| BYD6009 | Tianyi Chemical Engineering Material Co., Ltd. | BYD6009, in the form of a liquid emulsion, is a waterborne UV-curing resin that can be used in wood primers and inks. This product has a rapid cure and it attaches to layers well. It is non toxic and the end product will have a high gloss. | |
| IDROBEN 2643 | Benasedo | IDROBEN 2643 is a self crosslinking, Water-dilutable Epoxy Resin Acrylic modified. It can also be combined with esametoxymelamine resins in the ratio 85/15 or 70/30 based on solid contents. | |
| Crestakyd® 10-1019 | Scott Bader | Crestakyd® 10-1019 is a top quality gloss paints for both decorative and marine applications. | |
| Crestakyd® 10-1022 | Scott Bader | Crestakyd® 10-1022 is a standard top quality alkyd for use in decorative gloss paints. | |
| Crestakyd® 10-2020 | Scott Bader | Crestakyd® 10-2020 is a standard long oil alkyd for use in decorative gloss paints. | |
| Crestakyd® 10-2033 | Scott Bader | Crestakyd® 10-2033 is a fast drying alkyd with good flow characteristics. | |
| Crestakyd® 10-2505 | Scott Bader | Crestakyd® 10-2505 is suitable for high solids decorative paints and lacquers with excellent durability. | |
| Crestakyd® 10-3507 | Scott Bader | Crestakyd® 10-3507 is a top quality alkyd for use in decorative gloss paints and varnishes. | |
| AFCONA - 1102 | AFCONA Additives Sdn Bhd | AFCONA - 1102 is a modified acrylic polymer in a butyl acetate and methoxy propyl acetate solvent. This product provides viscosity reduction, is economic, and is widely compatible, especially in thermoplastic resins and epoxy. AFCONA - 1102 functions as a universal dispersing resin for the preparation of universal pigment concentrates, finding application in primer...weiterlesen AFCONA - 1102 is a modified acrylic polymer in a butyl acetate and methoxy propyl acetate solvent. This product provides viscosity reduction, is economic, and is widely compatible, especially in thermoplastic resins and epoxy. AFCONA - 1102 functions as a universal dispersing resin for the preparation of universal pigment concentrates, finding application in primers, coatings, paints, and decorative paints. verkürzen | |
| Disvester-850 | D.S.V. Chemicals Pvt. Ltd. | Disvester-850 is an esterified epoxy resin. This product derives from mixed-length oils. It can be used in automotive primers, chemically resistant coatings, air-drying and stoving paints, and metallic decoration varnishes. | |
| CHS-Alkyd S 471 WX 55 | Spolchemie | CHS-Alkyd S 471 WX 55 is a medium oiled binder with low lift effect to substrate for solvent coatings. This product is made from soybean oil. It is provided as a medium viscous 55% solution in a mixture of white spirit and xylene. CHS-Alkyd S 471 WX 55 is...weiterlesen CHS-Alkyd S 471 WX 55 is a medium oiled binder with low lift effect to substrate for solvent coatings. This product is made from soybean oil. It is provided as a medium viscous 55% solution in a mixture of white spirit and xylene. CHS-Alkyd S 471 WX 55 is primarily used for producing priming paints, enamels and quick drying coatings and lacquers. verkürzen | |
| BYD6010 | Tianyi Chemical Engineering Material Co., Ltd. | BYD6010, in the form of a liquid emulsion, is a waterborne UV-curing resin that can be used in wood primers and inks. This product has a rapid cure and it wets underlying substrates well. It is non toxic and the end product will have a high gloss. | |
| AFCONA - 1101 | AFCONA Additives Sdn Bhd | AFCONA - 1101 is a modified acrylic polymer in a butyl acetate and methoxy propyl acetate solvent. This product has low concentrate viscosity, provides pigment stability, is widely compatible, and can cross-link in polyurethane systems and baking paints. AFCONA - 1101 functions as a universal dispersing resin for the preparation of universal pigment concentrates, finding application in primer...weiterlesen AFCONA - 1101 is a modified acrylic polymer in a butyl acetate and methoxy propyl acetate solvent. This product has low concentrate viscosity, provides pigment stability, is widely compatible, and can cross-link in polyurethane systems and baking paints. AFCONA - 1101 functions as a universal dispersing resin for the preparation of universal pigment concentrates, finding application in primers, coatings, paints, and decorative paints. verkürzen | |
| WorléeKyd SM 400 | Worlée-Chemie G.m.b.H. | W´Kyd SM 400 ist ein kurzöliges, sehr schnelltrocknendes Alkydharz auf der Basis trocknender, pflanzlicher Fettsäuren zur Herstellung luft- und ofentrocknender Grund- und Decklacke. | |
| Hydro-Rez™ 1100D A | Lawter | Hydro-Rez™ 1100D A is a stable water-based sulfo polyester polymer dispersion with no surfactants or solvents. Since it also has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on the press. The product gives off a low odor, gloss, fast drying speed, rub, transparency, adhesion and scuff resistance on coatings, primers and inks. Hydro-Rez™ 1100D A is suitable for use in water-based coatings and primer...weiterlesen Hydro-Rez™ 1100D A is a stable water-based sulfo polyester polymer dispersion with no surfactants or solvents. Since it also has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on the press. The product gives off a low odor, gloss, fast drying speed, rub, transparency, adhesion and scuff resistance on coatings, primers and inks. Hydro-Rez™ 1100D A is suitable for use in water-based coatings and primers as well as water-based gravure and flexo inks. verkürzen | |
