| 1,9-Nonanediol Diacrylate (V-260) | Kowa American Corporation | 1,9-Nonanediol Diacrylate (V-260) is a clear to light yellow liquid. It freezes below 0°C and has a boiling point above 250°C. | |
| 2-BUTYL-2-ETHYL-1,3-PROPANEDIOL (BEPG) | KH Neochem Americas, Inc. | Intermediate for Polyurethane, Polyester and powder coating resin. | |
| 2-Ethoxyethoxyethyl Acrylate (EEEA, V-190) | Kowa American Corporation | 2-Ethoxyethoxyethyl Acrylate (EEEA, V-190) is a clear water white liquid. It has mehq and phenothiazine (PTZ) as inhibitors. | |
| 2-Ethoxyethyl Methacrylate (ETMA) | Kowa American Corporation | 2-Ethoxyethyl Methacrylate (ETMA) is a clear water white liquid. It has the viscosity range of 2 - 6 cps at 25°C. | |
| 2-Hydroxyethyl Acrylate (HEA) | Kowa American Corporation | 2-Hydroxyethyl Acrylate (HEA) is a clear water white liquid. It has a boiling point 82°C and a freezing point of below -70°C. | |
| 2-Hydroxyethyl Methacrylate (HEMA) | Kowa American Corporation | 2-Hydroxyethyl Methacrylate (HEMA) is a neutral hydrophilic monomer useful in UV curing polymer systems & durable high gloss coatings. Other industrial applications include nails, dental, hydrogels (such as contact lens), UV inks & adhesives. HEMA provide...weiterlesen 2-Hydroxyethyl Methacrylate (HEMA) is a neutral hydrophilic monomer useful in UV curing polymer systems & durable high gloss coatings. Other industrial applications include nails, dental, hydrogels (such as contact lens), UV inks & adhesives. HEMA provides scratch, solvent & weather resistance, control of hydrophobicity &/or can introduce reactive sites. verkürzen | |
| 2-Hydroxyethyl Methacrylate (HISS) | Kowa American Corporation | 2-Hydroxyethyl Methacrylate (HISS) is 0.1% water and has 10 APHA of color when shipped. | |
| 2-Hydroxypropyl Methacrylate (HPMA) | Kowa American Corporation | HPMA is a hydroxy functional monomer used to make acrylic polyols and other hydrophilic polymers. | |
| 2-Methoxyethyl Methacrylate (MTMA) | Kowa American Corporation | 2-Methoxyethyl Methacrylate (MTMA) is 0.1% water and has 20 APHA of color when shipped. | |
| 2,4-DIETHYL-1,5-PENTANEDIOL (PD-9) | KH Neochem Americas, Inc. | Intermediate for Polyurethane, Polyester etc. | |
| 3-Methacryloxypropylmethyldimethoxysilane | Dalian Onichem Co., Ltd. | 3-Methacryloxypropylmethyldimethoxysilane is a comonomer in radical cured resins, such as acrylic, polyester, methacrylate, and PVC. 3-Methacryloxypropylmethyldimethoxysilane is used as a coupling agent for reinforced and filled polyester and acrylics. | Request Sample |
| 3-Methacryloxypropyltriethoxysilane | Dalian Onichem Co., Ltd. | 3-Methacryloxypropyltriethoxysilane is a comonomer in radical cured resins, such as acrylic, polyester, methacrylate, and PVC. 3-Methacryloxypropyltriethoxysilane is a coupling agent for reinforced and filled polyester and acrylics. | Request Sample |
| Allyl Methacrylate (AMA) | Kowa American Corporation | Allyl Methacrylate (AMA) is a clear water liquid. this product is packed in 180Kg (397lb) steel drums or bulk ISO tanks. | |
| Benzyl Acrylate (BZA, V-160) | Kowa American Corporation | Benzyl Acrylate (BZA, V-160) is a clear water white liquid. It is .044% insoluble in water. | |
| Benzyl Methacrylate (BZMA) | Kowa American Corporation | Benzyl Methacrylate (BZMA) is a clear water white liquid. When shipped, it is packed in 200Kg (441lb) chemical drums. | |
| Bisomer® BDDMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® BDDMA (1,4 Butanediol Dimethacrylate) is a low viscosity, low odour dimethacrylate monomer. It is non-toxic, non-irritating and not a sensitiser. It is free of all R risk phrases and ideal in label-free systems. This product has an inhibitor (M...weiterlesen Bisomer® BDDMA (1,4 Butanediol Dimethacrylate) is a low viscosity, low odour dimethacrylate monomer. It is non-toxic, non-irritating and not a sensitiser. It is free of all R risk phrases and ideal in label-free systems. This product has an inhibitor (MEHQ) content of 300-500ppm, a colour number of 100 Pt/Co max., a total polymerisable monomers amount of 99.0% min., and a molecular weight (av) of 226g/mol. Bisomer® BDDMA is an excellent reactive diluent in UV curable wood coatings due to its low viscosity. It is ideal in peroxide cured applications such as a co-agent for PP, PE, nitrile, EPDM rubbers and PVC. It offers excellent properties with PMMA, especially in acrylic flooring and synthetic marble. Bisomer® BDDMA is used in photopolymers, wire and cable coatings, adhesives and sealants. It also offers excellent compatibility with unsaturated polyesters for gel-coats, chemical fixings and anchor bolts. verkürzen | |
| Bisomer® C13MA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® C13MA (Isotridecyl Methacrylate) is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and excellent as a flexibilising and plasticising monomer. This product has a total polymerisable monomers (mass) ...weiterlesen Bisomer® C13MA (Isotridecyl Methacrylate) is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and excellent as a flexibilising and plasticising monomer. This product has a total polymerisable monomers (mass) of > 99.0%, a molecular weight (av) of 268g/mol, and an inhibitor (MEHQ) content of 75-125ppm. It is extremely hydrophobic and offers a low Glass Transition Temperature (Tg), hence it is an excellent flexibilising co-monomer in adhesive and sealant applications. Bisomer® C13MA is a particularly useful monomer in applications such as anaerobic adhesives, vacuum impregnation sealants and high solids acrylic polyols for automotive coatings and industrial coatings. It offers a low viscosity and low odour combined with low shrinkage on polymerisation. verkürzen | |
| Bisomer® CL HEMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...weiterlesen Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. verkürzen | |
| Bisomer® DALP | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bismoer® DALP is a stable ester of high purity, capable of undergoing polymerisation at moderate temperatures to yield thermosetting or thermoplastic resins. It possesses valuable properties for adhesives, coatings, casting and potting compounds. This pro...weiterlesen Bismoer® DALP is a stable ester of high purity, capable of undergoing polymerisation at moderate temperatures to yield thermosetting or thermoplastic resins. It possesses valuable properties for adhesives, coatings, casting and potting compounds. This product has an ester of 99% min., an iodine number of 196gl^2/100g min., and a density @ 20°C of 1.115 to 1.121kg/l. It may also be copolymerised with a variety of common monomers, or used as a “reactive diluent”. When used as a partial replacement for styrene in cross-linking polyesters, Bisomer® DALP produces materials showing up to 25% less shrinkage on cure. Bisomer® DALP may also be employed in self-priming PVC organosols for steel coating or incorporated into EPDM rubber to improve the adhesive strength. verkürzen | |
