| Lucidene 400 | Hydrite Chemical Co. | Lucidene 400 is a highly dilutable, economic extender optimized for corrugated paper printing ink applications. | |
| Lucidene 602 | Hydrite Chemical Co. | Lucidene 602 is an emulsion that displays excellent transfer and rewetting properties. This product is well suited for use in high gloss inks and overprint varnishes. | |
| Lucidene 603 | Hydrite Chemical Co. | Lucidene 603 is a soft, film forming polymer formulated to be used as a modifier in overprint varnishes and to provide adhesion to film and foil substrates. It has good pigment wetting and viscosity stability for use in the grind stage of dry pigment disp...weiterlesen Lucidene 603 is a soft, film forming polymer formulated to be used as a modifier in overprint varnishes and to provide adhesion to film and foil substrates. It has good pigment wetting and viscosity stability for use in the grind stage of dry pigment dispersions. verkürzen | |
| Lucidene 605 NV | Hydrite Chemical Co. | Lucidene 605 NV is an emulsion that displays outstanding adhesion, water resistance, and low VOC content. This product is well suited for use in water-based inks and coatings. | |
| Lucidene 608 | Hydrite Chemical Co. | Lucidene 608 is a styrene/acrylic emulsion which can be crosslinked with Zn for increased heat resistance. This product is well suited for use in foil printing ink applications. | |
| Lucidene 645 | Hydrite Chemical Co. | Lucidene 645 is an acrylic/urethane emulsion featuring high gloss and good alkaline and detergent resistance. This product is well suited for use in water-based inks and coatings. | |
| Luminex™ 70 A | Lawter | Luminex™ 70 A is a heatset gel vehicle that displays good solubility, gloss, transfer and lithographic performance. It also has good water balance, solvent release and a sharp dot structure. The product is suitable for use in heatset offset prints. | |
| MACRYNAL® SM 2703/80BACX | Allnex | MACRYNAL® SM 2703/80BACX is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates for air-drying as well as forced drying high-solids two pack topcoats for industrial applications. | Request Sample |
| MACRYNAL® SM 2704/75BACX | Allnex | Macrynal® SM 2704/75BACX is a hydroxy functional acrylic resin designed for cross-linking with polyisocyanates. It has fast drying systems with high hardness. | Request Sample |
| MACRYNAL® SM 2727/70X | Allnex | MACRYNAL® SM 2727/70X is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It is used for air‐drying as well as forced drying high‐solids, two pack primers and topcoats for industrial applications. This product leads to fa...weiterlesen MACRYNAL® SM 2727/70X is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It is used for air‐drying as well as forced drying high‐solids, two pack primers and topcoats for industrial applications. This product leads to fast drying systems with high hardness. The principal application area is industrial coatings, in particular primers and topcoats. Such paints display a low content of volatile organic compounds (VOC). verkürzen | Request Sample |
| MACRYNAL® SM 2810/75BAC | Allnex | MACRYNAL® SM 2810/75BAC is a hydroxy functional acrylic resin designed for cross-linking with polyisocyanates. It has outstanding overall properties, such as chemical resistance, mechanical properties and outdoor stability. | Request Sample |
| MACRYNAL® SM 2855/70BAC | Allnex | Macrynal® SM 2855/70BAC is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It is a high solid binder for the formulation of fast drying, highly crosslinked two-pack polyurethane coatings providing outstanding properties ...weiterlesen Macrynal® SM 2855/70BAC is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It is a high solid binder for the formulation of fast drying, highly crosslinked two-pack polyurethane coatings providing outstanding properties in terms of chemical and solvent resistance. verkürzen | Request Sample |
| MACRYNAL® SM 2892/65XBAC | Allnex | Macrynal® SM 2892/65XBAC is a hydroxy-functional acrylic polymer and is cross-linkable with polyisocyanates. In combination with aliphatic polyisocyanates, it produces high quality, flexible two-pack clearcoats and pigmented topcoats. The cured films prov...weiterlesen Macrynal® SM 2892/65XBAC is a hydroxy-functional acrylic polymer and is cross-linkable with polyisocyanates. In combination with aliphatic polyisocyanates, it produces high quality, flexible two-pack clearcoats and pigmented topcoats. The cured films provide a good balance of flexibility and hardness, additionally, such films show superior weathering stability. verkürzen | Request Sample |
| MACRYNAL® SM 500/60X | Allnex | MACRYNAL® SM 500/60X is a hydroxy functional acrylic resin, cross-linkable with polyisocyanates with high gloss, good mechanical properties and good adhesion to metals and plastic substrates. | Request Sample |
| MACRYNAL® SM 510/60LG | Allnex | Macrynal® SM 510/60LG is a hydroxy functional acrylic resin, cross-linkable with polyisocyanates with high gloss, very good mechanical properties, and excellent outdoor stability and chemical resistance. | Request Sample |
| MACRYNAL® SM 510n/60LG | Allnex | Macrynal® SM 510N/60LG is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. | Request Sample |
| MACRYNAL® SM 510n/65BACX | Allnex | Macrynal® SM 510N/65BACX is a hydroxy functional acrylic resin designed for cross-linking with polyisocyanates. It has high gloss, excellent mechanical properties, and superior outdoor durability and chemical resistance. | Request Sample |