| Hydro-Rez™ 1200D2 A | Lawter | Hydro-Rez™ 1200D2 A is a water-based sulfo polyester polymer dispersion with 30% resin solids with no amines or ammonia. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on the press. The product has the benefit of providing low odor, gloss, adhesion, transparency, fast drying speed and water, rub and scuff resistance on coatings, primers and inks. Hydro-Rez™ 1200D2 A is suitable for use in water-based coatings and primer...weiterlesen Hydro-Rez™ 1200D2 A is a water-based sulfo polyester polymer dispersion with 30% resin solids with no amines or ammonia. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on the press. The product has the benefit of providing low odor, gloss, adhesion, transparency, fast drying speed and water, rub and scuff resistance on coatings, primers and inks. Hydro-Rez™ 1200D2 A is suitable for use in water-based coatings and primers and in water-based gravure and flexo inks. verkürzen | |
| Estergum-751 | D.S.V. Chemicals Pvt. Ltd. | Estergum-751 is an esterified rosin derivative. This product derives from penta polyols. It can be used in primers, undercoats, adhesives, and nitrocellulose lacquers. | |
| Hydro-Rez™ 1400D A | Lawter | Hydro-Rez™ 1400D A is a water-based sulfo polyester polymer dispersion which, when used as a plasticizer, helps film formation, adhesion and flexibility when used on non-absorbent substrates. It has no ammonia or amines for neutralization. This means that pH neutral inks formulated with the product's resins don't need pH adjustment on the press. Hydro-Rez™ 1400D A provides gloss, low odor, adhesion, fast drying speed, rub, transparency and scuff resistance to coatings, inks and primers. It is suitable for use in waster-based coatings and primer...weiterlesen Hydro-Rez™ 1400D A is a water-based sulfo polyester polymer dispersion which, when used as a plasticizer, helps film formation, adhesion and flexibility when used on non-absorbent substrates. It has no ammonia or amines for neutralization. This means that pH neutral inks formulated with the product's resins don't need pH adjustment on the press. Hydro-Rez™ 1400D A provides gloss, low odor, adhesion, fast drying speed, rub, transparency and scuff resistance to coatings, inks and primers. It is suitable for use in waster-based coatings and primers and in water-based gravure and flexo inks. verkürzen | |
| Hydro-Rez™ 2140D A | Lawter | Hydro-Rez™ 2140D A is a water-based sulfo polyester polymer dispersion that is compatible with various inorganic and organic pigments which allow it to develop a complete color palette. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with resins from the product line don't need pH adjustment on the press. The product gives off a fast drying speed, low odor, adhesion, gloss, rub, transparency and scuff resistance to coatings, inks and primers. Hydro-Rez™ 2140D A is suitable for use in water-based primer...weiterlesen Hydro-Rez™ 2140D A is a water-based sulfo polyester polymer dispersion that is compatible with various inorganic and organic pigments which allow it to develop a complete color palette. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with resins from the product line don't need pH adjustment on the press. The product gives off a fast drying speed, low odor, adhesion, gloss, rub, transparency and scuff resistance to coatings, inks and primers. Hydro-Rez™ 2140D A is suitable for use in water-based primers and coatings and in water-based gravure and flexo inks. verkürzen | |
| WorléeDur D 6311 (60% In Dearomatized HC 160-200) | Worlée-Chemie G.m.b.H. | WorléeDur D 6311 (60% In Dearomatized HC 160-200) is an air drying long oil, modified epoxy ester for the manufacture of special anticorrosion and adhesion primers. W´Dur D 6311 should not be combined with other binders. Adhesion properties could become w...weiterlesen WorléeDur D 6311 (60% In Dearomatized HC 160-200) is an air drying long oil, modified epoxy ester for the manufacture of special anticorrosion and adhesion primers. W´Dur D 6311 should not be combined with other binders. Adhesion properties could become worse. Primers based on W´Dur D 6311 show good application properties (brush application), good flow and good adhesion properties. verkürzen | |
| HALOX® 515 | ICL Phosphate Specialty | HALOX® 515 by ICL is an aminocarboxylate salt-based, liquid organic corrosion inhibitor for high gloss (direct-to-metal) coating systems. It is effective as a flash rust inhibitor on weld seams. It is suitable for water-based acrylic DTM, acrylic primers,...weiterlesen HALOX® 515 by ICL is an aminocarboxylate salt-based, liquid organic corrosion inhibitor for high gloss (direct-to-metal) coating systems. It is effective as a flash rust inhibitor on weld seams. It is suitable for water-based acrylic DTM, acrylic primers, polyurethane, water-dispersible alkyds, and water-reducible alkyds. It provides cost-effective flash rust protection and long-term corrosion protection. It is also effective for thin film applications (<2 mils). HALOX® 515 is heavy metal- & nitrite-free and contains no chromates or phosphates. It provides improved adhesion at the scribe and good humidity resistance. It can be easily and effectively post-added or added in the letdown stage of any coating system. The dosage level of the grade is 1-3% based on the total formula weight. It has a shelf life of 24 months. verkürzen | Request Sample |
| Polurgreen ES.P | S.A.P.I.C.I. SpA | Polurgreen ES.P is a mixed isocyanurate. This product has good yellowing resistance and good hardness. It can be used in clear or pigmented polyurethane high gloss topcoats with high solids content. Its high nitrocellulose facilitates good cross-linkin...weiterlesen Polurgreen ES.P is a mixed isocyanurate. This product has good yellowing resistance and good hardness. It can be used in clear or pigmented polyurethane high gloss topcoats with high solids content. Its high nitrocellulose facilitates good cross-linking with higher hydroxide-content resins. This product contains less than .5% TDI isocyanates and less than .1% HDI isocyanates. verkürzen | |
| Resygs SPG 5050 | SGS Polimeros | Resygs SPG 5050 is a conventional alkyd resin. This product is designed for mechanical paints, synthetic paints and primers, automotive repainting, dye concentrates, decorative enamels, and wood varnishes and sealants. | |