| Bisomer® DEGDMA HI | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® DEGDMA HI (Diethyleneglycol Dimethacrylate) is a low viscosity aliphatic dimethacrylate monomer ideal as a co-monomer for improving hardness and mechanical properties of numerous plastics, adhesives, sealants and especially unsaturated polyesters...weiterlesen Bisomer® DEGDMA HI (Diethyleneglycol Dimethacrylate) is a low viscosity aliphatic dimethacrylate monomer ideal as a co-monomer for improving hardness and mechanical properties of numerous plastics, adhesives, sealants and especially unsaturated polyesters and acrylic polymers such as acrylic sheet and acrylic flooring. This product has a refractive index @ 20°C of 1.455-1.460, a residual solvent amount of 0.8% max., and an inhibitor (MEHQ) content of 650-850ppm. It is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is ideal in dibenzoyl peroxide (BPO) cured applications. Bisomer® DEGDMA HI is also excellent for use in the manufacture of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings, adhesives and sealants. Bisomer® DEGDMA HI offers excellent compatibility with unsaturated polyesters for chemical fixings and anchor bolts. verkürzen | |
| Bisomer® EP 100 DMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® EP 100 DMA is the dimethacrylate ester of a specifically designed block polyalkyleneglycol. Based around a 12 unit propylene oxide (PO) backbone, both ends of the chain are capped with 3 moles of ethylene oxide (EO) prior to esterification. This ...weiterlesen Bisomer® EP 100 DMA is the dimethacrylate ester of a specifically designed block polyalkyleneglycol. Based around a 12 unit propylene oxide (PO) backbone, both ends of the chain are capped with 3 moles of ethylene oxide (EO) prior to esterification. This product has a saponification value of 90-110mg KOH/g, an inhibitor (MEHQ) content of 90-120ppm, and a molecular weight (av) of 1114g/mol. Bisomer® EP100 DMA has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Other interesting applications for Bisomer® EP100 DMA include its incorporation into electronic photoresists, photopolymer printing plates, coatings in general and most notably adhesives and sealants. Low shrinkage on polymerisation and improvement in impact strength are amongst its major advantages. verkürzen | |
| Bisomer® EP 150 DMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® EP 150 DMA is a dimethacrylate ester of a specifically designed block polyalkyleneglycol which has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Based around a 7 unit propylene oxide (PO) backbone, bo...weiterlesen Bisomer® EP 150 DMA is a dimethacrylate ester of a specifically designed block polyalkyleneglycol which has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Based around a 7 unit propylene oxide (PO) backbone, both ends of the chain are capped with 2 moles of ethylene oxide (EO) prior to esterification. This product has a saponification value of 140-160mg KOH/g, an inhibitor (MEHQ) content of 70-100ppm, and a molecular weight (av) of 736g/mol. Bisomer® EP150 DMA has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Other interesting applications for Bisomer® EP150 DMA include its incorporation into electronic photoresists, photopolymer printing plates, coatings in general and most notably adhesives and sealants. Low shrinkage on polymerisation and improvement in impact strength are amongst its major advantages. verkürzen | |
| Bisomer® HEMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® HEMA (Hydroxyethyl Methacrylate) is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings, it is non-toxic and non-yellowing. This product has a diester (EGDMA) of 97.0%, an...weiterlesen Bisomer® HEMA (Hydroxyethyl Methacrylate) is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings, it is non-toxic and non-yellowing. This product has a diester (EGDMA) of 97.0%, an inhibitor (MEHQ) content of 200-240ppm, and an acid number of < 1.0mg KOH/g. It is also used as a co-monomer in styrene based unsaturated polyesters, PMMA based acrylic resins and vinyl ester formulations in anchor bolts and chemical fixings. It may also be used in the production of emulsion polymers in combination with other commodity methacrylates and acrylates, notably for textile coatings and textile sizes. Bisomer® HEMA is also the major raw material for the production of long-term wear and disposable contact lenses and in turn is an ideal starting point in formulating biomedical hydrogels. verkürzen | |
| Bisomer® HEMA HP | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...weiterlesen Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. verkürzen | |
| Bisomer® HPMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® HPMA (Hydroxypropyl Methacrylate) monomer for special polymers. Bisomer® HPMA is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings. It is non-toxic and non-yellowing. Thi...weiterlesen Bisomer® HPMA (Hydroxypropyl Methacrylate) monomer for special polymers. Bisomer® HPMA is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings. It is non-toxic and non-yellowing. This product has a molecular weight (av) 144g/mol, a diester (PGDMA) of 0.2% max., and a colour number of 10 Pt/Co max. It is also used as a co-monomer in styrene based unsaturated polyesters, PMMA based acrylic resins and vinyl ester formulations in anchor bolts and chemical fixings. Bisomer® HPMA may also be used in the production of emulsion polymers in combination with other commodity methacrylates and acrylates, notably for textile coatings and textile sizes. Bisomer® HPMA is particularly useful as a hydrophobic hydroxy monomer in the production of vacuum impregnation sealants for cast aluminium components. It is also extensively used in the production of flexible, UV curable photopolymer printing plates. verkürzen | |
| Bisomer® IDMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® IDMA is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and therefore an excellent flexibilising and plasticising monomer. It is also an excellent co-monomer in adhesive and sealant applications. Th...weiterlesen Bisomer® IDMA is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and therefore an excellent flexibilising and plasticising monomer. It is also an excellent co-monomer in adhesive and sealant applications. This product acidity (methacrylic acid) of 0.01% max., an inhibitor (MEHQ) content of 75-125ppm, and an assay (GC) of 97.0% min. Bisomer® IDMA is a useful monomer in applications such as anaerobic adhesives, vacuum impregnation sealants, high solids acrylic polyols for automotive coatings and industrial coatings. It offers low viscosity and low odour combined with low shrinkage on polymerisation. It is non-toxic, non-irritating and is not a suspected sensitiser. verkürzen | |