| MACRYNAL® SM 512/65BACX | Allnex | Macrynal® SM 512/65BACX is a hydroxy functional acrylic resin, designed for crosslinking with polyisocyanates for varnishes for industrial use. The good compatibility with Tolonate HDB and Desmodur N allows the production of fast drying primers and top co...weiterlesen Macrynal® SM 512/65BACX is a hydroxy functional acrylic resin, designed for crosslinking with polyisocyanates for varnishes for industrial use. The good compatibility with Tolonate HDB and Desmodur N allows the production of fast drying primers and top coats for spray applications. verkürzen | Request Sample |
| MACRYNAL® SM 513/60LG | Allnex | Macrynal® SM 513/60LG is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It has excellent mechanical properties and chemical resistance, and high gloss. It is used in fast drying two pack systems, in paricular for primer...weiterlesen Macrynal® SM 513/60LG is a hydroxy functional acrylic resin designed for crosslinking with polyisocyanates. It has excellent mechanical properties and chemical resistance, and high gloss. It is used in fast drying two pack systems, in paricular for primer surfacers for car repairs and for general industrial applications. verkürzen | Request Sample |
| MACRYNAL® SM 515/70BAC | Allnex | Macrynal® SM 515/70BAC is a hydroxyl functional acrylic resin crosslinkable with polyisocyanates and when in combination with aliphatic polyisocyanates, it is suggested for air-drying and force air drying two pack high-solids systems for automotive OEM an...weiterlesen Macrynal® SM 515/70BAC is a hydroxyl functional acrylic resin crosslinkable with polyisocyanates and when in combination with aliphatic polyisocyanates, it is suggested for air-drying and force air drying two pack high-solids systems for automotive OEM and refinish coatings. verkürzen | Request Sample |
| MACRYNAL® SM 516/70BAC | Allnex | Macrynal® SM 516/70BAC is an acrylic resin containing hydroxyl groups for crosslinking with polyisocyanates or melamines. It is used in air-drying and forced drying two pack medium high solids systems with high gloss. It has excellent mechanical propertie...weiterlesen Macrynal® SM 516/70BAC is an acrylic resin containing hydroxyl groups for crosslinking with polyisocyanates or melamines. It is used in air-drying and forced drying two pack medium high solids systems with high gloss. It has excellent mechanical properties, excellent chemical resistance and good outdoor stability for automotive refinishes. verkürzen | Request Sample |
| MACRYNAL® SM 540/60X | Allnex | Macrynal® SM 540/60X is a hydroxy functional acrylic resin, cross-linkable with polyisocyanates with high gloss, excellent mechanical properties and superior adhesion to metals and non-iron metals. | Request Sample |
| MACRYNAL® SM 548/50X | Allnex | Macrynal® SM 548/50X is a hydroxyl functional acrylic resin, cross-linkable with polyisocyanates for fast drying two-pack industrial lacquers. | Request Sample |
| MACRYNAL® SM 565/70BAC | Allnex | Macrynal® SM 565/70BAC is a hydroxy-functional acrylic resin; cross-linkable with polyisocyanates for the production of high solids lacquers. | Request Sample |
| MACRYNAL® SM 6810w/42WA | Allnex | Macrynal® SM 6810W/42WA is an aqueous, hydroxy functional acrylic resin. It is in combination with water-emulsifiable polyisocyanates for high quality 2-pack-topcoats with excellent applicability and appearance. | Request Sample |
| MACRYNAL® SM 6817w/44WA | Allnex | Macrynal® SM 6817w/44WA is an aqueous hydroxy functional acrylic resin. It is used in combination with water-emulsifiable poly-isocyanates for fast drying waterborne 2-pack-topcoats with very good applicability and appearance. This product has low isocyan...weiterlesen Macrynal® SM 6817w/44WA is an aqueous hydroxy functional acrylic resin. It is used in combination with water-emulsifiable poly-isocyanates for fast drying waterborne 2-pack-topcoats with very good applicability and appearance. This product has low isocyanate consumption due to its low hydroxyl value. verkürzen | Request Sample |
| MACRYNAL® SM 6826w/43WA | Allnex | Macrynal® SM 6826w/43WA is a waterborne, hydroxy functional polyacrylate dispersion. It is highly suitable for the formulation of top quality 2-pack polyurethane coatings, in particular primer surfacers/fillers as well as matte top- and clear coats, when ...weiterlesen Macrynal® SM 6826w/43WA is a waterborne, hydroxy functional polyacrylate dispersion. It is highly suitable for the formulation of top quality 2-pack polyurethane coatings, in particular primer surfacers/fillers as well as matte top- and clear coats, when used in combination with water-emulsifiable polyisocyanates. verkürzen | Request Sample |
| MACRYNAL® SM 685/55BAC | Allnex | Macrynal® SM 685/55BAC is a hydroxy functional acrylic resin for polyurethane primers, primer surfacers, furniture and industrial coatings, and cross-linkable with polyisocyanates. | Request Sample |
| MACRYNAL® VSM 1509/60LG | Allnex | Macrynal® VSM 1509/60LG is a hydroxy functional acrylic resin; cross-linkable with polyisocyanates. It produces very fast drying two pack coatings for the industrial lacquer sector, and has good balance between elasticity and film hardness. | Request Sample |