| Crestakyd® 20-5036 | Scott Bader | Crestakyd® 20-5036 is a chain stopped alkyd used for general industrial air drying primers and enamels. | |
| CHS-Alkyd TRI 841 | Spolchemie | CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for thi...weiterlesen CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for this product is estimated to be around 84%. CHS-Alkyd TRI 841 is primarily for stains, penetrates and topcoats for metal and wood surfaces. It is also used as a binder in printing inks and pigment pastes. This product can be used as a reactive diluent for solvent borne to drop viscosity and VOC levels. verkürzen | |
| HALOX® 430 JM | ICL Phosphate Specialty | HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic, anti-corrosive pigment. It is based on the synergy between an ion scavenging and passivation mechanism. HALOX® 430 JM is recommended for use in long-term applications where the use of heavy metals such as zinc, strontium, barium, molybdenum, and chromate is of concern. It is suitable for epoxy esters, moisture-cure polyurethanes, short-, medium- & long oil alkyds, and silicones. It can also be used in clear-, powder-, aerospace- & coil coatings and wash & etch primer...weiterlesen HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic, anti-corrosive pigment. It is based on the synergy between an ion scavenging and passivation mechanism. HALOX® 430 JM is recommended for use in long-term applications where the use of heavy metals such as zinc, strontium, barium, molybdenum, and chromate is of concern. It is suitable for epoxy esters, moisture-cure polyurethanes, short-, medium- & long oil alkyds, and silicones. It can also be used in clear-, powder-, aerospace- & coil coatings and wash & etch primer. It offers significant advantages such as thin film applications (<10 microns), easier to disperse, cleaner grinds, and improved efficiency. The dosage level for the coating systems such as water- & solventborne 2K epoxy is 2-6% & 8-12% & for alkyds, modified alkyds, and 2K polyurethane is 2-6% & 6-10% respectively, for waterborne acrylic copolymer is 2-5% and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. verkürzen | Request Sample |
| Resygs SPG 4060 | SGS Polimeros | Resygs SPG 4060 is a pure alkyd resin, characterized by its high viscosity, chemical resistance, and hardness. This product is used in furniture paints, primers, sealants, lacquers, fillers, and automotive repainting varnishes. | |
| Hydro-Rez™ 1000D A | Lawter | Hydro-Rez™ 1000D A is a water-based sulfo polyester polymer dispersion that can be used in combination with a higher Tg sulfo polyester polymer as a plasticizing resin or just as a lone resin. When it is used as a plasticizer, the polymer improves film formation, adhesion and flexibility on non-absorbent substrates. The product is a stable dispersion with no surfactants or solvents. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on the press. The polymer has the benefit of giving off gloss, adhesion, transparency, fast drying speeds, low odor and scuff resistance on coatings, inks and primers. It is ideally suited for use in water-based primer...weiterlesen Hydro-Rez™ 1000D A is a water-based sulfo polyester polymer dispersion that can be used in combination with a higher Tg sulfo polyester polymer as a plasticizing resin or just as a lone resin. When it is used as a plasticizer, the polymer improves film formation, adhesion and flexibility on non-absorbent substrates. The product is a stable dispersion with no surfactants or solvents. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on the press. The polymer has the benefit of giving off gloss, adhesion, transparency, fast drying speeds, low odor and scuff resistance on coatings, inks and primers. It is ideally suited for use in water-based primers and coatings or in water-based gravure and flexo inks. verkürzen | |
| WorléeThix S 6455 | Worlée-Chemie G.m.b.H. | W´Thix S 6455 ist ein thixotropes, langöliges Alkydharz zur Herstellung von thixotropen Anstrichsystemen. | |
| WorléeKyd SM 426 | Worlée-Chemie G.m.b.H. | W´Kyd SM 426 ist ein kurzöliges, sehr schnelltrocknendes Alkydharz auf der Basis trocknender, pflanzlicher Fettsäuren zur Herstellung luft- und ofentrocknender Grund- und Decklacke. | |
| Crestakyd® 20-9074 | Scott Bader | Crestakyd® 20-9074 is a rapid drying alkyd that has excellent gloss / weathering resistance and flow characteristics. It can be used for primers and other air-dry industrial finishes. | |
| SHIELDEX® AC 5 Non-Toxic Anti-Corrosion Pigment | Univar Solutions | SHIELDEX® AC 5 Non-Toxic Anti-Corrosion Pigment is a calcium ion-exchanged amorphous silica appearing as a white, free flowing powder. It is an easily dispersible, non-toxic, high performance anti-corrosion pigment. This product is mainly used for water-b...weiterlesen SHIELDEX® AC 5 Non-Toxic Anti-Corrosion Pigment is a calcium ion-exchanged amorphous silica appearing as a white, free flowing powder. It is an easily dispersible, non-toxic, high performance anti-corrosion pigment. This product is mainly used for water-borne paint systems, general industrial coatings, maintenance and protective coating applications and automotive paints. verkürzen | |
| CHS-Alkyd Trim 551 W 85 | Spolchemie | CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primar...weiterlesen CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primary use for this product is for fast drying protective metal and wood coatings that have high hardness with hard lacquers, anticorrosive paints and varnishes. verkürzen | |
| HS9553 | Tianyi Chemical Engineering Material Co., Ltd. | HS9553, in the form of a transparent liquid, is a solventborne aliphatic urethane acrylate that can be used as a curing agent in special material primers and BMC high-temperature resistant coating systems. This product adheres well to its underplating. I...weiterlesen HS9553, in the form of a transparent liquid, is a solventborne aliphatic urethane acrylate that can be used as a curing agent in special material primers and BMC high-temperature resistant coating systems. This product adheres well to its underplating. Its substrate is a high-performance oligomer that is designed for radiation and peroxide curing applications. verkürzen | |