| Bisomer® LMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® LMA hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and is excellent as a flexibiliser and plasticiser. This product has a water content of 0.1% max., a colour number of 100 Pt/Co max., and an active ...weiterlesen Bisomer® LMA hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and is excellent as a flexibiliser and plasticiser. This product has a water content of 0.1% max., a colour number of 100 Pt/Co max., and an active monomer of 97.0%. Bisomer® LMA is based on a natural form of lauryl alcohol; as C12 lauryl methacrylate the content is around 65-70 %. Bisomer® LMA is mostly used in the automotive industry for viscosity modification of lubricating oils. However, due to its hydrophobic nature and flexibilising properties, Bisomer® LMA is also extensively used in anaerobic adhesives, vacuum impregnation of aluminium castings, sealants and pressure sensitive adhesives (PSAs). verkürzen | |
| Bisomer® MPEG 350 MA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® MPEG 350 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 8 ethylene oxide (EO) units in the chain. This product has saponific...weiterlesen Bisomer® MPEG 350 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 8 ethylene oxide (EO) units in the chain. This product has saponification value of 127-140mg KOH/g, an inhibitor (MEHQ) content of 0.45-0.55%, and a water content of 0.5% max. Bisomer® MPEG 350 MA is an excellent material to impart water solubility or water dispersibility into non-ionic organic molecules. It is also an excellent flexibilising molecule due to its low Glass Transition Temperature (Tg). Bisomer® MPEG 350 MA is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). verkürzen | |
| Bisomer® MPEG 550 MA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® MPEG 550 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. This product has a saponification value of 85-95mg KOH/g, an inhibitor (MEHQ) content of 0.15-0.20%, and a molecula...weiterlesen Bisomer® MPEG 550 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. This product has a saponification value of 85-95mg KOH/g, an inhibitor (MEHQ) content of 0.15-0.20%, and a molecular weight (av) of 628g/mol. Bisomer® MPEG 550 MA is an excellent material to impart water solubility or water dispersibility into non-ionic organic molecules. It is also an excellent flexibilising molecule due to its low Glass Transition Temperature (Tg). Bisomer® MPEG 550 MA is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). Bisomer® MPEG 550 MA is non-toxic and a liquid at ambient temperature. verkürzen | |
| Bisomer® PEG 200 DMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PEG 200 DMA (Polyethyleneglycol 200 Dimetha-crylate) is a low viscosity aliphatic dimethacrylate monomer ideally used as a co-monomer for improving mechanical properties and chemical resistance of plastics, polyolefins, adhesives, sealants, unsa...weiterlesen Bisomer® PEG 200 DMA (Polyethyleneglycol 200 Dimetha-crylate) is a low viscosity aliphatic dimethacrylate monomer ideally used as a co-monomer for improving mechanical properties and chemical resistance of plastics, polyolefins, adhesives, sealants, unsaturated polyesters and especially acrylic polymers such as acrylic sheet and acrylic flooring. This product has an inhibitor (MEHQ) content of 300-500 ppm, an active monomer of 99.0%, and a molecular weight (ac) of 338g/mol. Bisomer® PEG 200 DMA is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is non-toxic, non-sensitising and a non-irritant. It is ideal in dibenzoyl peroxide (BPO) cured applications. Bisomer® PEG 200 DMA is also excellent for use in the production of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings and is also an essential component in many anaerobic adhesives and sealants. Bisomer® PEG 200 DMA offers excellent compatibility with unsaturated polyesters for chemical fixings and anchor bolts. verkürzen | |
| Bisomer® PEM6 LD | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PEM6 LD is based on ethylene oxide, is water soluble and contains a primary hydroxyl group. It is non-toxic and has an EINECS “Polymer” classification. It has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties wh...weiterlesen Bisomer® PEM6 LD is based on ethylene oxide, is water soluble and contains a primary hydroxyl group. It is non-toxic and has an EINECS “Polymer” classification. It has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers. This product has a hydroxul value of 145-165mg KOH/g, a molecular weigh (av) of 350g/mol, and an inhibitor (MEHQ) content of 500-800ppm. Bisomer® PEM6 LD is ideal in the preparation of hydrogels, wood impregnants, soil stabilisers and polyurethane dispersions (PUDs). It is also used extensively in the manufacture of more traditional acrylic polyols and urethane methacrylate oligomers for use in photo imaging applications such as printed circuit boards (PCBs) and dry film resists (DFRs). verkürzen | |
| Bisomer® PPA 6 | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has a...weiterlesen Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has an acid numer of < 0.3mg KOH/g, a saponification value of 126-138mg KOH/g, a volatile components pf 0.5% max., and a molecular weight of 420g/mol. Bisomer® PPA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. This product is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and polyurethane dispersions (PUDs). It is also used in more traditional acrylic polyols for surface coatings. verkürzen | |
| Bisomer® PPM5 LI | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PPM5 LI (Polypropyleneglycol Monomethacrylate) is a firmly established capping agent in urethane methacrylate oligomers for the production of photopolymer printing plates and dry film resists. This product has a hydroxyl number of 145-160mg KOH/g...weiterlesen Bisomer® PPM5 LI (Polypropyleneglycol Monomethacrylate) is a firmly established capping agent in urethane methacrylate oligomers for the production of photopolymer printing plates and dry film resists. This product has a hydroxyl number of 145-160mg KOH/g, a molecular weight (av) of 376g/mol, and an inhibitor (MEHQ) content of 300-500ppm. Bisomer PPM5 LI shows excellent properties in acrylic polyols for automotive OEM and refinish applications, especially flexibility and weathering properties. It is hydrophobic and offers a low Glass Transition Temperature (Tg) and low shrinkage on polymerisation. It is an excellent component in anaerobic adhesives, vacuum impregnation of aluminium castings and general sealants. This product is also a useful co-monomer in the production of vinyl, acrylic and styrene acrylic decorative paints. verkürzen | |
