| Ceridust® 3715 | Clariant Plastics & Coatings Ltd. | Ceridust® 3715 is a micronized, polar modified polyethylene wax recommended for solvent and water based coatings and inks. | |
| Pigment Violet 3 (Corimax Violet SW) | ZEYA Chemicals (Haimen) Co., Ltd. | Pigment Violet 3 (Corimax Violet SW) is a triphenylmethane violet pigment. It is recommended for water-based inks. | |
| ImerPrint™ 02K | Imerys Kaolin | ImerPrint™ 02K is a pulverised ultrafine hydrous kaolin for use in both water-based and solvent-based inks. | |
| ADDITOL® XW 395 | Allnex | Additol® XW 395 is a levelling, wetting and antifloating agent, for waterborne paint systems. | Request Sample |
| ORDISOL SWT-04 | Concentrol, S.A., Productos | ORDISOL SWT-04 is a silicone based additive for waterborne formulations of finishing auxiliaries. | |
| Nubicoat HWR Resin-Free Universal Concentrate at 55% with BYK-Chemie Additives | Ferro Pigments | This is a pigment concentrate of encapsulated Ultramarine Blue for solvent and waterbased paints. | |
| Nubicoat HWR Resin-Free Universal Concentrate at 55% with Lubrizol Additives | Ferro Pigments | This is a pigment concentrate of encapsulated Ultramarine Blue for solvent and waterbased paints. | |
| Induprint SE 245 | Indulor Chemie GmbH | Induprint SE 245 is a soft emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has excellent water resistance, high gloss, excellent pigment wetting, and good adhesion on films. Induprint SE 245 is used in wa...weiterlesen Induprint SE 245 is a soft emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has excellent water resistance, high gloss, excellent pigment wetting, and good adhesion on films. Induprint SE 245 is used in water-based overprint varnishes and water-based flexographic and gravure-printing inks. verkürzen | |
| Induprint SE 290 | Indulor Chemie GmbH | Induprint SE 290 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has very high alkali resistance, excellent water resistance, high gloss, and excellent pigment wetting properties. Induprint SE 290 i...weiterlesen Induprint SE 290 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has very high alkali resistance, excellent water resistance, high gloss, and excellent pigment wetting properties. Induprint SE 290 is used in water-based overprint varnishes and water-based flexographic and gravure-printing inks verkürzen | |
| Induprint SE 8760 | Indulor Chemie GmbH | Induprint SE 8760 is an ammoniacal resin solution. It is a let-down vehicle and binder. This product has good block resistance, excellent gloss after calendering, excellent release properties, good resolubilitiy, and excellent transfer. Induprint SE 8760i...weiterlesen Induprint SE 8760 is an ammoniacal resin solution. It is a let-down vehicle and binder. This product has good block resistance, excellent gloss after calendering, excellent release properties, good resolubilitiy, and excellent transfer. Induprint SE 8760is used in water-based overprint varnishes, endless press/calendering varnishes, and water-based flexographic and gravure-printing inks. verkürzen | |
| Induprint SE 900 | Indulor Chemie GmbH | Induprint SE 900 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has high heat resistance, excellent gloss, and is free of glycols or glycol ethers. Induprint SE 900 is used in water-based flexograp...weiterlesen Induprint SE 900 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has high heat resistance, excellent gloss, and is free of glycols or glycol ethers. Induprint SE 900 is used in water-based flexographic and gravure-printing inks and water-based overprint varnishes. verkürzen | |
| Induprint SE 9035 | Indulor Chemie GmbH | Induprint SE 9035 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has high heat resistance, excellent gloss, and is free of glycols or glycol ethers. Induprint SE 9035 is used in water-based flexogr...weiterlesen Induprint SE 9035 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has high heat resistance, excellent gloss, and is free of glycols or glycol ethers. Induprint SE 9035 is used in water-based flexographic and gravure-printing inks and water-based overprint varnishes. verkürzen | |
| Nebochips® ACW 6721/1 Lake Red | NECARBO B.V. | Nebochips® ACW 6721/1 Lake Red is a solid pigment concentrate. This solid red granulate appears as an orangish red pigment and is used in printing inks and paint production. It finds application in water based flexo and rotogravure inks for pre-treated al...weiterlesen Nebochips® ACW 6721/1 Lake Red is a solid pigment concentrate. This solid red granulate appears as an orangish red pigment and is used in printing inks and paint production. It finds application in water based flexo and rotogravure inks for pre-treated aluminum, cellophane, and polypropylene, and in paper and water based wood stains. verkürzen | |
| Nebochips® ACW 6736/0 Quinacridone Red | NECARBO B.V. | Nebochips® ACW 6736/0 Quinacridone Red is a solid pigment concentrate. This solid red granulate appears as a dark pink pigment and is used in printing inks and paint production. It finds application in water based flexo and rotogravure inks for pre-treate...weiterlesen Nebochips® ACW 6736/0 Quinacridone Red is a solid pigment concentrate. This solid red granulate appears as a dark pink pigment and is used in printing inks and paint production. It finds application in water based flexo and rotogravure inks for pre-treated aluminum, cellophane, and polypropylene, and in paper and water based wood stains. verkürzen | |
| Nebochips® ACW 7515/0 Titanium Dioxide | NECARBO B.V. | Nebochips® ACW 7515/0 Titanium Dioxide is a solid pigment concentrate. This solid white granulate appears as a white pigment and is used in printing inks and paint production. It finds application in water based flexo and rotogravure inks for pre-treated ...weiterlesen Nebochips® ACW 7515/0 Titanium Dioxide is a solid pigment concentrate. This solid white granulate appears as a white pigment and is used in printing inks and paint production. It finds application in water based flexo and rotogravure inks for pre-treated aluminum, cellophane, and polypropylene, and in paper and water based wood stains. verkürzen | |