| CHS-Alkyd AL 3964 | Spolchemie | CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment to 8.2 – 8.6 with ammonia or amine. CHS-Alkyd AL 3964 is primarily used for fast drying solvent primer...weiterlesen CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment to 8.2 – 8.6 with ammonia or amine. CHS-Alkyd AL 3964 is primarily used for fast drying solvent primers, topcoats and one-layer coatings for industrial use. The application works by spraying, dipping and flooding. Due to low thermo plasticity in CHS-Alkyd AL 3964 it rapidly air dries to provide corrosion resistance and flexibility. verkürzen | |
| WorléePol® 6756 | Worlée-Chemie G.m.b.H. | WorléePol® 6756 is a saturated, hydroxy functional polyester resin for the manufacture of solvent based "ultra high solids" 2 component PUR systems for industrial and automotive repair paints with good mechanical properties and excellent chemical and weat...weiterlesen WorléePol® 6756 is a saturated, hydroxy functional polyester resin for the manufacture of solvent based "ultra high solids" 2 component PUR systems for industrial and automotive repair paints with good mechanical properties and excellent chemical and weather resistance. verkürzen | |
| WorléePol® 6741 | Worlée-Chemie G.m.b.H. | WorléePol® 6741 is a saturated, hydroxy functional polyester resin for the manufacture of solvent based "ultra high solids" 2 component PUR systems. This grade has a non volatile content of 80% ± 1. Normally this polyester resin is used as a sole binder o...weiterlesen WorléePol® 6741 is a saturated, hydroxy functional polyester resin for the manufacture of solvent based "ultra high solids" 2 component PUR systems. This grade has a non volatile content of 80% ± 1. Normally this polyester resin is used as a sole binder or modifying component for isocyanate crosslinking solvent based high solid coatings. verkürzen | |
| Domide GX-460 | Kukdo Chemical Co., Ltd. | Domide GX-460 is a Polyamidoamine / Epoxy adduct dissolved in Ethanol for reaction with solid or liquid Epoxy Resins. GX-460 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin for for...weiterlesen Domide GX-460 is a Polyamidoamine / Epoxy adduct dissolved in Ethanol for reaction with solid or liquid Epoxy Resins. GX-460 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin for formulation of high solid coatings. In addition, it is well suited for use in the production of primers and maintenance coatings for marine and industrial purposes. verkürzen | |
| PAT-ADD DA 817 | Patcham USA | PAT-ADD DA 817 is a wetting, dispersing and anti-sedimentation additive for a wide variety of industrial paints. The product is solvent-free and applicable for waterborne, solvent-borne and solvent-free paint, inks and pigment dispersions. It is particularly effective as anti-settling agent for silica-based matting agents and as an anti-sedimentation agent in aqueous primers. Main benefits are: highly effective dispersant for acidic pigments, including silica and carbon black, optimizes milling operation, enabling higher pigment loading, wide range compatibility, in solvent-borne, solvent-free and most waterborne systems, excellent performances in stabilizing silica-matting agents, and prevents hard sedimentation in waterborne as well as solvent-borne primer...weiterlesen PAT-ADD DA 817 is a wetting, dispersing and anti-sedimentation additive for a wide variety of industrial paints. The product is solvent-free and applicable for waterborne, solvent-borne and solvent-free paint, inks and pigment dispersions. It is particularly effective as anti-settling agent for silica-based matting agents and as an anti-sedimentation agent in aqueous primers. Main benefits are: highly effective dispersant for acidic pigments, including silica and carbon black, optimizes milling operation, enabling higher pigment loading, wide range compatibility, in solvent-borne, solvent-free and most waterborne systems, excellent performances in stabilizing silica-matting agents, and prevents hard sedimentation in waterborne as well as solvent-borne primers. verkürzen | Request Sample |
| HALOX® SZP-391 | ICL Phosphate Specialty | HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-base...weiterlesen HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyesters, and silicones. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, chlorinated polymers, and acrylics. It is designed for use in high acid value resins, latexes, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-391 make it the pigment of choice in thin film applications (<1 mil or 25 microns). The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. verkürzen | Request Sample |
| Polurgreen HR-01 | S.A.P.I.C.I. SpA | Polurgreen HR-01 is a low-monomer isocyanurate. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. It is composed of less than .1% TDI isocyanate, and is based in a butyl-acetate solvent. | |
| Polurene SB 50 AB | S.A.P.I.C.I. SpA | Polurene SB 50 AB is an isocyanurate with low free TDI content. This product has good flexibility with a long pot life. It can be used in sealers, matt and semigloss topcoats. Polurene SB 50 AB shows good solubility in aromatic solvents. It contains l...weiterlesen Polurene SB 50 AB is an isocyanurate with low free TDI content. This product has good flexibility with a long pot life. It can be used in sealers, matt and semigloss topcoats. Polurene SB 50 AB shows good solubility in aromatic solvents. It contains less than .5% TDI isocyanates. verkürzen | |
| WorléeFen F 130 | Worlée-Chemie G.m.b.H. | WorléeFen F 130 ist ein harzmodifiziertes Phenolharz. Vorwiegend zum Einsatz zur Trocknungsverbesserung bei Alkydharzlacken und als Hartharzkomponente für schnelltrocknende Öllacke und Druckfarben. | |