| MACRYNAL® VSM 2155/60EPAC | Allnex | Macrynal® VSM 2155/60EPAC is a hydroxy functional acrylic resin; cross-linkable with polyisocyanates for the production of coatings with extraordinary high chemical resistance. | Request Sample |
| MACRYNAL® VSM 2521w/42WAB | Allnex | Macrynal® VSM 2521W/42WAB is a reactive waterborne acrylic resin containing hydroxyl groups for use in high quality clear and pigmented topcoats for two component air drying and baking systems. | Request Sample |
| MACRYNAL® VSM 2570/70BAC | Allnex | Macrynal® VSM 2570/70BAC is a hydroxyl functional acrylic resin, cross-linkable with polyisocyanates for high solids varnishes. | Request Sample |
| MACRYNAL® VSM 2701/65SNA | Allnex | Macrynal® VSM 2701/65SNA is a hydroxyl functional acrylic resin; crosslinkable with polyisocyanates that produces fast drying two-pack coatings with long potlife for the industrial lacquer sector. | Request Sample |
| MACRYNAL® VSM 2705/70LG | Allnex | Macrynal® VSM 2705/70LG is a hydroxy functional acrylic resin, cross-linkable with polyisocyanates for the production of high solids lacquers. | Request Sample |
| MACRYNAL® VSM 2706/60X | Allnex | Macrynal® VSM 2706/60X is a hydroxy functional acrylic resin; cross-linkable with polyisocyanates. It is used as fast drying two pack coatings for the industrial lacquer sector. | Request Sample |
| MACRYNAL® VSM 2760/50BAC | Allnex | Macrynal® VSM 2760/50BAC is a hydroxy functional acrylic resin, cross-linkable with polyisocyanates. It has high elasticity, very good chemical resistance, is non-yellowing, and has good drying properties. | Request Sample |
| MACRYNAL® VSM 2800/70BAC | Allnex | Macrynal® VSM 2800/70BAC is a hydroxy-functional acrylic resin, cross-linkable with polyisocyanates for the production of high solids lacquers. | Request Sample |
| MACRYNAL® VSM 2805/80BAC | Allnex | Macrynal® VSM 2805/80BAC is a hydroxyfunctional, modified acrylic resin; cross-linkable with polyisocyanates for the production of ultra high solids lacquers. | Request Sample |
| MACRYNAL® VSM 6299w/42WA | Allnex | Macrynal® VSM 6299W/42WA is an aqueous, hydroxy functional acrylic resin. It is used in combination with water-emulsifiable polyisocyanates for high quality 2-pack-topcoats with excellent development of hardness at room temperature drying and very good gl...weiterlesen Macrynal® VSM 6299W/42WA is an aqueous, hydroxy functional acrylic resin. It is used in combination with water-emulsifiable polyisocyanates for high quality 2-pack-topcoats with excellent development of hardness at room temperature drying and very good gloss. verkürzen | Request Sample |
| Maleic Anhydride | LUKEM D.O.O. | Maleic Anhydride appears as either white brickets or in a molten state and is a clear or slightly opalescent solution in o-Xylene. This product is used as a raw material in coatings and synthetic resins. | |
| MALEIC MODIFIED GLYCEROL ESTER OF GUM ROSIN 130 (PM-004) | PT. NASCO | MALEIC MODIFIED GLYCEROL ESTER OF GUM ROSIN 130 is an oil soluble resin that is a glycerol ester of Gum Rosin modified using Maleic Anhydride. It is a hard thermoplastic resin that offers excellent solubility, good solvent evaporation, and low viscosity i...weiterlesen MALEIC MODIFIED GLYCEROL ESTER OF GUM ROSIN 130 is an oil soluble resin that is a glycerol ester of Gum Rosin modified using Maleic Anhydride. It is a hard thermoplastic resin that offers excellent solubility, good solvent evaporation, and low viscosity in solutions used in formulating Nitrocellulose based formulations. It exhibits good hardness, high gloss and vest fest drying speed. verkürzen | |
| Mapol 50-100 | Polidur San Luis | Mapol 50-100 is a rosin modified maleic resin at 100% of solids. This product presents improved gloss and sandability in nitrocellulosic lacquers, improved enamel´s gloss and hard dry and excellent copatibility with nitrocellulosic resins. It has applicat...weiterlesen Mapol 50-100 is a rosin modified maleic resin at 100% of solids. This product presents improved gloss and sandability in nitrocellulosic lacquers, improved enamel´s gloss and hard dry and excellent copatibility with nitrocellulosic resins. It has applications in nitrocellulose sealers and lacquers for wood, oleoresin varnishes and as a gloss and dry enamel modifier. verkürzen | |
| MCEVA | Suny Chem | MCEVA (Modified Chlorinated EVA) is mainly used with MCPP to make gravure plastic lamination ink and adhesive. This product is used to produce wear resistant, heavy corrosion resistant and self extinguishing coatings, high class adhesives, high quality pr...weiterlesen MCEVA (Modified Chlorinated EVA) is mainly used with MCPP to make gravure plastic lamination ink and adhesive. This product is used to produce wear resistant, heavy corrosion resistant and self extinguishing coatings, high class adhesives, high quality printing ink and plasticizer of PVC films. It is widely used in ship coating, road marking paint, swimming pool paint, chemical equipment and decoration paint for wood and cement. MCEVA can improve the adhesive property of paint for plastic film, and can also be used to produce tube, insulation cables, wires and shoes. verkürzen | |