| Nebochips® ACW 8506/0 Carbon Black | NECARBO B.V. | Nebochips® ACW 8506/0 Carbon Black is a solid pigment concentrate. This solid black granulate appears as a black pigment and is used in printing inks and paint production. It finds application in water based flexo and rotogravure inks for pre-treated alum...weiterlesen Nebochips® ACW 8506/0 Carbon Black is a solid pigment concentrate. This solid black granulate appears as a black pigment and is used in printing inks and paint production. It finds application in water based flexo and rotogravure inks for pre-treated aluminum, cellophane, and polypropylene, and in paper and water based wood stains. verkürzen | |
| Nebochips® NCA C 3755/0 Arylamide Yellow | NECARBO B.V. | Nebochips® NCA C 3755/0 Arylamide Yellow is a solid pigment concentrate. This solid yellow granulate appears as a yellow pigment and is used in printing inks and paint production. It finds application in water based flexo and rotogravure inks for pre-trea...weiterlesen Nebochips® NCA C 3755/0 Arylamide Yellow is a solid pigment concentrate. This solid yellow granulate appears as a yellow pigment and is used in printing inks and paint production. It finds application in water based flexo and rotogravure inks for pre-treated aluminum, cellophane, and polypropylene, and in paper and water based wood stains. verkürzen | |
| Bayhytherm® 3246 XP | Covestro | Bayhytherm® 3246 XP is a water-reducible, aliphatic, self-crosslinking stoving urethane resin. It is used for the formulation of waterborne, one-component baking systems such as waterborne primer surfacer or general purpose industrial coatings. Bayhytherm...weiterlesen Bayhytherm® 3246 XP is a water-reducible, aliphatic, self-crosslinking stoving urethane resin. It is used for the formulation of waterborne, one-component baking systems such as waterborne primer surfacer or general purpose industrial coatings. Bayhytherm® 3246 XP is the further development of Bayhytherm® 3146 without NMP. verkürzen | |
| RESYDROL® AX 246w/70BG | Allnex | Resydrol® AX 246W/70BG is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-grade...weiterlesen Resydrol® AX 246W/70BG is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-grade waterborne single-coat finishes for industrial applications. verkürzen | Request Sample |
| RESYDROL® AX 247w/70BGMP | Allnex | Resydrol® AX 247W/70BGMP is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-gra...weiterlesen Resydrol® AX 247W/70BGMP is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-grade waterborne single-coat finishes for industrial applications. verkürzen | Request Sample |
| MERGAL® 785 | Arxada – Troy Corporation | MERGAL® 785 is a broad-spectrum in-can preservative used to avoid deterioration and degradation of aqueous systems caused by bacteria, fungi, and yeast. It is useful for the in-can protection of various waterborne end-use products, such as paints, coating...weiterlesen MERGAL® 785 is a broad-spectrum in-can preservative used to avoid deterioration and degradation of aqueous systems caused by bacteria, fungi, and yeast. It is useful for the in-can protection of various waterborne end-use products, such as paints, coatings, stuccos, and other industrial applications. verkürzen | |
| DAPRO® U99 | Elementis | DAPRO® U-99 is a high performance aqueous/solventborne inter facial tension modifier designed for use at relatively low levels to eliminate or diminish film defects. It is particularly effective in solventborne two-component epoxy systems as well as water...weiterlesen DAPRO® U-99 is a high performance aqueous/solventborne inter facial tension modifier designed for use at relatively low levels to eliminate or diminish film defects. It is particularly effective in solventborne two-component epoxy systems as well as waterborne and solventborne alkyd systems and decorative coatings. verkürzen | Request Sample |
| MACRYNAL® SM 6817w/44WA | Allnex | Macrynal® SM 6817w/44WA is an aqueous hydroxy functional acrylic resin. It is used in combination with water-emulsifiable poly-isocyanates for fast drying waterborne 2-pack-topcoats with very good applicability and appearance. This product has low isocyan...weiterlesen Macrynal® SM 6817w/44WA is an aqueous hydroxy functional acrylic resin. It is used in combination with water-emulsifiable poly-isocyanates for fast drying waterborne 2-pack-topcoats with very good applicability and appearance. This product has low isocyanate consumption due to its low hydroxyl value. verkürzen | Request Sample |
| NUOSPERSE® FN 260 | Elementis | NUOSPERSE® FN 260 is a unique, labelling-free, nonionic aqueous wetting and dispersing agent and emulsifier for waterborne colorants, designed to replace the traditionally used alkyl phenol ethoxylates (APE). APE based materials are widely used in the pai...weiterlesen NUOSPERSE® FN 260 is a unique, labelling-free, nonionic aqueous wetting and dispersing agent and emulsifier for waterborne colorants, designed to replace the traditionally used alkyl phenol ethoxylates (APE). APE based materials are widely used in the paint industry as pigment wetting agents, emulsifiers and stabilizers. verkürzen | Request Sample |
| BENDA-LUTZ® 7624 | Benda-Lutz | BENDA-LUTZ® 7624 is an aluminum powder developed for stability in waterborne coating applications. It is resistant to chemicals in harsh environments and has an average particle size of 37. It is suitable for waterbased paints/printing inks and powder coa...weiterlesen BENDA-LUTZ® 7624 is an aluminum powder developed for stability in waterborne coating applications. It is resistant to chemicals in harsh environments and has an average particle size of 37. It is suitable for waterbased paints/printing inks and powder coatings as well as decorative interior coatings. verkürzen | |
| BENDA-LUTZ® 7656 | Benda-Lutz | BENDA-LUTZ® 7656 is an aluminum powder developed for stability in waterborne coating applications. It is resistant to chemicals in harsh environments and has an average particle size of 15. It is suitable for waterbased paints/printing inks and powder coa...weiterlesen BENDA-LUTZ® 7656 is an aluminum powder developed for stability in waterborne coating applications. It is resistant to chemicals in harsh environments and has an average particle size of 15. It is suitable for waterbased paints/printing inks and powder coatings as well as decorative interior coatings. verkürzen | |