| Nubirox 106 in a Solventborne Epoxy System (Formulation #EPPA 12881) | Ferro Pigments | Formulation EPPA 12881 is an anticorrosive formulation based on a solventborne epoxy system and Nubirox 106. | |
| Crestakyd® 41-5009 | Scott Bader | Crestakyd® 41-5009 is a styrene modified alkyd used for hammer finishes and quick drying enamels. Also used in the marine industry for quick drying coatings. | |
| WorléeKyd AC 2550 | Worlée-Chemie G.m.b.H. | WorléeKyd AC 2550 is a short oil length very fast drying acrylated alkyd resin. W´Kyd AC 2550 is compatible with some short and medium oil length drying alkyds. W´Kyd AC 2550 is mainly recommended for very fast drying primers and top coats. | |
| Disvipol-203 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-203 is a rosin derivative. This product has been modified with phenolic compounds. It can be used in anticorrosive paints, marine finishes, sealants, primers, insulating varnishes, and oil varnishes. | |
| Rexin 143 | S.A.P.I.C.I. SpA | Rexin 143 is a short-oil alkyd resin. This product dries quickly with good flexibility, solvent release, and wetting properties. It can be used in pigmented sealers or topcoats. It can also be used in nitrocellulose or acid-curing systems. | |
| HALOX® CW-491 | ICL Phosphate Specialty | HALOX® CW-491 by ICL is a low-cost, moderate solubility calcium phosphosilicate-based corrosion inhibiting pigment. It is designed to provide mid-level corrosion protection. It is suitable for solvent-based epoxy, epoxy ester, and short-, medium- & long oil alkyds. It is also suitable for water-based epoxy, wash primer...weiterlesen HALOX® CW-491 by ICL is a low-cost, moderate solubility calcium phosphosilicate-based corrosion inhibiting pigment. It is designed to provide mid-level corrosion protection. It is suitable for solvent-based epoxy, epoxy ester, and short-, medium- & long oil alkyds. It is also suitable for water-based epoxy, wash primers, direct-to-metal finishes, 2k solvent-based epoxies, water-reducible alkyds, acrylics, polyvinyl chloride resins, and polyesters. HALOX® CW-491 is a white, non-refractive, zinc-, & heavy metal-free grade that is used for protective coating systems. The dosage level of the grade is 5-8% based on the total formula weight for water-based systems and 7-12% based on the total formula weight for solvent-based systems. It has a shelf life of 36 months. verkürzen | Request Sample |
| Crestakyd® 44-5043 | Scott Bader | Crestakyd® 44-5043 is a rosin and phenolic alkyd used for general purpose. Rosin and phenolic alkyd used for dry and excellent solvent release. | |
| SHIELDEX® AC 3 Non-Toxic Anti-Corrosion Pigment | Univar Solutions | SHIELDEX® AC 3 Non-Toxic Anti-Corrosion Pigment is a calcium ion-exchanged amorphous silica appearing as a white, free flowing powder. It is an easily dispersible, non-toxic, high performance anti-corrosion pigment with low particle size. This grade is used in coil coating primers and one- or two-component wash primer...weiterlesen SHIELDEX® AC 3 Non-Toxic Anti-Corrosion Pigment is a calcium ion-exchanged amorphous silica appearing as a white, free flowing powder. It is an easily dispersible, non-toxic, high performance anti-corrosion pigment with low particle size. This grade is used in coil coating primers and one- or two-component wash primers. verkürzen | |
| Domide GX-483 | Kukdo Chemical Co., Ltd. | Domide GX-483 is a Polyamidoamine/Epoxy adduct designed for reaction with solid or liquid Epoxy Resins. GX-483 can be easily formulated to comply with VOC regulation. This product gives excellent compatibility with solid and liquid Epoxy Resin for formulation of high solid coatings. In addition, it is well suited for use in the production of primer...weiterlesen Domide GX-483 is a Polyamidoamine/Epoxy adduct designed for reaction with solid or liquid Epoxy Resins. GX-483 can be easily formulated to comply with VOC regulation. This product gives excellent compatibility with solid and liquid Epoxy Resin for formulation of high solid coatings. In addition, it is well suited for use in the production of primers and maintenance coatings for industrial and marine purposes. verkürzen | |
| HS23-60 | Tianyi Chemical Engineering Material Co., Ltd. | HS23-60, in the form of a clear, transparent, viscous liquid, is a hydroxy acrylic resin that can be used in polyurethane surface coatings, floor coatings, automotive coatings, and top coats. This product has high gloss, is flexible, and shows weather-re...weiterlesen HS23-60, in the form of a clear, transparent, viscous liquid, is a hydroxy acrylic resin that can be used in polyurethane surface coatings, floor coatings, automotive coatings, and top coats. This product has high gloss, is flexible, and shows weather-resistant characteristics. The end product will dry easily with a light-colored finish. verkürzen | |
| ASCONIUM® 143 | ASCOTEC | ASCONIUM® 143 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU, 2K PU or epoxy resins. | Request Sample |
| WorléeThix SD 6051 (55% In Dearomatized HC 160-200) | Worlée-Chemie G.m.b.H. | W´Thix SD 6051 ist ein thixotropes, langöliges Alkydharz für Vorlacke, Füllgründe, Glanzlacke und Seidenglanzfarben. | |
| WorléeKyd MH 439 (60% In White Spirit 135/175/SOLVENON PM) | Worlée-Chemie G.m.b.H. | WorléeKyd MH 439 ist ein kurzöliges, gut trocknendes Alkydharz auf Basis spezieller Mischölfettsäuren zur Herstellung luft- und forcierttrocknender Grund- und Decklacke. | |
| HALOX® 430 | ICL Phosphate Specialty | HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scav...weiterlesen HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scavenging and passivation mechanism. It is used in solvent-based moisture cure polyurethanes, short-, medium- & long oil alkyds & silicones, and water-based polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. HALOX® 430 is recommended for long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate is of concern. The dosage level for solvent-borne and waterborne 2K epoxy, alkyds & modified alkyds polyurethane is 6-10% & 3-6% respectively, for waterborne acrylic copolymer is 3-5%, and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. verkürzen | Request Sample |
