compone...weiterlesen CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic components and is designed to withstand extreme temperature/pressure variations. verkürzen | |
| D-60 | BlueSky Chemical Co., Ltd. | D-60 is a di(1,3-propanediol)-bis(ethylacetoacetate) titanium. This product can be used to crosslink and promote adhesion in silicone sealants, adhesives, binders, and paints. Its density at 25 degrees Celsius lies between 1.05 and 1.1 g/ml. | |
| DERCOLYTE LTG | DRT (Les Derives Resiniques et Terpeniques) | DERCOLYTE LTG is produced from the polymerisation of terpenes, showing a low softening point and a low VOC content. It is recommended to platicize and to improve adhesion of pressure sensitive adhesives. | |
| Diethylaminoethyl Methacrylate (DEAEMA) | Shanghai WellTone Material Technology Co., Ltd. | Diethylaminoethyl Methacrylate (DEAEMA) is a water-soluble, chemical raw ingredient in a colorless, transparent liquid form. This product is most commonly used to increase hydrophilicity, adhesion, and thermosetting properties in coating and adhesive pro...weiterlesen Diethylaminoethyl Methacrylate (DEAEMA) is a water-soluble, chemical raw ingredient in a colorless, transparent liquid form. This product is most commonly used to increase hydrophilicity, adhesion, and thermosetting properties in coating and adhesive production applications. verkürzen | |
| DYNASYLAN® 1146 | Evonik Operations GmbH, BL Silanes | Hydrophobic Dynasylan® 1146 diaminofunctional silane is used in adhesives and sealants, and in coatings, to improve the adhesion of amino-reactive resins (e.g. RTV-silicones, two-part urethanes, silylated urethanes, MS polymers, and two-part epoxies) to i...weiterlesen Hydrophobic Dynasylan® 1146 diaminofunctional silane is used in adhesives and sealants, and in coatings, to improve the adhesion of amino-reactive resins (e.g. RTV-silicones, two-part urethanes, silylated urethanes, MS polymers, and two-part epoxies) to inorganic surfaces, plastic surfaces, and inorganic fillers. Dynasylan® 1146 silane is characterized by randomly distributed linear and cyclic oligosiloxanes and it fulfills the OECD polymer definition. Its low volatility and viscosity make compounding easy. Dynasylan® 1146 silane produces significantly less by-product (VOC) and has a correspondingly low odor level during application. verkürzen | |
| Dynasylan® 6490 | Evonik Operations GmbH, BL Silanes | Dynasylan® 6490 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and methoxy groups. Dynasylan® 6490 is a colourless, nearly odorless low-viscosity liquid. Dynasylan® 6490 is an excellent compatibiliser between inorganic fillers (e.g. ...weiterlesen Dynasylan® 6490 is a vinyl silane concentrate (oligomeric siloxane) containing vinyl and methoxy groups. Dynasylan® 6490 is a colourless, nearly odorless low-viscosity liquid. Dynasylan® 6490 is an excellent compatibiliser between inorganic fillers (e.g. kaolin, MDH, ATH) and organic polymers (e.g. EPDM, EVA, PE). The high boiling point of Dynasylan® 6490, together with its high flash point, gives it outstanding advantages with respect to safety and handling during processing. From an environmental viewpoint it should be noted that the amount of released hydrolysis methanol (VOC) is significantly reduced compared to monomeric vinyl silanes. verkürzen | |
| DYNASYLAN® AMEO-T | Evonik Operations GmbH, BL Silanes | DYNASYLAN® AMEO-T is a blend of primary and secondary aminofunctional silanes. The dual nature of the product allows it to bind chemically to both inorganic materials and organic polymers, thus acting as an adhesion promoter, a surface modifier or as a re...weiterlesen DYNASYLAN® AMEO-T is a blend of primary and secondary aminofunctional silanes. The dual nature of the product allows it to bind chemically to both inorganic materials and organic polymers, thus acting as an adhesion promoter, a surface modifier or as a reactive reagent. verkürzen | |
| Dynasylan® MEMO | Evonik Operations GmbH, BL Silanes | Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic h...weiterlesen Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons. verkürzen | |
| DYNASYLAN® SIVO 210 | Evonik Operations GmbH, BL Silanes | Dynasylan® SIVO 210 is an aminofunctional silane composition which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier or ...weiterlesen Dynasylan® SIVO 210 is an aminofunctional silane composition which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers), as a surface modifier or as chemical modification of substances. Dynasylan® SIVO 210 is a colorless to yellowish liquid with an amine-like odor which is soluble in alcohols, aliphatic or aromatic hydrocarbons. verkürzen | |