| Bisomer® TEGDMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® TEGDMA is a low viscosity aliphatic dimethacrylate monomer that is ideal as a co-monomer for improving hardness and mechanical properties in plastics, polyolefins, adhesives and sealants. It is especially used to improve mechanical properties of ...weiterlesen Bisomer® TEGDMA is a low viscosity aliphatic dimethacrylate monomer that is ideal as a co-monomer for improving hardness and mechanical properties in plastics, polyolefins, adhesives and sealants. It is especially used to improve mechanical properties of unsaturated polyesters and acrylic polymers such as acrylic sheet and acrylic flooring. This product has a total polymerisable monomers of 99% min., a molecular weight (av) of 286g/mol, and an inhibitor (MEHQ) content of 250-400ppm. Bisomer® TEGDMA is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is non-toxic, non-sensitising and non-irritating. It is ideal in dibenzoyl peroxide (BPO) cured applications and excellent for use in the production of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings, adhesives and sealants. Bisomer® TEGDMA offers excellent compatibility with unsaturated polyesters for chemical fixings and anchor bolts. verkürzen | |
| CD406 | Sartomer Americas | CD406 is a difunctional cycloaliphatic acrylate monomer that offers fast cure rates and produces hard, durable coatings with good clarity and adhesion to diverse substrates. CD406 is recommended for window films, polycarbonate coatings, solder masks, wood...weiterlesen CD406 is a difunctional cycloaliphatic acrylate monomer that offers fast cure rates and produces hard, durable coatings with good clarity and adhesion to diverse substrates. CD406 is recommended for window films, polycarbonate coatings, solder masks, wood, plastic, and paper coatings, dry film photo imaging, and metallized surface coating. verkürzen | |
| CD421A | Sartomer Americas | CD421A is a low viscosity, monofunctional methacrylate monomer containing a light stable cyclic group. It is a lower volatility, lower odor alternative to cyclohexyl methacrylate. It has excellent solvency characteristics and good adhesion to a var...weiterlesen CD421A is a low viscosity, monofunctional methacrylate monomer containing a light stable cyclic group. It is a lower volatility, lower odor alternative to cyclohexyl methacrylate. It has excellent solvency characteristics and good adhesion to a variety of substrates. CD421A has improved thermal stability, good chemical resistance, good hardness, good heat resistance, good water resistance, good weatherability, high abrasion resistance, high Impact Strength and Low shrinkage. Suggested applications are anaerobic adhesives, structural adhesives, anchor bolt adhesives, plastics, industrial coatings. verkürzen | |
| CD535 | Sartomer Americas | CD535 is a low viscosity cyclic monofunctional methacrylate monomer that is used in a variety of free radical peroxide or azonitrile cure applications, including polymer synthesis, coatings, adhesives, sealants and polymer modification. CD535 is a high Tg...weiterlesen CD535 is a low viscosity cyclic monofunctional methacrylate monomer that is used in a variety of free radical peroxide or azonitrile cure applications, including polymer synthesis, coatings, adhesives, sealants and polymer modification. CD535 is a high Tg, hard, low shrinkage monomer that provides good surface cure in thin film applications.This product has dual cure crosslinking capability, high strength and surface cure. Suggested applications include metal, plastic, and concrete coatings and sealants. verkürzen | |
| CD542 | Sartomer Americas | CD542 is a low volatility monomer used in free radical polymerization. Provides a good hydrophobic and hydrophilic balance. CD542 is a hydrophobic backbone for alkali solubility with low odor. Suggested applications include adhesives, coatings, solder ma...weiterlesen CD542 is a low volatility monomer used in free radical polymerization. Provides a good hydrophobic and hydrophilic balance. CD542 is a hydrophobic backbone for alkali solubility with low odor. Suggested applications include adhesives, coatings, solder masks, electronics, photoresists electronics and photopolymers. verkürzen | |
| CD545 | Sartomer Americas | CD545 is a diethylene glycol methyl ether methacrylate. It is a monofunctional monomer that is suited to peroxide-cured coatings, adhesives, sealants, and emulsion or solution acrylics. CD545 has good adhesion, high flexibility and low shrinkage. Suggeste...weiterlesen CD545 is a diethylene glycol methyl ether methacrylate. It is a monofunctional monomer that is suited to peroxide-cured coatings, adhesives, sealants, and emulsion or solution acrylics. CD545 has good adhesion, high flexibility and low shrinkage. Suggested applications include acrylics, adhesives, emulsion systems, peroxide-cured coatings, and sealants. verkürzen | |
| CD552 | Sartomer Americas | CD552 is a monofunctional methoxylated PEG (550) methacrylate monomer that features excellent wetting, water solubility, low Tg, and fast surface cure. It is recommended as a versatile chemical intermediate for coatings and polymer modification. Suggested...weiterlesen CD552 is a monofunctional methoxylated PEG (550) methacrylate monomer that features excellent wetting, water solubility, low Tg, and fast surface cure. It is recommended as a versatile chemical intermediate for coatings and polymer modification. Suggested applications include Chemical intermediates and polymer modification. verkürzen | |
| CD553 | Sartomer Americas | CD553 is a monofunctional methoxylated PEG (550) acrylate monomer that features excellent wetting, high flexibility, low Tg, and fast surface cure. Suggested applications include chemical intermediates and polymer modification. | |
| CD561 | Sartomer Americas | CD-561 is an alkoxylated hexane diol diacrylate monomer which offers reduced skin irritation, excellent flexibility, and improved compatibility with epoxy and urethane-based coating systems. CD-561 provides good adhesion, good weatherability and low shri...weiterlesen CD-561 is an alkoxylated hexane diol diacrylate monomer which offers reduced skin irritation, excellent flexibility, and improved compatibility with epoxy and urethane-based coating systems. CD-561 provides good adhesion, good weatherability and low shrinkage. Suggested Applications are coatings, floor and metal coatings, electronics, Inks, jet and screen inks. verkürzen | |
| CD563 | Sartomer Americas | CD563 is an alkoxylated hexanediol diacrylate monomer that offers reduced skin irritation and improved flexibility over hexanediol diacrylate. CD563 has a fast cure response, low volatility and pigment wetting. This product has good chemical and water res...weiterlesen CD563 is an alkoxylated hexanediol diacrylate monomer that offers reduced skin irritation and improved flexibility over hexanediol diacrylate. CD563 has a fast cure response, low volatility and pigment wetting. This product has good chemical and water resistance, high impact strength, adhesion and low shrinkage. Suggested applications are coatings, electronics and inks. verkürzen | |