| CLiQSMART® 1014 | CLiQ SwissTech (Netherlands) B.V. | CLiQSMART® 1014 is an opaque liquid mineral-based defoamer used in aqueous systems. It has silica and surface-active materials to speed up the defoaming efficiency. Free of polysiloxane, it is usually applied to aqueous matt-to-gloss coating systems, varn...weiterlesen CLiQSMART® 1014 is an opaque liquid mineral-based defoamer used in aqueous systems. It has silica and surface-active materials to speed up the defoaming efficiency. Free of polysiloxane, it is usually applied to aqueous matt-to-gloss coating systems, varnishes, wood stains, adhesives and printing inks. verkürzen | |
| LUBA-print 3036 A | Munzing Chemie | LUBA-print 3036 A is a white polyethylene wax dispersion additive for paints and printing inks. It is used in solvent-based and aqueous gravure and flexo printing inks to improve rub resistance. In solvent-based and aqueous lacquer systems it is used to i...weiterlesen LUBA-print 3036 A is a white polyethylene wax dispersion additive for paints and printing inks. It is used in solvent-based and aqueous gravure and flexo printing inks to improve rub resistance. In solvent-based and aqueous lacquer systems it is used to improve mar resistance. verkürzen | |
| CHEMICRYL 900 BP | Chemipol | CHEMICRYL 900 BP is a polymeric dispersing agent with wetting properties suitable for high-quality aqueous coatings and pigment pastes. CHEMICRYL 900 BP has been specifically designed to stabilize organic and inorganic aqueous-based pigments. Excellent de...weiterlesen CHEMICRYL 900 BP is a polymeric dispersing agent with wetting properties suitable for high-quality aqueous coatings and pigment pastes. CHEMICRYL 900 BP has been specifically designed to stabilize organic and inorganic aqueous-based pigments. Excellent development of color intensity. Increases the stability of the pigments. verkürzen | Request Sample |
| BLISTER FREE 55 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 55 is a defoaming additive for water-based coating systems that is silicone free. It has an excellent de-aerating effect in all types of water-borne alkyd systems, i.e. those, which become water soluble after neutralisation and also in alkyd ...weiterlesen BLISTER FREE 55 is a defoaming additive for water-based coating systems that is silicone free. It has an excellent de-aerating effect in all types of water-borne alkyd systems, i.e. those, which become water soluble after neutralisation and also in alkyd emulsions, with or without co-solvents. There are also very good de-aerating effects in many modified alkyds and alkyd/acrylic hybrids. This product was developed to prevent foam and bubbles during manufacture and application of aqueous coatings. BLISTER FREE 55 destroys foam very quickly by the interfacially active components. In many applications levelling is improved. verkürzen | |
| Borchi® Gen ND Plus | OMG Borchers GmbH | Borchi® Gen ND plus is a wetting and dispersing agent recommended above all for use in solvent-borne and solvent-free industrial coatings. Because of its 100 % active ingredient content, it is equally suitable for waterborne systems such as emulsion paint...weiterlesen Borchi® Gen ND plus is a wetting and dispersing agent recommended above all for use in solvent-borne and solvent-free industrial coatings. Because of its 100 % active ingredient content, it is equally suitable for waterborne systems such as emulsion paints and water based pigment concentrates. It has good wetting and dispersing properties even at low dosages and especially with inorganic pigments. verkürzen | |
| Borchers® Dry 0615 Aqua | OMG Borchers GmbH | Borchers® Dry 0615 Aqua is a highly reactive cobalt-free primary drier for low VOC waterborne oxidatively drying coatings based on a drier in combination with an organic drying accelerator. It can be used in clear coats and pigmented systems and may repla...weiterlesen Borchers® Dry 0615 Aqua is a highly reactive cobalt-free primary drier for low VOC waterborne oxidatively drying coatings based on a drier in combination with an organic drying accelerator. It can be used in clear coats and pigmented systems and may replace other primary driers, especially cobalt types. verkürzen | |
| Eastman AQ™ 55S Polymer | Eastman Chemical B.V. | Eastman AQ™ 55S polymer is a sulfopolyester that disperses directly in hot water without the assistance of surfactants or other additives. It aids the dispersion of many hydrophobic ingredients in water-based products and forms clear films at room tempera...weiterlesen Eastman AQ™ 55S polymer is a sulfopolyester that disperses directly in hot water without the assistance of surfactants or other additives. It aids the dispersion of many hydrophobic ingredients in water-based products and forms clear films at room temperature from aqueous dispersions. Eastman AQ™ 55S has good film integrity when combined with other cosmetic ingredients and is the preferred AQ polymer to improve water and smudge resistance of water-based makeup and mascaras. In hairstyling products, it provides excellent hold under high-humidity conditions and stiffness that is easily modified with plasticizers and thickeners. verkürzen | |
| PATOX WB 102 | Patcham LTD | PATOX WB 102 is (Co/Zn/Zr) water dispersible drying catalyst for use in waterborne, air-drying paints. It is based on metal carboxylates, thus offering catalytic properties similar to the effect of the traditionally used driers in solvent borne air-drying...weiterlesen PATOX WB 102 is (Co/Zn/Zr) water dispersible drying catalyst for use in waterborne, air-drying paints. It is based on metal carboxylates, thus offering catalytic properties similar to the effect of the traditionally used driers in solvent borne air-drying paints; however, the products excel in waterborne paints in offering superior compatibility, workability and performance properties. verkürzen | Request Sample |