| Melapol 1010-60 B | Polidur San Luis | Melapol 1010-60 B is a butylated melamine-formaldehyde resin at 60% in xilol-isobutanol. This product provides medium reactivity, good final hardness in stoving enamels and good compatibility with alkyd resins. It is for use in stoving enamels with short,...weiterlesen Melapol 1010-60 B is a butylated melamine-formaldehyde resin at 60% in xilol-isobutanol. This product provides medium reactivity, good final hardness in stoving enamels and good compatibility with alkyd resins. It is for use in stoving enamels with short, medium and long oil alkyds and stoving enamels with epoxy esters. verkürzen | |
| Melapol 1040-60 B | Polidur San Luis | Melapol 1040-60 B is a butylated melamine-formaldehyde resin at 60% in butanol. This product provides high reactivity, excellent gloss and nivelation in stoving enamels and good compatibility with hydroxylated acrylic resins. It is for use in stoving enam...weiterlesen Melapol 1040-60 B is a butylated melamine-formaldehyde resin at 60% in butanol. This product provides high reactivity, excellent gloss and nivelation in stoving enamels and good compatibility with hydroxylated acrylic resins. It is for use in stoving enamels combined with short, medium and long oil alkyds and stoving enamels combined with acrylic resins and epoxy esters. verkürzen | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...weiterlesen Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. verkürzen | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...weiterlesen Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. verkürzen | |
| Miradull™ 7060 A | Lawter | Miradull™ 7060 A is a dull sheet-fed overprint varnish that shows a dull and gloss contrast of the printed materials. It has good drying properties and withstands burnishing. The product also displays resistance to piling, good transfer, a light color and...weiterlesen Miradull™ 7060 A is a dull sheet-fed overprint varnish that shows a dull and gloss contrast of the printed materials. It has good drying properties and withstands burnishing. The product also displays resistance to piling, good transfer, a light color and is considered ideal for use in overprints. verkürzen | |
| Miradull™ 8689 A | Lawter | Miradull™ 8689 A is an ultra dull sheet-fed overprint varnish that offers premium performance in terms of offset lithography. The dull finish makes it resistant to polishing with good yellowing characteristics. The wax and drier content allows for skinnin...weiterlesen Miradull™ 8689 A is an ultra dull sheet-fed overprint varnish that offers premium performance in terms of offset lithography. The dull finish makes it resistant to polishing with good yellowing characteristics. The wax and drier content allows for skinning in the can. Other benefits include the highest degree of matte finish, good transparency and hard drying. Miradull™ 8689 A is suitable for use in overprints. verkürzen | |
| Miraglaze™ 7017 A | Lawter | Miraglaze™ 7017 A is a high gloss, heatset overprint varnish made to be resistant to yellowing upon aging and oxidation. The oil, solvents and balanced resin that make up the varnish, allow for fast print runs at lower oven temperatures. The product has a...weiterlesen Miraglaze™ 7017 A is a high gloss, heatset overprint varnish made to be resistant to yellowing upon aging and oxidation. The oil, solvents and balanced resin that make up the varnish, allow for fast print runs at lower oven temperatures. The product has a wax combination that produces prints with optimum slip and rub resistance, making it suitable for use in overprints, particularly heatset applications. verkürzen | |
| Miraglaze™ 8600 A | Lawter | Miraglaze™ 8600 A is an overprint base that has no driers or wax, ensuring that ink makers have control over the addition and concentration of waxes, solvents and driers, adjusting for tack and flow as necessary. Overprints are lighter in color and drier ...weiterlesen Miraglaze™ 8600 A is an overprint base that has no driers or wax, ensuring that ink makers have control over the addition and concentration of waxes, solvents and driers, adjusting for tack and flow as necessary. Overprints are lighter in color and drier efficiency will be increased if the ink maker adds driers at room temperature. Wax efficiency will also be enhanced resulting in lower concentrations of wax to obtain the same rub resistance, while leading to higher gloss. verkürzen | |
| MODAFLOW® NSR 100 | Allnex | MODAFLOW® NSR 100 is a solvent based dispersion of modified nanosilica for improving scratch resistance. | Request Sample |
| MR-422 | LUKEM D.O.O. | MR-422 is a gum rosin modified maleic resin. The product has a stable color and exhibits good heat resistance and adhesion. With a softening point between 125ºC and 135ºC, MR-422 is intended for use in paints and inks. | |
| MR-424 | LUKEM D.O.O. | MR-424 is a gum rosin modified maleic resin. The product has a stable color and exhibits good heat resistance and adhesion. With a softening point between 120ºC and 130ºC, MR-424 is intended for use in paints, inks, and adhesives. | |
| MYCOAT® 779 | Allnex | MYCOAT® 779 resin is a new type of methoxy methyl melamineformaldehyde resin with a high imino group and high monomeric content, which does not require strong acid catalyst for fast cure response. MYCOAT 779 resin can expect sharply curing in comparison w...weiterlesen MYCOAT® 779 resin is a new type of methoxy methyl melamineformaldehyde resin with a high imino group and high monomeric content, which does not require strong acid catalyst for fast cure response. MYCOAT 779 resin can expect sharply curing in comparison with others same type. MYCOAT 779 resin can also be used in the preparation of a wide range of general industrial finishes. verkürzen | Request Sample |