| CD564 | Sartomer Americas | CD-564 is an alkoxylated hexane diol diacrylate monomer which offers reduced skin irritation and high utility in printing and coating applications. CD-564 has good adhesion, good weatherability and low shrinkage. Suggested applications include coatings, ...weiterlesen CD-564 is an alkoxylated hexane diol diacrylate monomer which offers reduced skin irritation and high utility in printing and coating applications. CD-564 has good adhesion, good weatherability and low shrinkage. Suggested applications include coatings, floor and metal coatings, electronics, jet and screen inks. verkürzen | |
| CD590 | Sartomer Americas | CD590 is a monomer that possesses a high liquid refractive index and flexibility. The monomer is suited for applications where refractive index matching, adhesion, and flexibility are required. | |
| CD595 | Sartomer Americas | CD595 is a clear liquid acrylate monomer that exhibits low odor and high reactivity. CD595 is useful in applications, such as coatings and digital and screen inks where outdoor weathering resistance is needed. This product's performance properties are adh...weiterlesen CD595 is a clear liquid acrylate monomer that exhibits low odor and high reactivity. CD595 is useful in applications, such as coatings and digital and screen inks where outdoor weathering resistance is needed. This product's performance properties are adhesion, good chemical resistance, good water resistance, high impact strength and low shrinkage. verkürzen | |
| CD730 | Sartomer Americas | CD730 is a triethylene glycol ethyl ether methacrylate monofunctional monomer developed for peroxide-cured coatings, adhesives, sealants, and emulsion or solution acrylics. Performance properties include good adhesion, high flexibility, high impact streng...weiterlesen CD730 is a triethylene glycol ethyl ether methacrylate monofunctional monomer developed for peroxide-cured coatings, adhesives, sealants, and emulsion or solution acrylics. Performance properties include good adhesion, high flexibility, high impact strength, and low shrinkage. verkürzen | |
| CD9043 | Sartomer Americas | CD9043 is an alkoxylated neopentyl glycol diacrylate monomer. CD9043 demonstrates good pigment wetting, solvent resistance and flexibility in radiation curable ink and coating applications. CD9043 is particularly suited to plastic substrates. Performance ...weiterlesen CD9043 is an alkoxylated neopentyl glycol diacrylate monomer. CD9043 demonstrates good pigment wetting, solvent resistance and flexibility in radiation curable ink and coating applications. CD9043 is particularly suited to plastic substrates. Performance properties for this product include adhesion, flexibility and weatherability. Suggested applications are coatings, plastic, and inks. verkürzen | |
| CD9055 | Sartomer Americas | CD9055 is an acidic acrylate that will promote adhesion to a number of different substrates, including metal and glass. It does not contain any (meth)acrylate monomers, thus giving formulators more latitude in use. The product should not be used in formul...weiterlesen CD9055 is an acidic acrylate that will promote adhesion to a number of different substrates, including metal and glass. It does not contain any (meth)acrylate monomers, thus giving formulators more latitude in use. The product should not be used in formulations with amines. CD9055 has good weatherability and low shrinkage that can be used for laminating and pressure sensitive adhesives, wood, plastic, and metal coatings, as well as flexo, letterpress, offset, and rotary screen inks. verkürzen | |
| CD9075 | Sartomer Americas | CD9075 is an alkoxylated lauryl acrylate monomer. CD9075 demonstrates good pigment wetting, flexibility, and cure speed in radiation curable ink, coating, and adhesive applications. CD9075 is particularly suited to plastic substrates. Performance properti...weiterlesen CD9075 is an alkoxylated lauryl acrylate monomer. CD9075 demonstrates good pigment wetting, flexibility, and cure speed in radiation curable ink, coating, and adhesive applications. CD9075 is particularly suited to plastic substrates. Performance properties for this product are adhesion and flexibility. Suggested applications include adhesives, laminating adhesives, pressure sensitive coatings, plastic and inks. verkürzen | |
| CN152 | Sartomer Americas | CN152 is a low viscosity aliphatic monoacrylate oligomer. CN152 has good flexibility and offers excellent adhesion. It is particularly suited to pigmented coatings and adhesives. | |
| CN2261 | Sartomer Americas | CN2261 is a polyester acrylate oligomer. CN2261 was developed for UV curable wood and floor coating applications, where hardness and abrasion resistance are required. CN2261 demonstrates excellent cure rates. | |
| CN2603 | Sartomer Americas | CN2603 is a high refractive index, halogen-free oligomer developed for UV/EB-cured applications. This product imparts a fast cure response, hardness and solvent resistance. Suggested applications for CN2603 are high refractive index, optical, plastic and ...weiterlesen CN2603 is a high refractive index, halogen-free oligomer developed for UV/EB-cured applications. This product imparts a fast cure response, hardness and solvent resistance. Suggested applications for CN2603 are high refractive index, optical, plastic and wood coatings, electronics and solder masks. verkürzen | |
| Cyclohexyl Acrylate (CHA, V-155) | Kowa American Corporation | Cyclohexyl Acrylate (CHA, V-155) is a clear water white liquid. When shipped, it is packed in 180 Kg (397lb) steel drums. | |
| Cyclohexyl Methacrylate (CHMA) | Kowa American Corporation | Cyclohexyl Methacrylate (CHMA) is a clear water white liquid. It is insoluble in water. | |
| DIACETONE ACRYLAMIDE (DAAM) | KH Neochem Americas, Inc. | Monomer for self-crosslinking emulsion resin for coatings, adhesive and textiles. | |
| Dimethylaminoethyl Methacrylate (DMMA) | Kowa American Corporation | Dimethylaminoethyl Methacrylate (DMMA) is a Mitsubishi Rayon methacrylate functional monomer. | |
| DMPA® Dimethylolpropionic Acid | GEO Specialty Chemicals, Inc.TRIMET Products Group | DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of wat...weiterlesen DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of water soluble resins. This product has a neutralization equivalent of 141.0 max., a decomposition temperature of 230°C, and a water insolubles amount of 50.0ppm max. The neopentyl structure of this trifunctional compound, having two primary hydroxyl groups and one tertiary carboxylic group, permits simplified processing by allowing the combining of all reactants in a single kettle charge. Good control of the reaction is possible due to the slower esterification rate of the tertiary carboxyl, assuring a uniform distribution of carboxyl groups along the resin backbone. The free acid group actively promotes resin water solubility or water dispersibility after neutralization with a base, easily introduces a polar group to improve coating adhesion and synthetic fiber dye receptivity, and increases the alkali solubility of deposited films. verkürzen | |