| PATOX WB 103 | Patcham LTD | PATOX WB 102 is (Co/Ba/Zr) water dispersible drying catalyst for use in waterborne, air-drying paints. It is based on metal carboxylates, thus offering catalytic properties similar to the effect of the traditionally used driers in solvent borne air-drying...weiterlesen PATOX WB 102 is (Co/Ba/Zr) water dispersible drying catalyst for use in waterborne, air-drying paints. It is based on metal carboxylates, thus offering catalytic properties similar to the effect of the traditionally used driers in solvent borne air-drying paints; however, the products excel in waterborne paints in offering superior compatibility, workability and performance properties. verkürzen | Request Sample |
| N,N-Dimethylethanol-amine Lupragen® N 101 | BASF SE, Intermediates Division | N,N-Dimethylethanol-amine Lupragen® N 101 is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Dimethylethanolamine can be used for the synthesis of polyurethanes and as catalyst for two-component paints. N,N-Dimethylethanolamine is also used as neutralization agent in paints based on water-borne...weiterlesen N,N-Dimethylethanol-amine Lupragen® N 101 is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Dimethylethanolamine can be used for the synthesis of polyurethanes and as catalyst for two-component paints. N,N-Dimethylethanolamine is also used as neutralization agent in paints based on water-borne polyesters, alkyds, acrylic resins and polyurethanes. verkürzen | |
| DOWSIL™ 84 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 84 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may be used as a protective and water-resistant coating for a variety of woven...weiterlesen Dow Corning® 84 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may be used as a protective and water-resistant coating for a variety of woven and non-woven textiles and fabrics. verkürzen | |
| DAOTAN® TW 6493/35WA | Allnex | DAOTAN® TW 6493/35WA is a waterborne, aliphatic polyurethane dispersion, free of solvents and emulsifiers. Dried at elevated temperature it provides transparent, crack-free films, where as for drying at ambient temperature additional solvents are needed. | Request Sample |
| DAOTAN® VTW 1225/40WA | Allnex | Daotan® VTW 1225/40WA is an aqueous, aliphatic polyurethane dispersion which contains hydroxy groups. It has highly flexible coating systems especially for primers and decorative top coats for plastics. | Request Sample |
| Borchi® Coll 30 | OMG Borchers GmbH | Borchi® Coll 30 is an anti-blocking additive for all waterborne paints and coatings. This product is a milky turbid in appearance and is particularly suitable for use in waterborne isocyanate-modified alkyd resins. It accelerates drying and improves film ...weiterlesen Borchi® Coll 30 is an anti-blocking additive for all waterborne paints and coatings. This product is a milky turbid in appearance and is particularly suitable for use in waterborne isocyanate-modified alkyd resins. It accelerates drying and improves film strength and hardness. At addition rates of up to 2 %, hiding power is increased without any adverse effect on gloss. It affects initial and through drying of synthetic resin dispersions, silicate paints and waterborne alkyd resin systems which dry by oxidation. verkürzen | |
| DSX® 1550 | BASF Formulation Additives | DSX® 1550 is a non-ionic rheology modifier for waterborne coatings that provides structural viscosity. It is a polyurethane polymer in water/butoxydiglycol. This yellowish, white hazy liquid is suitable for thickening and modification of flow properties o...weiterlesen DSX® 1550 is a non-ionic rheology modifier for waterborne coatings that provides structural viscosity. It is a polyurethane polymer in water/butoxydiglycol. This yellowish, white hazy liquid is suitable for thickening and modification of flow properties of waterborne polymers and other aqueous systems as well as for finished products like coatings and putties. These properties can be achieved in all kind of emulsions based on e.g. acrylic copolymer, vinyl acetate homopolymer, acrylic polymers, PVAc-VC copolymers, polyurethanes, amine neutralized and emulsified systems. verkürzen | |
| BYK-1781 | BYK | BYK-1781 is a silicone-containing defoamer for aqueous systems to remove microfoam generated during application. It is highly effective in aqueous systems, especially in systems with airless or airmix application. It offers the coating outstanding protect...weiterlesen BYK-1781 is a silicone-containing defoamer for aqueous systems to remove microfoam generated during application. It is highly effective in aqueous systems, especially in systems with airless or airmix application. It offers the coating outstanding protection against microfoam and does not impact the transparency or the gloss in high-gloss systems. BYK-1781 can be used in both pigmented systems and clear coats. The additive is solvent-free. Even in aqueous UV systems, BYK-1781 has an excellent defoaming effect. verkürzen | |
| MERGAL® 781 | Arxada – Troy Corporation | MERGAL® 781 is a broad-spectrum in-can preservative used to avoid deterioration and degradation of aqueous systems caused by bacteria, fungi, and yeast. It is useful for the in-can protection of various waterborne end-use products, such as paints, coating...weiterlesen MERGAL® 781 is a broad-spectrum in-can preservative used to avoid deterioration and degradation of aqueous systems caused by bacteria, fungi, and yeast. It is useful for the in-can protection of various waterborne end-use products, such as paints, coatings, stuccos, and other industrial applications. This product was designed specifically for the protection of waterborne systems in which formaldehyde is a major concern. MERGAL® 781 is usually suitable for use with pHs between 3-10 and temperatures up to 100° C. verkürzen | |