| HALOX® BW-111 | ICL Phosphate Specialty | HALOX® BW-111 by ICL is a low-cost barium phosphosilicate-based corrosion inhibiting pigment. It is a white, non-refractive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is recommended for use in solvent...weiterlesen HALOX® BW-111 by ICL is a low-cost barium phosphosilicate-based corrosion inhibiting pigment. It is a white, non-refractive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is recommended for use in solvent-based epoxy systems, both conventional and high solids. The dosage level is 5-10% based on total formula weight for conventional systems and 10-20% based on total formula weight in higher solids systems. HALOX® BW-111 has a shelf life of 36 months. verkürzen | Request Sample |
| WorléeKyd MH 439 (60% In Xylene) | Worlée-Chemie G.m.b.H. | W´Kyd MH 439 ist ein kurzöliges, gut trocknendes Alkydharz auf Basis spezieller Mischölfettsäuren zur Herstellung luft- und forcierttrocknender Grund- und Decklacke. | |
| Crestakyd® 20-5029 | Scott Bader | Crestakyd® 20-5029 is a chain stopped alkyd used for general industrial air drying finishes and machinery enamels. | |
| Crestakyd® 20-9021 | Scott Bader | Crestakyd® 20-9021 is an economical chain stopped alkyd used for fast drying machinery enamels. | |
| HALOX® CW-2230 | ICL Phosphate Specialty | HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in ...weiterlesen HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in protective coating systems. It is suitable for solvent-based epoxies, moisture-cure polyurethanes, polyesters, silicone, water-based epoxy, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, and acrylics. It has the highest borate content and can be effectively formulated into such resins as medium and long-oil alkyds and epoxy-esters. Recommended dosage levels range from 9-15% based on total formula weight with PVC levels ranging from 42-47%. It has a shelf life of 36 months. HALOX® CW-2230 is compliant with ASTM D4288-83, specification for calcium borosilicate pigment Type 2. verkürzen | Request Sample |
| WorléeKyd L 138 | Worlée-Chemie G.m.b.H. | Worléekvd L 138 ist ein kurzöliges, mit Phenolharz modifiziertes, schnelltrocknendes Alkydharz mit einem Ölanteil, der sich aus einem Leinol-Holzölgemisch zusammensetzt | |
| Amirez 148/010 | Incorez Ltd. | Amirez 148/010 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features a long pot life, low viscosity, zero VOC, and good freeze/thaw stability. It is completely compatible with cement and calcium salt and is particularly well suited for high temperature climates. Incorez 148/010 is used fro floor and wall paints, hygiene coatings, concrete primer...weiterlesen Amirez 148/010 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features a long pot life, low viscosity, zero VOC, and good freeze/thaw stability. It is completely compatible with cement and calcium salt and is particularly well suited for high temperature climates. Incorez 148/010 is used fro floor and wall paints, hygiene coatings, concrete primers, and gloss paints. verkürzen | |
| WorléeDur D 6311 (60% In Dearomatized HC 140-165) | Worlée-Chemie G.m.b.H. | W´Dur D 6311 ist ein lufttrocknender langöliger, modifizierter Epoxidester zur Herstellung von speziellen Rostschutz- und Haftgrundierungen. | |
| WorléeDur D 6311 (60% In White Spirit 145-195) | Worlée-Chemie G.m.b.H. | W´Dur D 6311 ist ein lufttrocknender langöliger, modifizierter Epoxidester zur Herstellung von speziellen Rostschutz- und Haftgrundierungen. | |
| BYD7630 | Tianyi Chemical Engineering Material Co., Ltd. | BYD7630, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a universal binder for applications such as interior and exterior wall coatings, metal surface coatings, primers, textiles, heat insulation, press...weiterlesen BYD7630, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a universal binder for applications such as interior and exterior wall coatings, metal surface coatings, primers, textiles, heat insulation, pressure sensitive tape, and more. This product offers strong cohesive strength and high viscosity. Its pH value is 5.0 +/- 1.0. verkürzen | |
| ASCOTRUST® X1 | ASCOTEC | ASCOTRUST® X1 is a liquid, tannic acid free, rust-converting additive for waterborne coatings. It is mainly used in waterborne paints to enable the direct application on rust or poorly prepared surfaces. | Request Sample |
| WorléeDur D 46 | Worlée-Chemie G.m.b.H. | W´Dur D 46 ist ein Epoxidester auf der Basis trocknender, konjugierter Fettsäuren. Anwendung als luft- und ofentrocknendes Bindemittel für Haftgrundierungen, Korrosionsschutz- und Zinkstaubfarben, außerdem chemikalien- und tropenfeste Lackierungen. | |
| HALOX® 550 | ICL Phosphate Specialty | HALOX® 550 by ICL is an inorganic-organic hybrid sol-gel corrosion inhibitor that protects water-based and solvent-based coatings. It can boost the adhesion of the systems through the development of a sol-gel network and the formation of hydrophobic nano-domains within the coating. It is suitable for clear coats, direct-to-metal, latex primer...weiterlesen HALOX® 550 by ICL is an inorganic-organic hybrid sol-gel corrosion inhibitor that protects water-based and solvent-based coatings. It can boost the adhesion of the systems through the development of a sol-gel network and the formation of hydrophobic nano-domains within the coating. It is suitable for clear coats, direct-to-metal, latex primers, thin film coatings, acrylic emulsions, water-dispersible alkyds, alkyd emulsions, polyesters, epoxy, urethane, and high gloss coatings. It is easy to disperse, post-addable, and reduces white rust on galvanized and black rust on Galvalume™. It offers increased hydrophobicity, improved anti-fingerprint, and no effect on gloss. It provides reduced silver, aluminum oxidation and high-temperature stability. HALOX® 550 is non-flammable, pH stable, and has a low freeze point. It is a temporary rust inhibitor for cold-rolled steel, blasted steel, and aluminum. It can impart corrosion resistance to final metal rinsing solutions. The dosage level for water-based acrylic is 1-4%, alkyd is 0.5-2%, epoxy is 1-4%, urethane is 0.5-3%, hybrids & others is 0.5-4%. It has a shelf life of 12 months. verkürzen | Request Sample |