| Dynasylan® MEMO | Evonik Operations GmbH, BL Silanes | Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic h...weiterlesen Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons. verkürzen | |
| Ethylene Glycol Dimethacrylate (EDMA) | Kowa American Corporation | Ethylene Glycol Dimethacrylate (EDMA) is a clear water white liquid. It is 0.18% soluble in water and 0.70% in water in EDMA. | |
| GENIOSIL® GF 56 | Wacker Chemical Corporation | GENIOSIL® GF 56 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristically aromatic odor. GENIOSIL® GF 56 is used in the production of silane-modified polymers that serve as binders in paints and adhesives. It can applied in adhesiv...weiterlesen GENIOSIL® GF 56 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristically aromatic odor. GENIOSIL® GF 56 is used in the production of silane-modified polymers that serve as binders in paints and adhesives. It can applied in adhesives, emulsion paint, coatings and plastics crosslinking. verkürzen | |
| GENIOSIL® XL 10 | Wacker Chemical Corporation | GENIOSIL® XL 10 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristic odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. It ca...weiterlesen GENIOSIL® XL 10 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristic odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. It can be applied in adhesives, all-purpose adhesives, assembly adhesives, coatings, construction adhesives, emulsion paint, industrial adhesives, parquet adhesives and plastics crosslinking. verkürzen | |
| GENIOSIL® XL 12 | Wacker Chemical Corporation | GENIOSIL® XL 12 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristic odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. GENIO...weiterlesen GENIOSIL® XL 12 is an alkoxyvinylsilane. It´s a clear, colorless liquid with a characteristic odor. The silane hydrolyzes in the presence of moisture (methanol is released) to form silanols, which can then react with themselves to produce siloxanes. GENIOSIL® XL 12 is an unsaturated organic compound and can be incorporated into organic polymers by radical grafting or co-polymerization. It can be applied in adhesives, emulsion paint, coatings and plastics crosslinking. verkürzen | |
| Glycidyl Methacrylate (GMA) | Kowa American Corporation | Glycidyl Methacrylate (GMA) is a clear water white liquid. It has a 2.53 cps viscosity at 28°C. | |
| Harcryl® 1228 | Harcros Chemicals, Inc. | Harcryl® 1228 is a unique, functional, acrylic monomer consisting of mono- and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows Harcryl® 1228 to be easily incorporated into a variety of polymer system...weiterlesen Harcryl® 1228 is a unique, functional, acrylic monomer consisting of mono- and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows Harcryl® 1228 to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 provides for application in hydrophilic formulations as well. The primary use area for Harcryl® 1228 is emulsion polymerization. The phosphate functional group promotesadhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 to easily incorporate into many coating systems. verkürzen | |
| Harcryl® 1228 M | Harcros Chemicals, Inc. | Harcryl® 1228 M is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) The product is inhibited with 400 ppm of added hydroquinone. Harcryl® 1228 M is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorpor...weiterlesen Harcryl® 1228 M is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) The product is inhibited with 400 ppm of added hydroquinone. Harcryl® 1228 M is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M more hydrophilic than Harcryl® 1228. The main application for Harcryl® 1228M is emulsion polymerization. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 M to be easily incorporated into many coating systems. verkürzen | |
| Harcryl® 1228 M UV | Harcros Chemicals, Inc. | Harcryl® 1228 M UV is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) Harcryl® 1228 M UV is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mo...weiterlesen Harcryl® 1228 M UV is a free acid phosphate ester of 2-HEMA (hydroxyethylmethacrylate.) Harcryl® 1228 M UV is predominatly composed of the mono-alkyl phosphate ester, allowing it to be easily incorporated into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M UV more hydrophilic than Harcryl® 1228. Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 M UV to be easily incorporated into many coating systems. including UV & Radiation curable coatings. verkürzen | |
| Harcryl® 1228 UV | Harcros Chemicals, Inc. | Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The po...weiterlesen Harcryl® 1228 UV is a unique, functional, acrylic monomer consisting of mono and di-phosphate esters of 2-Hydroxyethylmethacrylate. The ratio of mono-alkyl to di-alkyl phosphate allows it to be easily incorporated into a variety of polymer systems. The polarity of Harcryl® 1228 UV provides for application in hydrophilic formulations as well. The main application for Harcryl® 1228 UV is UV curable coatings. The phosphate functional group promotes adhesion to a variety of surfaces, reducing the need for pretreatments. Improving adhesion saves time and reduces layers from the coating process. Improved corrosion resistance due to the phosphate functional group reduces the need for additional inhibitors. The acrylic backbone allows Harcryl® 1228 UV to easily incorporate into many coating systems including UV & Radiation curable coatings. verkürzen | |
| HS9630 | Tianyi Chemical Engineering Material Co., Ltd. | HS9630, in the form of a transparent liquid, is a reactive monomer resin that can be used in paints, inks, and as a binder in adhesives. This product shows good weather resistance and adhesion to plastics. If one increases the number of acrylate or meth...weiterlesen HS9630, in the form of a transparent liquid, is a reactive monomer resin that can be used in paints, inks, and as a binder in adhesives. This product shows good weather resistance and adhesion to plastics. If one increases the number of acrylate or methacrylic ester optical activity groups, one will increase its cure rate with high rigidity and good dilution effects. verkürzen | |
| Isobornyl Acrylate (IBXA) | Kowa American Corporation | Isobornyl Acrylate (IBXA) is a clear water white liquid. It has a 7.6 cps viscosity at 28°C. | |