| MERGAL® 784 | Arxada – Troy Corporation | MERGAL® 784 is a broad-spectrum in-can preservative used to avoid deterioration and degradation of aqueous systems caused by bacteria, fungi, and yeast. It is useful for the in-can protection of various waterborne end-use products, such as paints, coating...weiterlesen MERGAL® 784 is a broad-spectrum in-can preservative used to avoid deterioration and degradation of aqueous systems caused by bacteria, fungi, and yeast. It is useful for the in-can protection of various waterborne end-use products, such as paints, coatings, stuccos, and other industrial applications. This product was designed specifically for the protection of waterborne systems in which formaldehyde is a major concern. MERGAL® 784 is usually suitable for use with pHs between 3-10 and temperatures up to 60° C. verkürzen | |
| LIOPUR PFL 3242 | Synthopol Chemie Germany | LIOPUR PFL 3242 is an aqueous aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. It is partly biobased, solvent- and TEA-free. Films based on LIOPUR PFL 3242 are distinguished by high toughness and resilience and tear streng...weiterlesen LIOPUR PFL 3242 is an aqueous aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. It is partly biobased, solvent- and TEA-free. Films based on LIOPUR PFL 3242 are distinguished by high toughness and resilience and tear strength. Owing to its very high abrasion resistance and its excellent chemical resistance, especially against coffee and mustard. LIOPUR PFL 3242 can be used in combination with water-emulsifiable polyisocyanates for airdrying, aqueous, 2-pack parquet floor varnishes. verkürzen | |
| DOWSIL™ 85 Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 85 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may also be used as a protective and water-resistant coating for a variety of ...weiterlesen Dow Corning® 85 Additive is a silicone additive for aqueous inks. It is used as an additive for water-based and dilutable inks to provide water and mild chemical resistance. It may also be used as a protective and water-resistant coating for a variety of woven and non-woven textiles and fabrics. verkürzen | |
| Dispex® Ultra PX 4575 | BASF SE, Intermediates Division | Dispex® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. Dispex® Ultra ...weiterlesen Dispex® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. Dispex® Ultra PX 4575 is especially suited for the dispersion of pigments in waterborne coatings and colorants. verkürzen | |
| 3123 Permanent Red FBB | Zhenjiang Jinyang Pigment Chemical Co., Ltd. | 3123 Permanent Red FBB has a pH value of 7.0, oil absorption of equal to or less than 55, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent-based paints, and possible applications in aqueou...weiterlesen 3123 Permanent Red FBB has a pH value of 7.0, oil absorption of equal to or less than 55, and a heat resistance of 300. It has recommended applications in offset inks, solvent and water based inks, solvent-based paints, and possible applications in aqueous based paints, PS, AS, ABS, and PMMA. verkürzen | |
| SILBERCOTE® AQ E666 F2X | Silberline Manufacturing Co., Inc. | SILBERCOTE® AQ E666 F2X is an inhibited aluminum pigment paste with high purity and a medium particle size. This product is designed to provide a bright, white face tone and an exceptionally dark flop effect in water-based automotive paints, SILBERCOTE® A...weiterlesen SILBERCOTE® AQ E666 F2X is an inhibited aluminum pigment paste with high purity and a medium particle size. This product is designed to provide a bright, white face tone and an exceptionally dark flop effect in water-based automotive paints, SILBERCOTE® AQ E666 F2X is non-leafing and also applicable to waterborne systems. verkürzen | |
| LUBA-print 164/G | Munzing Chemie | LUBA-print 164/G is a white amide wax dispersion additive for paints and printing inks. It finds application as a aqueous lubricant and release agent. In water-based lacquers, it is used to improve slip and scratch resistance.It is also a pelletizing aid ...weiterlesen LUBA-print 164/G is a white amide wax dispersion additive for paints and printing inks. It finds application as a aqueous lubricant and release agent. In water-based lacquers, it is used to improve slip and scratch resistance.It is also a pelletizing aid for granule-technique to improve the anti-blocking effect. verkürzen | |
| Soluryl EW-842 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl EW-842 is a self-crosslinkable acrylic copolymer emulsion for use in 1K universal water-based wood coating. | |
| AERODISP® W 7520 P | Evonik Operations GmbH, BL Coating Additives | AERODISP® W 7520 P is a low viscosity, water-based dispersionof AEROSIL® fumed silica, with a slightly alkaline pH. | Request Sample |
| DYFLEX® LP 2809 | EPS Materials | DYFLEX® LP 2809 is a self-crosslinking water based, pure acrylic-copolymer emulsion binder for interior and outdoor applications. | |
| Pigment Red 53:1 (Corimax Red C) | ZEYA Chemicals (Haimen) Co., Ltd. | Pigment Red 53:1 (Corimax Red C) is a red pigment lake recommended for offset and water-based inks. | |
| PROXEL® BZ | Arxada – Troy Corporation | PROXEL® BZ is a dual-active, broad-spectrum biocide for the wet-state preservation of industrial water-based products. | |
| PROXEL® LS | Arxada – Troy Corporation | PROXEL® LS is a dual-active, broad-spectrum biocide for the wet-state preservation of industrial water-based products. | |
| Dynoadd® D-962 | Dynoadd by Dynea | Dynoadd® D-962 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-962 provides excellent pigment affinity and effective steric stabilization. Pigment concentrates ...weiterlesen Dynoadd® D-962 is a non-ionic, structured polymeric dispersing agent for water-borne formulations. Suitable for a broad range of organic pigments, Dynoadd® D-962 provides excellent pigment affinity and effective steric stabilization. Pigment concentrates produced using Dynoadd® D-962 have low viscosity and give excellent color strength and gloss in a wide variety of water-borne industrial coatings and printing inks. verkürzen | Request Sample |