| NANOCRYL® C 130 | Evonik Operations GmbH, BL Coating Additives | NANOCRYL® C 130 is a clear to slightly yellow liquid, 50 wt.-% silica nanoparticles in cyclic trimethylolpropane formal acrylate. It is used for solventborne and solvent-free radiation-curing formulations. It has good flexibility and is applied in overpri...weiterlesen NANOCRYL® C 130 is a clear to slightly yellow liquid, 50 wt.-% silica nanoparticles in cyclic trimethylolpropane formal acrylate. It is used for solventborne and solvent-free radiation-curing formulations. It has good flexibility and is applied in overprint varnishes and plastic top coats. This product has an enhanced scratch and abrasion resistance with no decrease of transparency. It has great adhesion on aluminum/glass, reduced cure shrinkage, and barrier effect. It also has adhesion on plastic, an anti-settling effect of filled formulations, and improved dirt shedding. verkürzen | Request Sample |
| NANOCRYL® C 140 | Evonik Operations GmbH, BL Coating Additives | NANOCRYL® C 140 is a clear to slightly yellow liquid, 50 pbw silica nanoparticles in hexanedioldiacrylate. It has good UV-resistance, high flexibility, and is used for solventborne and solvent-free radiation-curing formulations. It also applied in overpri...weiterlesen NANOCRYL® C 140 is a clear to slightly yellow liquid, 50 pbw silica nanoparticles in hexanedioldiacrylate. It has good UV-resistance, high flexibility, and is used for solventborne and solvent-free radiation-curing formulations. It also applied in overprint varnishes and plastic top coats. This product has enhanced scratch and abrasion resistance with no decrease of transparency. It has good adhesion on aluminum/glass, reduced cure shrinkage, and barrier effect. It also has improved dirt shedding. verkürzen | Request Sample |
| NANOCRYL® C 150 | Evonik Operations GmbH, BL Coating Additives | NANOCRYL® C 150 is a clear to slightly yellow liquid, 50 wt.-% silica nanoparticles in trimethylolpropanetriacrylate (TMPTA) that is used for solventborne and solvent-free radiation-curing formulations. It has high surface hardness and high crosslinking d...weiterlesen NANOCRYL® C 150 is a clear to slightly yellow liquid, 50 wt.-% silica nanoparticles in trimethylolpropanetriacrylate (TMPTA) that is used for solventborne and solvent-free radiation-curing formulations. It has high surface hardness and high crosslinking density in overprint varnishes and plastic top coats. It has excellent enhanced scratch and abrasion resistance with no decrease of transparency. It has great adhesion on aluminum/glass, reduced cure shrinkage, and a barrier effect. It also has improved dirt shedding and adhesion on plastic. verkürzen | Request Sample |
| Noneno | Braskem S.A. | Noneno is a clear hydrocarbon liquid. | |
| NQ COTTON | Companhia Nitro Quimica Brasileira | NQ COTTON is a line of products which encompasses all industrial nitrocellulose grades in the cotton form. They vary in viscosity, degree of nitration and wetting agent. In the NQ COTTON line, customers find products covering different specifications for ...weiterlesen NQ COTTON is a line of products which encompasses all industrial nitrocellulose grades in the cotton form. They vary in viscosity, degree of nitration and wetting agent. In the NQ COTTON line, customers find products covering different specifications for the various nitrocellulose applications, such as the printing ink, nail polish, automotive refinish and wood coatings, pharmaceutical and many other industries. We make it our business to develop them according to the properties required in each of these segments, allowing our customers to formulate paints and coatings with outstanding technical properties, such as fast drying, film formation, gloss, and compatibility with many resins. verkürzen | |
| NQ SOLVE | Companhia Nitro Quimica Brasileira | NQ SOLVE is a line of products designed to allows our customers to achieve productivity improvements in the process of dissolving nitrocellulose in the cotton format. By choosing the NQ SOLVE line, our customers have access to customized solutions and can...weiterlesen NQ SOLVE is a line of products designed to allows our customers to achieve productivity improvements in the process of dissolving nitrocellulose in the cotton format. By choosing the NQ SOLVE line, our customers have access to customized solutions and can promptly formulate clear and pigmented basecoats. The NQ SOLVE line consists of solutions derived from our nitrocellulose portfolio with several options in solvents, such as ethyl acetate, butyl acetate, methyl ethyl ketone, xylene and acetone, among others. The solutions can be formulated according to customer-specific requirements in all applications where the nitrocellulose is used. verkürzen | |
| NQ SYSTEM | Companhia Nitro Quimica Brasileira | NQ SYSTEM is a line of products designed to optimize the productivity in paint and varnish manufacturing processes, as it incorporates plasticizers into nitrocellulose solutions, providing to our customers access to semifinished systems. In this line, cus...weiterlesen NQ SYSTEM is a line of products designed to optimize the productivity in paint and varnish manufacturing processes, as it incorporates plasticizers into nitrocellulose solutions, providing to our customers access to semifinished systems. In this line, customers will also find a wide variety of products tailored to the characteristics and applications of their industry segments. The use of plasticizers imparts greater elasticity to nitrocellulose, while improving the adhesion of paints and coatings to the substrates to which they are applied. verkürzen | |