| HydriCryl 130-S | Hydrite Chemical Co. | HydriCryl 130-S is a high viscosity, high molecular weight resin solution. This product is well suited for use in water-based ink and coatings. | |
| HydriCryl 132 | Hydrite Chemical Co. | HydriCryl 132 is a gloss, block, transfer, and resolubility modifier. This product is well suited for use in water-based ink and coatings. | |
| HydriCryl 132HV | Hydrite Chemical Co. | HydriCryl 132HV is a high viscosity mid range molecular weight resin solution. This product is well suited for use in water-based ink and coatings. | |
| Lucidene 605 NV | Hydrite Chemical Co. | Lucidene 605 NV is an emulsion that displays outstanding adhesion, water resistance, and low VOC content. This product is well suited for use in water-based inks and coatings. | |
| Lucidene 202 | Hydrite Chemical Co. | Lucidene 202 is a water-based styrene/acrylic copolymer designed for use with metallic pigments. This product is well suited for use in water-based inks and coatings. | |
| HydriCryl 410 | Hydrite Chemical Co. | HydriCryl 410 is an emulsion polymer optimized for high pigment load dispersion applications. This product is well suited for use in water-based inks and coatings. | |
| HydriCryl 430 | Hydrite Chemical Co. | HydriCryl 430 is a high gloss polymer with good resolubility and transfer when used in neutral pH systems. This product is well suited for use in water-based inks and coatings. | |
| HydriCryl 460 | Hydrite Chemical Co. | HydriCryl 460 is a emulsion polymer that displays maximum pigment wetting and high pigment loads at stable low viscosity. This product is well suited for use in water-based inks and coatings. | |
| WorléeThix V 800 (38.5%-41.5% In Isoparaffin HC 170-200) | Worlée-Chemie G.m.b.H. | W´Thix V 800 ist ein anthixotropiertes strukturviskoses urethanisiertes Alkydharz. Die Gelstruktur ist durch Zusatz von polaren Lösungsmitteln und durch Wärmezufuhr nicht vollständig abbaubar. | |
| WorléeThix V 800 (48%-52% In Dearomatized HC 160-200) | Worlée-Chemie G.m.b.H. | W´Thix V 800 ist ein thixotropes strukturviskoses urethanisiertes Alkydharz. Die Gelstruktur ist durch Zusatz von polaren Lösungsmitteln und durch Wärmezufuhr nicht vollständig abbaubar.. | |
| HS9301 | Tianyi Chemical Engineering Material Co., Ltd. | HS9301, in the form of a transparent resin, is a pure acrylate resin that can be used in vacuum plating surface paints, top coating varnishes, or metal UV paints. This product is soluble in active monomers or inert solvents. | |
| Lucidene 645 | Hydrite Chemical Co. | Lucidene 645 is an acrylic/urethane emulsion featuring high gloss and good alkaline and detergent resistance. This product is well suited for use in water-based inks and coatings. | |
| HydriCryl 345 | Hydrite Chemical Co. | HydriCryl 345 is a low molecular weight solution resin for enhancing gloss in coatings and overprint varnishes. | |
| HALOX® 570 | ICL Phosphate Specialty | HALOX® 570 by ICL is an organic corrosion inhibitor. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is an environmentally-friendly, nitrite-free, phosphate-free, and heavy metal-free, which can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams and in some cases, can also be used in solvent-based coatings and in UV-cured systems. It is used in both water-based primer...weiterlesen HALOX® 570 by ICL is an organic corrosion inhibitor. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is an environmentally-friendly, nitrite-free, phosphate-free, and heavy metal-free, which can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams and in some cases, can also be used in solvent-based coatings and in UV-cured systems. It is used in both water-based primers and direct-to-metal topcoats and has minimal effect on gloss reduction. HALOX® 570 can be used in formulations based on water-based acrylic latexes and co-polymers, styrene/acrylic latexes, acrylated epoxy esters, thin films, 2-pack epoxy systems, alkyds, alkyd/acrylic blends, and 1 or 2 pack polyurethane. It has a shelf life of 36 months. verkürzen | Request Sample |
| ASCOTRAN® H17 | ASCOTEC | ASCOTRAN® H17 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash ...weiterlesen ASCOTRAN® H17 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash rust (welding, sand-blasted...) during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). verkürzen | Request Sample |
| Nubirox SP | Ferro Pigments | Nubirox SP is a unique, special particle Zinc Phosphate. It is a white Anticorrosive pigment with high specific surface, much more efficient than conventional Zinc Phosphate. | |
| HALOX® SZP-391 JM | ICL Phosphate Specialty | HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the s...weiterlesen HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the same proprietary blend of strontium and zinc phosphosilicates as HALOX® SZP-391 at reduced particle size. It provides easy dispersion, cleaner grinds and improved efficiency. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyurethane- & alkyd dispersions, water-reducible alkyds, chlorinated polymers, acrylics, polyesters and silicones. It offers increased ease of incorporation. HALOX® SZP-391 JM is designed for use in thin film (<25 microns) and clear coats (<10 microns). It is designed for use in latexes, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. verkürzen | Request Sample |