| POLYPHASE® 689 | Arxada – Troy Corporation | POLYPHASE® 689 is a broad-spectrum, water-based film preservative that is effective against a wide vaiety of damaging microorganisms. The perservative is particularly useful in water-based outdoor products in which Volatile Organic Compounds (VOCs) are a...weiterlesen POLYPHASE® 689 is a broad-spectrum, water-based film preservative that is effective against a wide vaiety of damaging microorganisms. The perservative is particularly useful in water-based outdoor products in which Volatile Organic Compounds (VOCs) are a major comcern. POLYPHASE® 689 provides long-lasting protection against both algae & fungi. It is particularly effective for application over cementitious substrates. verkürzen | |
| Anquamine® 731 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 731 is a water-based curing agent is specifically designed for a standard liquid epoxy resin. It is specifically designed for costeffective high-film build concrete coatings. It is particularly suitable for water-based self-leveling systems. ...weiterlesen Anquamine® 731 is a water-based curing agent is specifically designed for a standard liquid epoxy resin. It is specifically designed for costeffective high-film build concrete coatings. It is particularly suitable for water-based self-leveling systems. Anquamine® 731 curing agent easily emulsifies standard liquid epoxy resins without the need for emulsifiable or pre-emulsified epoxy resins. verkürzen | Request Sample |
| SCHWEGO® Foam 8013 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 8013 is a defoamer for water-based coating systems. This light yellowish, milky cloudy liquid is silicone free and is composed of a combination of hydrocarbons with emulsifying additives. This highly effective defoamer is suitable for all wa...weiterlesen SCHWEGO® Foam 8013 is a defoamer for water-based coating systems. This light yellowish, milky cloudy liquid is silicone free and is composed of a combination of hydrocarbons with emulsifying additives. This highly effective defoamer is suitable for all water based systems and adhesives, especially for those based on polyurethane and acrylate. It is easy to emulsify in water. verkürzen | |
| Induprint SE 2457 | Indulor Chemie GmbH | Induprint SE 2457 is a soft emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has excellent water resistance, high gloss, excellent pigment wetting, and good adhesion on films and foils. Induprint SE 2457 i...weiterlesen Induprint SE 2457 is a soft emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has excellent water resistance, high gloss, excellent pigment wetting, and good adhesion on films and foils. Induprint SE 2457 is used in water-based overprint varnishes and water-based flexographic and gravure-printing inks. verkürzen | |
| Induprint SE 255 | Indulor Chemie GmbH | Induprint SE 255 is a soft emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has excellent water resistance, high gloss, excellent pigment wetting, and good adhesion on films and foils. Induprint SE 255 is ...weiterlesen Induprint SE 255 is a soft emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has excellent water resistance, high gloss, excellent pigment wetting, and good adhesion on films and foils. Induprint SE 255 is used in water-based overprint varnishes and water-based flexographic and gravure-printing inks. verkürzen | |
| Induprint SE 371 | Indulor Chemie GmbH | Induprint SE 371 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has high heat resistance, excellent gloss, is fast drying, and free of glycols or glycol ethers. Induprint SE 371 is used in water-ba...weiterlesen Induprint SE 371 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has high heat resistance, excellent gloss, is fast drying, and free of glycols or glycol ethers. Induprint SE 371 is used in water-based overprint varnishes and water-based flexographic and gravure-printing inks. verkürzen | |
| Induprint SE 90 | Indulor Chemie GmbH | Induprint SE 90 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has high heat resistance, excellent gloss, VOC less than 0.05%, and is free of glycols or glycol ethers. Induprint SE 90 is used in wa...weiterlesen Induprint SE 90 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has high heat resistance, excellent gloss, VOC less than 0.05%, and is free of glycols or glycol ethers. Induprint SE 90 is used in water-based overprint varnishes and water-based flexographic and gravure-printing inks. verkürzen | |
| Induprint SE 91 | Indulor Chemie GmbH | Induprint SE 91 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has high heat resistance, excellent gloss, VOC less than 0.05%, and is free of glycols or glycol ethers. Induprint SE 91 is used in wa...weiterlesen Induprint SE 91 is an emulsion polymer based on styrene and acrylates. It is a let-down vehicle and binder. This product has high heat resistance, excellent gloss, VOC less than 0.05%, and is free of glycols or glycol ethers. Induprint SE 91 is used in water-based overprint varnishes and water-based flexographic and gravure-printing inks. verkürzen | |
| Polyvinyl Acetate Emulsion | Prakash Chemical Intl. Pvt. Ltd. | Polyvinyl Acetate Emulsion is a water based unplasticized polyvinyl acetate homopolymer emulsion stabilized with polyvinyl alcohol. It can be used as a coating binder in water based paints, industrial paints, and architectural paints. This product can als...weiterlesen Polyvinyl Acetate Emulsion is a water based unplasticized polyvinyl acetate homopolymer emulsion stabilized with polyvinyl alcohol. It can be used as a coating binder in water based paints, industrial paints, and architectural paints. This product can also be used for producing superior quality wood/paper/building adhesives and can provide high tensile strength with superior shear stability. verkürzen | |
| Permanent Orange G | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Permanent Orange G is a semi-transparent reddish orange pigment with moderate water and light fastness, as well as good thermal and solvent fastness. This product has a density of 1.4-1.5 g/cm3 and a pH value of 6.5-7.5. It finds application in water-base...weiterlesen Permanent Orange G is a semi-transparent reddish orange pigment with moderate water and light fastness, as well as good thermal and solvent fastness. This product has a density of 1.4-1.5 g/cm3 and a pH value of 6.5-7.5. It finds application in water-based inks, industrial paints, and in water-based decorative paints. verkürzen | |