| NQ SYSTEM+ | Companhia Nitro Quimica Brasileira | NQ SYSTEM+ is a line of products which offers systems containing nitrocellulose for formulating paints and varnishes. This high performance product line delivers excellent improvements in productivity and competitiveness, as it consists of semifinished pr...weiterlesen NQ SYSTEM+ is a line of products which offers systems containing nitrocellulose for formulating paints and varnishes. This high performance product line delivers excellent improvements in productivity and competitiveness, as it consists of semifinished products comprising nitrocellulose, solvents, plasticizers and complementary resins. It is an outstanding offering as it allows our customers the elimination of several individual solubilization and mixing processes, thereby granting significant performance improvements. verkürzen | |
| Olgamid 2115-80 X | Polidur San Luis | Olgamid 2115-80 X is a reactive polyamidoamine at 80% in xilol. This product presents excellent reactivity with epoxy resins and Good mixture (Pot Life). It has applications in curing agent for solid and liquid epoxy resins, epoxy enamels and primers for ...weiterlesen Olgamid 2115-80 X is a reactive polyamidoamine at 80% in xilol. This product presents excellent reactivity with epoxy resins and Good mixture (Pot Life). It has applications in curing agent for solid and liquid epoxy resins, epoxy enamels and primers for maintenance, two component epoxy adhesives and epoxy concrete sealers. verkürzen | |
| Opalion 2010 | Opalion | Opalion 2010 is a dispersion of very high crosslinking copolymers of esters, acrylic and vinyl. It is used as a binder for printing and resinated fabric, providing a soft hand and excellent wash resistance. | |
| Opalion Binder I | Opalion | Opalion Binder I is a micro acrylic polymer and impregnating resin. It is for use as an impregnation for leather flower that gives an excellent break and good interior filling. It reaches the same leather fibers and can be used for natural finishes. | |
| Optilith™ 3 A | Lawter | Optilith™ 3 A is a water-fighting additive with a free-flowing resinated solution that provides easy dispersal and pumping. It decreases water pick-up in lithographic inks and is functional in a variety of fountain solutions. Optilith™ 3 A is suitable for...weiterlesen Optilith™ 3 A is a water-fighting additive with a free-flowing resinated solution that provides easy dispersal and pumping. It decreases water pick-up in lithographic inks and is functional in a variety of fountain solutions. Optilith™ 3 A is suitable for use in heatset and sheet-fed offset inks and in flushing vehicles. verkürzen | |
| Optirub™ OP A | Lawter | Optirub™ OP A is a micronized, oxidized polyethylene that can disperse easily into aqueous systems and is formulated to give good lubricity, gloss, rub resistant and anti-blocking properties. Other benefits include rapid dispersion into aqueous systems an...weiterlesen Optirub™ OP A is a micronized, oxidized polyethylene that can disperse easily into aqueous systems and is formulated to give good lubricity, gloss, rub resistant and anti-blocking properties. Other benefits include rapid dispersion into aqueous systems and the elimination of wax flotation and defoamer interactions. Optirub™ OP A is used in flexographic and packaging gravure inks as well as publication gravure inks and aqueous overprint varnishes. verkürzen | |
| Optirub™ PC A | Lawter | Optirub™ PC A is a polyethylene and carnauba wax that is finely micronized and recommended for applications in which clarity, gloss and inter-coat adhesion are crucial. It provides good slip, wet scuff and block and mar resistance properties. Optirub™ PC ...weiterlesen Optirub™ PC A is a polyethylene and carnauba wax that is finely micronized and recommended for applications in which clarity, gloss and inter-coat adhesion are crucial. It provides good slip, wet scuff and block and mar resistance properties. Optirub™ PC A is suitable for use in flexographic and gravure inks, in heatset and sheet-fed inks and in UV metal deco inks. verkürzen | |
| Optirub™ SP1 A | Lawter | Optirub™ SP1 A is a blend of polyethylene and PTFE wax formulated to produce a high degree of rub resistance and surface lubricity in coatings and inks. Other benefits of the wax blend include performance efficiency, formulation flexibility and a single c...weiterlesen Optirub™ SP1 A is a blend of polyethylene and PTFE wax formulated to produce a high degree of rub resistance and surface lubricity in coatings and inks. Other benefits of the wax blend include performance efficiency, formulation flexibility and a single component system. OptiruB™ SP1 A is used in flexographic and gravure inks and in heatset, sheet-fed, UV and metal decorating inks. verkürzen | |
| OTA 480 | Allnex | OTA-480 is a triacrylated reactive diluent based on a glycerol derivative. It exhibits low viscosity and good flexibility for a triacrylate and its high functionality contributes to good reactivity and hardness. | Request Sample |