| AKTIFIT AM | Hoffmann Mineral | AKTIFIT AM is an activated SILFIT Z 91, produced by modifying the surface with amino functional silane. It is used as a functional filler either on its own or combined with extenders or matting agents. An optimum effect will be obtained in polar elastomer...weiterlesen AKTIFIT AM is an activated SILFIT Z 91, produced by modifying the surface with amino functional silane. It is used as a functional filler either on its own or combined with extenders or matting agents. An optimum effect will be obtained in polar elastomers in combination with sulfur or sulfur donor, amine or bisphenolic crosslinking systems. This product can be used whenever high tensile strength and high modulus, combined with a very low tensile and compression set, are as important as excellent processing and extrusion properties. verkürzen | |
| Nubirox 213 | Ferro Pigments | Nubirox 213 is a labeling-free, beige Anticorrosive pigment. It is a multiphase Iron and Zinc Phosphate with good performance specially in solventborne epoxy and alkyd sytems. | |
| Coadis™ 144 A | Arkema Rheology & Specialty Additives | Coadis™ 144 A is a universal pigment dispersant which provides outstanding performance accross a broad spectrum of waterborne exterior and interior coating formulations. It exhibits excellent stability and compatibility and is designed to enable maximized...weiterlesen Coadis™ 144 A is a universal pigment dispersant which provides outstanding performance accross a broad spectrum of waterborne exterior and interior coating formulations. It exhibits excellent stability and compatibility and is designed to enable maximized gloss potentien which providing ideal viscosity, flow and wet adhesion from flat to high gloss systems. verkürzen | |
| ASCONIUM® 142DA | ASCOTEC | ASCONIUM® 142DA is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU or 2K PU resins. | Request Sample |
| ASCOTRAN® H10 | ASCOTEC | ASCOTRAN® H10 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion ...weiterlesen ASCOTRAN® H10 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). verkürzen | Request Sample |
| MOWITAL® B 30 HH | Kuraray America, Inc. | Polyvinyl butyral (PVB) grades with different molecular weights and varying degrees of acetalization. They are used as binders for coatings, printing inks, powder coatings and textile printing. They are also used as wetting agents and adhesives. | |
| MOWITAL® B 60 H | Kuraray America, Inc. | Polyvinyl butyral (PVB) grades with different molecular weights and varying degrees of acetalization. They are used as binders for coatings, printing inks, powder coatings and textile printing. They are also used as wetting agents and adhesives. | |
| MOWITAL® B 60 HH | Kuraray America, Inc. | Polyvinyl butyral (PVB) grades with different molecular weights and varying degrees of acetalization. They are used as binders for coatings, printing inks, powder coatings and textile printing. They are also used as wetting agents and adhesives. | |
| Nubirox FR-10 | Ferro Pigments | Nubirox FR-10 is a nitrite-based liquid inhibitor for preventing flash rusting of waterborne systems without negatively impacting long term anticorrosion performance of the Coating. It is effective at very low concentrations and shows activity in the vapo...weiterlesen Nubirox FR-10 is a nitrite-based liquid inhibitor for preventing flash rusting of waterborne systems without negatively impacting long term anticorrosion performance of the Coating. It is effective at very low concentrations and shows activity in the vapour and liquid phase. verkürzen | |
| SILLIKOLLOID P 87 | Hoffmann Mineral | SILLIKOLLOID P 87 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinte. Used as a functional filler either on its own or combined with other extenders or flatting agents. | |
| HALOX® 630 | ICL Phosphate Specialty | HALOX® 630 by ICL is a liquid organic corrosion inhibitor for solvent-based protective coatings on metal surfaces. It is an alkylammonium salt solution, a 70% active substance in xylene. It can be used in solvent-borne clear or pigmented coatings and in systems such as 2-pack epoxy systems, high solids epoxy esters, alkyds, acrylic resins, silicones, polyesters, and 2-pack polyurethane primer...weiterlesen HALOX® 630 by ICL is a liquid organic corrosion inhibitor for solvent-based protective coatings on metal surfaces. It is an alkylammonium salt solution, a 70% active substance in xylene. It can be used in solvent-borne clear or pigmented coatings and in systems such as 2-pack epoxy systems, high solids epoxy esters, alkyds, acrylic resins, silicones, polyesters, and 2-pack polyurethane primers. It is recommended for auto refinish, OEM, DTM, industrial and marine coatings. HALOX® 630 shows superior corrosion resistance over poorly prepared surfaces, such as adherent rust or oil contamination. The dosage level of the grade is 1-3% based on the total formula weight. It has a shelf life of 36 months. verkürzen | Request Sample |
| MOWITAL® B 30 H | Kuraray America, Inc. | Polyvinyl butyral (PVB) grades with different molecular weights and varying degrees of acetalization. They are used as binders for coatings, printing inks, powder coatings and textile printing. They are also used as wetting agents and adhesives. | |
| Nubirox 106 | Ferro Pigments | Nubirox 106 is a labeling-free, white Anticorrosive pigment. It is an Organophilized Zinc Phosphate-Molybdate that exhibits excellent performance and cost efficiency in solventborne and waterborne systems, being suitable for thin film applications (such a...weiterlesen Nubirox 106 is a labeling-free, white Anticorrosive pigment. It is an Organophilized Zinc Phosphate-Molybdate that exhibits excellent performance and cost efficiency in solventborne and waterborne systems, being suitable for thin film applications (such as Coil Coatings). verkürzen |