| Phthalo Blue BT (4320) | Ggink International Limited | Phthalo Blue BT (4320) is a dry pigment with a color index of (PB 15:6). This product is used as a pigment in OEM and refinish automotive paint applications as well as in solvent based, water based, coil coating and powder industrial paint applications. T...weiterlesen Phthalo Blue BT (4320) is a dry pigment with a color index of (PB 15:6). This product is used as a pigment in OEM and refinish automotive paint applications as well as in solvent based, water based, coil coating and powder industrial paint applications. This product is also used in solvent and water based decorative paint applications. verkürzen | |
| Indoraun Blue BR (4800) | Ggink International Limited | Indoraun Blue BR (4800) is a dry pigment, with a color index of (PB 80). This product is used as a pigment in OEM and refinish automotive paint applications. It is also used in solvent based, water based, coil coating and powder industrial paint applicati...weiterlesen Indoraun Blue BR (4800) is a dry pigment, with a color index of (PB 80). This product is used as a pigment in OEM and refinish automotive paint applications. It is also used in solvent based, water based, coil coating and powder industrial paint applications, as well as in solvent and water based decorative paint applications. verkürzen | |
| Pigment Yellow 13 | Hainan Zhongxin Chemical Co., Ltd. | Pigment Yellow 13 is a water soluble yellow powder which can impart a transparent or semi transparent gloss to a product. It has a molecular formula C36H34Cl2N6O4 and is primarily used for offset, solvent and water-based inks. Pigment Yellow 13 has addit...weiterlesen Pigment Yellow 13 is a water soluble yellow powder which can impart a transparent or semi transparent gloss to a product. It has a molecular formula C36H34Cl2N6O4 and is primarily used for offset, solvent and water-based inks. Pigment Yellow 13 has additional uses in various paints including, decorative, water based and solvent based paints and powder coatings. verkürzen | |
| TEGO® AddBond DS 1300 | Evonik Operations GmbH, BL Coating Additives | TEGO® AddBond DS 1300 improves adhesion of waterborne coatingson steel, galvanized steel, aluminum, and plastics. | Request Sample |
| SETAQUA® 6411 | Allnex | SETAQUA® 6411 (formerly SETAQUA® X 12095) is a surfactant free aqueous dispersion of acrylic polymers. | Request Sample |
| SETAQUA® 6776 | Allnex | SETAQUA® 6776 is an aqueous dispersion of acrylic polymers (APE-free modification of Setaqua 6769). | Request Sample |
| Vinyltriisopropenyloxysilane | Dalian Onichem Co., Ltd. | Vinyltriisopropenyloxysilane is suited for waterborne systems. This product is used in acrylic and vinyl emulsions. | Request Sample |
| BAYHYDROL® UV XP 2687 | Covestro | A urethane Acrylate Emulsion used in the formulation of waterborne UV curable coatings for wood. | |
| ADDITOL® VXW 6394 | Allnex | ADDITOL® VXW 6394 is a wetting and dispersing agent for aqueous resin-free pigment concentrates. | Request Sample |
| AQUACER 501 | BYK | AQUACER 501 is an HDPE-based wax emulsion for aqueous systems to improve surface protection. | |
| Pliodisp® 3752 | Omnova Solutions | Pliodisp® 3752 is a non-associative acrylic thickener based on a copolymer of acrylic acid and an acrylic ester. It is used as an acrylic thickener for waterborne coatings. Pliodisp® 3752 develops very high viscosity in aqueous solutions and provides a hi...weiterlesen Pliodisp® 3752 is a non-associative acrylic thickener based on a copolymer of acrylic acid and an acrylic ester. It is used as an acrylic thickener for waterborne coatings. Pliodisp® 3752 develops very high viscosity in aqueous solutions and provides a highly thixotropic behavior to the final product. verkürzen | |
| ORDISOL SWT-05 | Concentrol, S.A., Productos | ORDISOL SWT-05 is a silicone surfactant in aqueous systems and solvent based systems. It may be added either as a feed or prediluted in suitable solvents, and is soluble in aqueous solution. ORDISOL SWT-05 has excellent slip, improves flow, and provides a...weiterlesen ORDISOL SWT-05 is a silicone surfactant in aqueous systems and solvent based systems. It may be added either as a feed or prediluted in suitable solvents, and is soluble in aqueous solution. ORDISOL SWT-05 has excellent slip, improves flow, and provides an additional anti-blocking effect. verkürzen | |
| DAPRO® FX 514 | Elementis | DAPRO® FX 514 is a VOC-free, odourless aqueous plasticizer for waterborne adhesive systems like floor and wood applications, that provides high film flexibility and tackiness to enhance adhesive strength and durability of the bond. DAPRO® FX 514 is a clea...weiterlesen DAPRO® FX 514 is a VOC-free, odourless aqueous plasticizer for waterborne adhesive systems like floor and wood applications, that provides high film flexibility and tackiness to enhance adhesive strength and durability of the bond. DAPRO® FX 514 is a clear liquid and is predominately based on renewable resources. verkürzen | Request Sample |
| NUOSPERSE® 2006 | Elementis | NUOSPERSE® 2006 is an organic- solvent free, anionic, aqueous surface active compound which can be used as a dispersing and wetting agent in waterborne as well as solventborne systems. It has excellent substrate wetting properties. NUOSPERSE® 2006 can als...weiterlesen NUOSPERSE® 2006 is an organic- solvent free, anionic, aqueous surface active compound which can be used as a dispersing and wetting agent in waterborne as well as solventborne systems. It has excellent substrate wetting properties. NUOSPERSE® 2006 can also be used as a interfacial tension modifier of compatibilizer. verkürzen | Request Sample |
| Snowtack™ SE780K | Lawter | Snowtack™ SE780K is a waterborne tackifier that is solvent-free and has a resin component that offers superior adhesive ability to a variety of substrates. It displays good water resistance, is APE-free, has good mechanical stability and high cohesion. Th...weiterlesen Snowtack™ SE780K is a waterborne tackifier that is solvent-free and has a resin component that offers superior adhesive ability to a variety of substrates. It displays good water resistance, is APE-free, has good mechanical stability and high cohesion. The product has applications in various waterborne adhesive systems. verkürzen | |