| P-Phenylenediamine (PPD) | Hainan Zhongxin Chemical Co., Ltd. | P-Phenylenediamine (PPD) can be either a white powder, flake or lump with a molecular formula of C6H8N2 and is between 99.5 - 99.9% pure. It is primarily used as a component of engineering polymers and aramid fibers. P-Phenylenediamine (PPD) can also be u...weiterlesen P-Phenylenediamine (PPD) can be either a white powder, flake or lump with a molecular formula of C6H8N2 and is between 99.5 - 99.9% pure. It is primarily used as a component of engineering polymers and aramid fibers. P-Phenylenediamine (PPD) can also be used in the production of hair dyes, rubber chemicals, textile dyes, pigments, and photographic developing chemicals. verkürzen | |
| Pentaerythritol | Hainan Zhongxin Chemical Co., Ltd. | Pentaerythritol is synonymous with 2,2-Bis(hydroxymethyl) 1,3-propanediol;Tetrakis(hydroxymethyl)methane and contains 95% Monopentaerythritol. It is primarily used as an additive for short, medium and long oil alkyd resins for the production of inks and p...weiterlesen Pentaerythritol is synonymous with 2,2-Bis(hydroxymethyl) 1,3-propanediol;Tetrakis(hydroxymethyl)methane and contains 95% Monopentaerythritol. It is primarily used as an additive for short, medium and long oil alkyd resins for the production of inks and paints. verkürzen | |
| PENTAERYTHRITOL ESTER OF GUM ROSIN 100 (PM-005) | PT. NASCO | PENTAERYTHRITOL ESTER OF GUM ROSIN 100 is a high softening point thermoplastic resin made of Gum Rosin and Pentaerythritol. It is soluble in aromatic solvents, aliphatic hydrocarbon solvents, esters, ketones, and chlorinated solvents, however, it is insol...weiterlesen PENTAERYTHRITOL ESTER OF GUM ROSIN 100 is a high softening point thermoplastic resin made of Gum Rosin and Pentaerythritol. It is soluble in aromatic solvents, aliphatic hydrocarbon solvents, esters, ketones, and chlorinated solvents, however, it is insoluble in methanol, ethanol, isopropanol, and water. It is well suited for the adhesive industry due to is weak odor, excellent heat stability and great adhesion properties and also it’s compatibility with many kinds of polymers. verkürzen | |
| PEO-1 | Sumitomo Seika Chemicals Co., Ltd. | PEO-1 is a nonionic water-soluble thermoplastic polymer. PEO-1 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-2 | Sumitomo Seika Chemicals Co., Ltd. | PEO-2 is a nonionic water-soluble thermoplastic polymer. PEO-2 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-3 | Sumitomo Seika Chemicals Co., Ltd. | PEO-3 is a nonionic water-soluble thermoplastic polymer. PEO-3 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-4 | Sumitomo Seika Chemicals Co., Ltd. | PEO-4 is a nonionic water-soluble thermoplastic polymer. PEO-4 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-8 | Sumitomo Seika Chemicals Co., Ltd. | PEO-8 is a nonionic water-soluble thermoplastic polymer. PEO-8 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PETIA | Allnex | PETIA (Pentaerythritol triacrylate) is a multifunctional monomer containing a mixture of tri- and tetra-acrylates with a high degree of acrylic unsaturation. PETIA can be utilized in a variety of UV curable coatings and ink systems and coatings where a hi...weiterlesen PETIA (Pentaerythritol triacrylate) is a multifunctional monomer containing a mixture of tri- and tetra-acrylates with a high degree of acrylic unsaturation. PETIA can be utilized in a variety of UV curable coatings and ink systems and coatings where a high degree of crosslinking is requested. PETIA polymerizes when exposed to sources of free radicals. verkürzen | Request Sample |
| PETRA | Allnex | PETRA (Pentaerythritol acrylate) is a multifunctional reactive diluent with a high degree of acrylic unsaturation and finds use in a variety of ultraviolet light (UV) and electron beam (EB) curable coatings and ink systems where a high degree of crosslink...weiterlesen PETRA (Pentaerythritol acrylate) is a multifunctional reactive diluent with a high degree of acrylic unsaturation and finds use in a variety of ultraviolet light (UV) and electron beam (EB) curable coatings and ink systems where a high degree of crosslinking is desired. PETRA is a mixture of predominantly the tri- and tetra-acrylate esters of pentaerythritol. verkürzen | Request Sample |
| Petroleum Resin (C9 series) | Hainan Zhongxin Chemical Co., Ltd. | Petroleum Resin (C9 series) is a light yellow granular petroleum hydrocarbon resin for use in making road-marking paints. It also has applications as an additive in the production of rubber and printing inks for similar industries. | |
| PHENODUR® EP 560 | Allnex | PHENODUR® EP 560 is used as a crosslinker for epoxy, hydroxyl, carboxyl and amide functional vehicles to produce baked films with excellent chemical resistance, corrosion protection and adhesion. | Request Sample |
| PHENODUR® PR 217/65B | Allnex | PHENODUR® PR 217/65B is a curable phenolic resin. It is suitable for the interior coating of containers employed for packaging in the food and luxury commodity industries. | Request Sample |
| PHENODUR® PR 263/70B | Allnex | PHENODUR® PR 263/70B is a curable phenolic resin developed as a binder for shop- and washprimers. It has excellent pigment wetting properties. | Request Sample |