| Isobornyl Methacrylate (IBXMA) | Kowa American Corporation | Isobornyl Methacrylate (IBXMA) is a clear water white liquid. It is insoluble in water. | |
| M-CURE® 100 | Sartomer Americas | M-CURE® 100 is an aromatic acrylate monomer designed to reduce the viscosity of amine cured epoxy coatings without significantly affecting coating hardness and chemical resistance, or significantly reducing reactivity. M-CURE® 100 also has excellent wetti...weiterlesen M-CURE® 100 is an aromatic acrylate monomer designed to reduce the viscosity of amine cured epoxy coatings without significantly affecting coating hardness and chemical resistance, or significantly reducing reactivity. M-CURE® 100 also has excellent wetting properties. Suggested applications include: adhesives, concrete coatings and sealants, concrete grouts and mortars and polymer, and sealants. verkürzen | |
| M-CURE® 201 | Sartomer Americas | M-CURE® 201 is an aliphatic acrylate monomer that gives excellent viscosity reduction and light fastness. M-CURE® 201 also exhibits good cold temperature cure properties. Suggested applications include: adhesives and concrete, grouts & mortars. | |
| M-CURE® 203 | Sartomer Americas | M-CURE® 203 is an aromatic urethane acrylate designed to improve the flexibility and toughness of epoxy/amine cured coatings. Cured epoxy coatings containing M-CURE® 203 will have improved elongation properties, moderate tensile strengths, and improved ab...weiterlesen M-CURE® 203 is an aromatic urethane acrylate designed to improve the flexibility and toughness of epoxy/amine cured coatings. Cured epoxy coatings containing M-CURE® 203 will have improved elongation properties, moderate tensile strengths, and improved abrasion properties. Adhesives, coatings, floor and metal coatings and sealants are the recommended uses for this product. verkürzen | |
| M-CURE® 300 | Sartomer Americas | M-CURE® 300 is an aliphatic acrylate monomer designed for applications requiring fast cure rate, excellent chemical resistance and good heat distortion properties. M-CURE® 300 also offers very good cold temperature curing without amine blush. Suggested ap...weiterlesen M-CURE® 300 is an aliphatic acrylate monomer designed for applications requiring fast cure rate, excellent chemical resistance and good heat distortion properties. M-CURE® 300 also offers very good cold temperature curing without amine blush. Suggested applications include: floor coatings and paints, traffic striping. verkürzen | |
| M-CURE® 400 | Sartomer Americas | M-CURE® 400 is an aliphatic acrylate monomer that is designed for applications where extremely fast cure rates are required, particularly at cold temperatures. Due to the extremely fast reactivity at room temperatures, pot life is dramatically reduced. Su...weiterlesen M-CURE® 400 is an aliphatic acrylate monomer that is designed for applications where extremely fast cure rates are required, particularly at cold temperatures. Due to the extremely fast reactivity at room temperatures, pot life is dramatically reduced. Suggested applications include: adhesives, floor coatings, and paints, traffic striping. verkürzen | |
| Phenoxyethyl Acrylate (PEA, V-192) | Kowa American Corporation | Phenoxyethyl Acrylate (PEA, V-192) is a clear water white liquid. When shipped in 200Kg (441lb) net wt. steel drums. | |
| Pripol™ 2033 - Polyester Polyol (Amorphous) | Cargill Industrial Specialties | Pripol™ 2033 is a fully amorphous dimer diol for polyurethanes and polyesters. It offers extremely high chemical and hydrolysis resistance. | |
| Rapi-Cure™ DVE-3 | Ashland Specialty Ingredients | Rapi-Cure™ DVE-3 is a triethyleneglycol divinyl ether. Product attributes are physical state as supplied clear liquid, CAS No 765-12-8, viscosity cps at 25 Deg C 2.6, nominal molecular weight 202, BP Deg C 123 @18 mm, MP/FP or PP Deg C -7, flash Pt Deg C...weiterlesen Rapi-Cure™ DVE-3 is a triethyleneglycol divinyl ether. Product attributes are physical state as supplied clear liquid, CAS No 765-12-8, viscosity cps at 25 Deg C 2.6, nominal molecular weight 202, BP Deg C 123 @18 mm, MP/FP or PP Deg C -7, flash Pt Deg C 119, specific gravity 22-25 Deg C 1.001. verkürzen | |
| Rapi-Cure™ HBVE | Ashland Specialty Ingredients | Rapi-Cure™ HBVE is a Hydroxybutyl vinyl ether. Stabilized with 0.01% KOH. Product attributes include physical state as supplied clear liquid, CAS No 17832-28-9, viscosity cps at 25 Deg C 5.4, nominal molecular weight 116, BP Deg C 95 @20, MP/FP or PP Deg ...weiterlesen Rapi-Cure™ HBVE is a Hydroxybutyl vinyl ether. Stabilized with 0.01% KOH. Product attributes include physical state as supplied clear liquid, CAS No 17832-28-9, viscosity cps at 25 Deg C 5.4, nominal molecular weight 116, BP Deg C 95 @20, MP/FP or PP Deg C -39, flash pt deg C 82, specific gravity 22-25 Deg C 0.939. verkürzen | |
| SARBIO® 5100 Resin | Sartomer Americas | SARBIO® 5100 Resin is a low viscosity, polar, monofunctional monomer that promotes adhesion to challenging substrates. It exhibits good adhesion and chemical resistance. | |
| SARBIO® 5102 Resin | Sartomer Americas | SARBIO® 5102 Resin is an excellent reactive diluent for oligomers. The chemistry produces polymers through free radical curing that have a high glass transition temperature. It exhibits good adhesion and chemical resistance. | |
| SARBIO® 5103 Resin | Sartomer Americas | SARBIO® 5103 Resin is an alkoxylated acrylate monomer that offers excellent adhesion to plastics, particularly PVC and polycarbonate. SARBIO® 5103 monomer demonstrates good pigment wetting in screen and offset printing systems. It is also effective in pro...weiterlesen SARBIO® 5103 Resin is an alkoxylated acrylate monomer that offers excellent adhesion to plastics, particularly PVC and polycarbonate. SARBIO® 5103 monomer demonstrates good pigment wetting in screen and offset printing systems. It is also effective in promoting intercoat adhesion. It exhibits good adhesion and chemical resistance. verkürzen | |
| SARBIO® 5201 Resin | Sartomer Americas | SARBIO® 5201 Resin is an acrylate monomer that exhibits low odor and high reactivity. It is useful in applications, such as coatings and digital and screen inks, and where weathering resistance is needed. It exhibits good adhesion and chemical resistance. | |
| SARBIO® 6100 Resin | Sartomer Americas | SARBIO® 6100 Resin is a low viscosity, polar monofunctional monomer that promotes adhesion to numerous substrates. It exhibits good adhesion and chemical resistance. | |
| SARBIO® 6101 Resin | Sartomer Americas | SARBIO® 6101 Resin is a low volatility monofunctional monomer with a hydrophobic backbone. It exhibits good adhesion and water resistance. | |
| SARBIO® 6102 Resin | Sartomer Americas | SARBIO® 6102 Resin is an excellent reactive diluent for oligomers. It produces polymers through free radical curing that have a high glass transition temperature. It exhibits good adhesion and chemical resistance. | |