| Dynasylan® VTEO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTEO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Dynasylan® VTMO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTMO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Ethyl Acrylate | Henan Harvest Chem Co., LTD. | Ethyl Acrylate is a clear, colorless liquid with a pungent odor. This product has a molecular weight of 100.13. Ethyl Acrylate is used in the production of coatings, elastomers, adhesives, thickeners, superabsorbents, acrylic esters, and fiber sizing. | |
| GENIOSIL® GF 93 | Wacker Chemical Corporation | GENIOSIL® GF 93 is an alkoxysilane with an amino-functional group. It´s a clear, colorless liquid with a characteristic amine odor. Due to the nature of the amino group, this substance reacts as a strong base. The silane hydrolyzes autocatalytically in th...weiterlesen GENIOSIL® GF 93 is an alkoxysilane with an amino-functional group. It´s a clear, colorless liquid with a characteristic amine odor. Due to the nature of the amino group, this substance reacts as a strong base. The silane hydrolyzes autocatalytically in the presence of moisture (Ethanol is released) to form silanols, which can subsequently react with themselves to produce siloxanes or can bind to inorganic substrates. It is applied in adhesives, emulsion paint, coatings, filler treatment. verkürzen | Request Sample |
| GENIOSIL® XL 33 | Wacker Chemical Corporation | GENIOSIL® XL 33 is an alkoxysilane with a methacrylic organofunctional group. It´s a clear, colorless, light and heat sensitive liquid with a characteristically sweet odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form s...weiterlesen GENIOSIL® XL 33 is an alkoxysilane with a methacrylic organofunctional group. It´s a clear, colorless, light and heat sensitive liquid with a characteristically sweet odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. It can be applied in adhesives, emulsion paints and coatings. verkürzen | Request Sample |
| GENORAD* 40 | Rahn USA Corp. | GENORAD* 40 is a methacrylated phosphate ester. It is an additive for radically curable inks, coatings and adhesives. The efficiency and stability may be reduced when aliphatic amines are used. This product is recommended for use in printing inks and varn...weiterlesen GENORAD* 40 is a methacrylated phosphate ester. It is an additive for radically curable inks, coatings and adhesives. The efficiency and stability may be reduced when aliphatic amines are used. This product is recommended for use in printing inks and varnishes, adhesives and overprint varnishes. It improves adhesion on metal. verkürzen | Request Sample |
| GENORAD* 41 | Rahn USA Corp. | GENORAD* 41 is a methacrylated phosphate ester for radically curable inks, coatings, and adhesives. This newly-launched adhesion promoter is recommended for difficult substrates such as metal, glass and plastics. It is typically used in concentrations fro...weiterlesen GENORAD* 41 is a methacrylated phosphate ester for radically curable inks, coatings, and adhesives. This newly-launched adhesion promoter is recommended for difficult substrates such as metal, glass and plastics. It is typically used in concentrations from 1% to 5%. verkürzen | Request Sample |
| Hydrogenated Tallow Glyceride | Acme Hardesty Co. | Hydrogenated Tallow Glyceride is a light-colored solid available in flake and non-deodorized grades. It is recommended for use as an emulsifier in water-based adhesives. | |
| Licocene® PE MS 431 granules | Clariant Plastics & Coatings Ltd. | Licocene® PE MS 431 granules is a stabilized maleic anhydride grafted polyethylene wax. | |
| Licocene® PP 1302 granules | Clariant Plastics & Coatings Ltd. | Licocene® PP 1302 granules is a low melting, metallocene-technology based propylene-ethylene copolymer wax, which exhibits a low degree of crystallinity. | |
| Licocene® PP 1502 granules | Clariant Plastics & Coatings Ltd. | Licocene® PP 1502 granules is a low melting, metallocene-technology based propylene-ethylene copolymer, which exhibits a low degree of crystallinity. | |
| Licocene® PP MA 6252 granules | Clariant Plastics & Coatings Ltd. | Licocene® PP MA 6252 granules is a maleic anhydride grafted polypropylene wax. | |
| Licocene® PP MA 6452 granules | Clariant Plastics & Coatings Ltd. | Licocene® PP MA 6452 granules is a maleic anhydride grafted polypropylene wax. | |
| LT-151 | BlueSky Chemical Co., Ltd. | LT-151 is a vinyltriethoxysilane. This product can be used as a cross-linking agent and adhesion improver in alkoxy-terminated RTV-1 sealants. Its density at 20 degrees Celsius is 0.905 g/ml. |