| PHENODUR® PR 285/55IB/B | Allnex | PHENODUR® PR 285/55IB/B is a curable unplasticized phenolic resin. It is used for coating the interior and exterior surfaces of packaging containers and cans; as high-adhesion, chemically resistant protective coatings for apparatus vessels, pipelines, etc...weiterlesen PHENODUR® PR 285/55IB/B is a curable unplasticized phenolic resin. It is used for coating the interior and exterior surfaces of packaging containers and cans; as high-adhesion, chemically resistant protective coatings for apparatus vessels, pipelines, etc.; for heat-curing phenolic/epoxide resin combinations. verkürzen | Request Sample |
| Phenodur® PR 307/63X/MP | Allnex | Phenodur® PR 307/63X/MP is used for tinting/coloring resins to adjust gold shade of the cured coating films. | Request Sample |
| PHENODUR® PR 308/62MP | Allnex | PHENODUR® PR 308/62MP is a curable, unplasticized phenolic resin. It is used as a coloring resin for gold lacquers and solvent-borne systems. | Request Sample |
| PHENODUR® PR 309 /63 B/MP | Allnex | PHENODUR® PR 309 /63 B/MP is a tinting/coloring resins to adjust gold shade of the cured coating films. Very dark as form of delivery. PR 309 is the newest coloring agent development of Allnex and is not based on natural resin, extracted of pinewood stumps...weiterlesen PHENODUR® PR 309 /63 B/MP is a tinting/coloring resins to adjust gold shade of the cured coating films. Very dark as form of delivery. PR 309 is the newest coloring agent development of Allnex and is not based on natural resin, extracted of pinewood stumps. verkürzen | Request Sample |
| PHENODUR® PR 371/70B | Allnex | PHENODUR® PR 371/70B is a straight phenol based type of very high chemical resistance and limited flexibility. For can coatings including BADGE- and BPA-NI formulas and interior drum linings. Low free formaldehyde version available. | Request Sample |
| PHENODUR® PR 371/70B LF | Allnex | PHENODUR® PR 371/70B LF is a straight phenol based type of very high chemical resistance and limited flexibility. For can coatings including BADGE- and BPA-NI formulas and interior drum linings. Low free formaldehyde version. | Request Sample |
| PHENODUR® PR 401/72B | Allnex | PHENODUR® PR 401 72% B is a curable unplasticized phenolic resin. It is recommended for coating the interior and exterior surfaces of packaging containers and cans; as high adhesion, chemically resistant protective coatings for apparatus, vessels, pipelin...weiterlesen PHENODUR® PR 401 72% B is a curable unplasticized phenolic resin. It is recommended for coating the interior and exterior surfaces of packaging containers and cans; as high adhesion, chemically resistant protective coatings for apparatus, vessels, pipelines, etc.; for heatcuring phenolic/epoxide resin combinations; for heatcuring phenolic/polyvinylbutyral combinations and for physically drying paints with resistance to fuel and oil. verkürzen | Request Sample |
| PHENODUR® PR 405 /72B | Allnex | PHENODUR® PR 405/72B is a tailor-sized phenolic resin for electronic application. | Request Sample |
| PHENODUR® PR 411/75B | Allnex | PHENODUR® PR 411/75B is a heat curable phenolic resin for the coating of interior and exterior surfaces of packaging containers and cans; as high adhesion, chemically resistant protective coatings for apparatus, vessels, pipelines. | Request Sample |
| PHENODUR® PR 515/60LG | Allnex | PHENODUR® PR 515/60LG is a curable, unplasticized phenolic resin. It has excellent adhesion, hardness and flexibility. It also has very good resistance against chemicals, mineral oils and food for the interior coating of metal packaging goods. | Request Sample |
| PHENODUR® PR 517/60B | Allnex | PHENODUR® PR 517 is a curable phenolic resin. Good flexibility and high sulphur resistance with EPOXY- and PE resins. Low free formaldehyde of < 0,5%. | Request Sample |
| PHENODUR® PR 520/65B | Allnex | PHENODUR® PR 520 is a curable, unplasticized phenolic resin. Type PHENODUR® PR 516, higher solid (less VOC) and less migration, curing speed slightly lower vs. original type PHENODUR® PR 516. Intended to be used for BADGE- and BPA-NI application. | Request Sample |
| PHENODUR® PR 521/60B | Allnex | PHENODUR® PR 521 is a heat curing, unplasticized phenolic resin. Higher reactive version of PHENODUR® PR 516, for BADGE- and BPA-NI usage. | Request Sample |
| PHENODUR® PR 566/65BX | Allnex | PHENODUR® PR 566 is a Bisphenol A - free, heat-curing, non-plasticized phenolic resin. It is used in heat curable phenolic/polyester resin combinations (BADGE & BPA-NI lacquers) as well as phenolic/epoxy resin systems for the interior and exterior layer o...weiterlesen PHENODUR® PR 566 is a Bisphenol A - free, heat-curing, non-plasticized phenolic resin. It is used in heat curable phenolic/polyester resin combinations (BADGE & BPA-NI lacquers) as well as phenolic/epoxy resin systems for the interior and exterior layer of metal containers with high adhesion, excellent flexibility and good chemical resistance. verkürzen | Request Sample |
| PHENODUR® PR 612/80B | Allnex | PHENODUR® PR 612/80B is a curable phenolic resin. It is used in heat-curable phenolic/epoxide resin combinations, high-adhesion, chemically resistant protective coatings for apparatus, vessels and pipelines. PHENODUR® PR 612 also for wire insulation varni...weiterlesen PHENODUR® PR 612/80B is a curable phenolic resin. It is used in heat-curable phenolic/epoxide resin combinations, high-adhesion, chemically resistant protective coatings for apparatus, vessels and pipelines. PHENODUR® PR 612 also for wire insulation varnishes. verkürzen | Request Sample |