| SARBIO® 6200 Resin | Sartomer Americas | SARBIO® 6200 Resin is a difunctional monomer offering good stain resistance and solvency. It exhibits good adhesion and chemical resistance. | |
| Saret® SR500 | Sartomer Americas | Saret® SR500 coagent is a trifunctional, low color, low staining, scorch retarding aid which contains nitroso inhibitor packages. This product improves mechanical and performance properties when incorporated into peroxide cure natural and synthetic rubber...weiterlesen Saret® SR500 coagent is a trifunctional, low color, low staining, scorch retarding aid which contains nitroso inhibitor packages. This product improves mechanical and performance properties when incorporated into peroxide cure natural and synthetic rubber systems. Saret® SR500 offers good hardness and high modulus. It has a low mooney viscosity and a low compression set. Suggested applications of this product are for rubber and plastics, elastomers for rubber and plastics, and sealants. verkürzen | |
| Saret SR521 | Sartomer Americas | Saret 521 coagent is a difunctional, low color, low staining, scorch retarding aid which contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the products improves mechanical and performance p...weiterlesen Saret 521 coagent is a difunctional, low color, low staining, scorch retarding aid which contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the products improves mechanical and performance properties. verkürzen | |
| SILQUEST® A-2120 | Momentive Performance Materials | Diaminofunctional silane used for many applications. Used to promote adhesion of amino-reactive resins to inorganic and plastic surfaces and inorganic fillers or reinforcements. | |
| SR-205 | Sartomer Americas | SR-205 is a high boiling monomer with low vapor pressure which is used in free radical polymerization. Suggested applications include: acrylics, paints, anaerobic adhesives, elastomers; sealants, solder masks; photoresists; photopolymers, plastic and pape...weiterlesen SR-205 is a high boiling monomer with low vapor pressure which is used in free radical polymerization. Suggested applications include: acrylics, paints, anaerobic adhesives, elastomers; sealants, solder masks; photoresists; photopolymers, plastic and paper coatings. verkürzen | |
| SR-206 | Sartomer Americas | SR-206 is a colorless, high boiling difunctional monomer for use in free radical polymerization. It's performance properties include: weatherability, chemical and water resistance, hardness, heat resistance and abrasion resistance. Suggested applications ...weiterlesen SR-206 is a colorless, high boiling difunctional monomer for use in free radical polymerization. It's performance properties include: weatherability, chemical and water resistance, hardness, heat resistance and abrasion resistance. Suggested applications include: acrylics, plastics, elastomers, adhesives, plastic coatings, electronics and microencapsulant emulsion coatings. verkürzen | |
| SR-214 | Sartomer Americas | SR-214 is a low viscosity, difunctional monomer offering high solvency. Suggested applications include: plastics, elastomers, photoresists electronics, photopolymers, and polymer concrete. | |
| SR-231 | Sartomer Americas | SR-231 is a high boiling monomer with low vapor pressure that is used in free radical polymerization. Suggested applications include: adhesives, sealants, coatings, solder masks, electronics photoresists and photopolymers. | |
| SR-239 | Sartomer Americas | SR-239 is a low viscosity, fast curing monomer with a low volatility, hydrophobic backbone, and good solvency for use in free radical polymerization. Suggested applications include: acrylics, adhesives and sealants, wood coatings, elastomers, photoresists...weiterlesen SR-239 is a low viscosity, fast curing monomer with a low volatility, hydrophobic backbone, and good solvency for use in free radical polymerization. Suggested applications include: acrylics, adhesives and sealants, wood coatings, elastomers, photoresists and photopolymers electronics, encapsulants, and alkyd coatings. verkürzen | |
| SR-297 | Sartomer Americas | SR-297, 1,3-butylene glycol dimethacrylate, a difunctional monomer offering good stain resistance and solvency. Suggested applications include: acrylics, adhesives, sealants, coatings, concrete polymers, elastomers, photoresists electronics, plastics, and...weiterlesen SR-297, 1,3-butylene glycol dimethacrylate, a difunctional monomer offering good stain resistance and solvency. Suggested applications include: acrylics, adhesives, sealants, coatings, concrete polymers, elastomers, photoresists electronics, plastics, and plastisols. verkürzen | |
| SR-348 | Sartomer Americas | SR-348, 2-mole ethoxylated bisphenol A dimethacrylate, is a low volatility monomer used in free radical polymerization. Performance properties include: chemical and water resistance, adhesion, low shrinkage, hardness and abrasion resistance, heat resista...weiterlesen SR-348, 2-mole ethoxylated bisphenol A dimethacrylate, is a low volatility monomer used in free radical polymerization. Performance properties include: chemical and water resistance, adhesion, low shrinkage, hardness and abrasion resistance, heat resistance and impact strength. Suggested application includes: coatings, plastisols, sealants, anaerobic adhesives, elastomers, photoresists electronics, photopolymers, flexo and gravure inks and polymer concrete. verkürzen | |
| SR101 | Sartomer Americas | SR101 is a low volatility monomer used in free radical polymerization. Performance properties include: abrasion resistance, adhesion, chemical resistance, hardness, heat resistance, impact strength, low shrinkage and water resistance. Suggested applicatio...weiterlesen SR101 is a low volatility monomer used in free radical polymerization. Performance properties include: abrasion resistance, adhesion, chemical resistance, hardness, heat resistance, impact strength, low shrinkage and water resistance. Suggested applications include: anaerobic adhesives, coatings, photresists electronics and flex & gravure Inks, plastisols, sealants and concrete, polymer. verkürzen | |
| SR150 | Sartomer Americas | SR150 is an ethoxylated bisphenol A dimethacrylate, is a low volatility monomer used in free radical polymerization. It provides a good hydrophobic and hydrophilic balance. Suggested applications include: anaerobic, adhesives; elastomers; coatings, concre...weiterlesen SR150 is an ethoxylated bisphenol A dimethacrylate, is a low volatility monomer used in free radical polymerization. It provides a good hydrophobic and hydrophilic balance. Suggested applications include: anaerobic, adhesives; elastomers; coatings, concrete polymers; dental polymers, photoresists electronics; photopolymer, flexo and gravure inks, plastisols, sealants, and optical. verkürzen |