| METOLAT® 388 | Munzing Chemie | METOLAT® 388 is a yellow low foaming, liquid, wetting agent which is suitable for many aqueous and non-aqueous systems. It improves the pigment dispersion in emulsion paints especially with pigments which are difficult to disperse. METOLAT 388 is biodegra...weiterlesen METOLAT® 388 is a yellow low foaming, liquid, wetting agent which is suitable for many aqueous and non-aqueous systems. It improves the pigment dispersion in emulsion paints especially with pigments which are difficult to disperse. METOLAT 388 is biodegradable and is recommended specifically for environmental safe systems. verkürzen | |
| RHEOLATE® 125 | Elementis | RHEOLATE® 125 rheological additive is an aqueous alkali swellable acrylic (HASE) thickener. RHEOLATE® 125 rheologicy modifier is cost effective with high thickening efficiency in the low to medium-shear-rate range. It is high shear properties provide exc...weiterlesen RHEOLATE® 125 rheological additive is an aqueous alkali swellable acrylic (HASE) thickener. RHEOLATE® 125 rheologicy modifier is cost effective with high thickening efficiency in the low to medium-shear-rate range. It is high shear properties provide excellent atomization and is suitable for various waterborne paint and coating systems. verkürzen | Request Sample |
| CLiQSPERSE® 172 | CLiQ SwissTech (Netherlands) B.V. | CLiQSPERSE® 172 is a yellowish liquid polycarboxylate-based dispersing agent for aqueous systems. The odorless low viscous sodium neutralised polymer is VOC-free, a consideration in modern decorative paint systems. It is recommended in aqueous latex paint...weiterlesen CLiQSPERSE® 172 is a yellowish liquid polycarboxylate-based dispersing agent for aqueous systems. The odorless low viscous sodium neutralised polymer is VOC-free, a consideration in modern decorative paint systems. It is recommended in aqueous latex paints, slurries based on extenders and in inorganic pigments and pigment concentrates. verkürzen | |
| LUBA-print W 5700 | Munzing Chemie | LUBA-print W 5700 is a white polyethylene wax dispersion additive for paints and printing inks. It is used in aqueous lacquer systems to improve slip property and mar resistance. In aqueous printing inks, it is used to improve the rub and mar resistance w...weiterlesen LUBA-print W 5700 is a white polyethylene wax dispersion additive for paints and printing inks. It is used in aqueous lacquer systems to improve slip property and mar resistance. In aqueous printing inks, it is used to improve the rub and mar resistance with good gloss stability. verkürzen | |
| Defoamer EDW | HS CHEM CO.,LTD | Defoamer EDW is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a yellowish white liquid and is soluble in water. It is often used in emulsion paint, latex ...weiterlesen Defoamer EDW is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a yellowish white liquid and is soluble in water. It is often used in emulsion paint, latex paint systems, and aqueous latex adhesives. verkürzen | |
| Defoamer EDW-S | HS CHEM CO.,LTD | Defoamer EDW-S is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a yellowish white liquid and is soluble in water. It is often used in emulsion paint, late...weiterlesen Defoamer EDW-S is a silicone free defoamer designed to prevent and eliminate foaming during and after the manufacturing process for aqueous systems. This product is a yellowish white liquid and is soluble in water. It is often used in emulsion paint, latex paint systems, and aqueous latex adhesives. verkürzen | |
| LUBA-print 2036 A | Munzing Chemie | LUBA-print 2036 A is a white polyethylene wax dispersion additive for paints and printing inks. It is used in solvent-based and aqueous gravure and flexo-printing inks to improve rub resistance. In solvent-based and aqueous lacquers it is used to improve ...weiterlesen LUBA-print 2036 A is a white polyethylene wax dispersion additive for paints and printing inks. It is used in solvent-based and aqueous gravure and flexo-printing inks to improve rub resistance. In solvent-based and aqueous lacquers it is used to improve mar resistance and slip property. verkürzen | |
| TEGO® Glide 494 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide 494 is a highly efficient emulsion providing good abrasion resistance in aqueous formulations. It offers very good slip and anti-blocking properties as well as good rub resistance in waterborne formulations. This product creates a soft and sli...weiterlesen TEGO® Glide 494 is a highly efficient emulsion providing good abrasion resistance in aqueous formulations. It offers very good slip and anti-blocking properties as well as good rub resistance in waterborne formulations. This product creates a soft and slippery touch and is free of aromatic solvents and tin. verkürzen | Request Sample |
| Luzenac 20M0 | Imerys Performance Additives | Luzenac 20M0 is a multipurpose fine talc/chlorite. Suitable for water- and solvent-borne Decorative paints and Industrial primers. Enhances dispersability in water-based paints, lowers viscosities in polar and non-polar bases. | |
| CH-910 | Yangzhou Chenhua New Material CO., LTD. | CH-910 is a milky liquid which is an aliphatic water-borne polyurethane resin. This product has an anionic lonic charge and a clear luster. CH-910 is used as a rigid substrate coating. | |
| Octa-Soligen® 421 Aqua | OMG Borchers GmbH | Octa-Soligen® 421 Aqua was developed in our laboratory specially for drying waterborne alkyd resins. It is very compatible with standard resins and is therefore particularly stable. This product causes no yellowing. | |
| NOVAPINT™ E RL3 | Chromaflo Technologies | NOVAPINT™ E RL3 is a liquid colorant with the color index number P.R.168 and a 10% pigment content. It is a part of Chromaflo's Novapint™ E Colorants series which combines all important technical factors for successful POS tinting with facade paints. They...weiterlesen NOVAPINT™ E RL3 is a liquid colorant with the color index number P.R.168 and a 10% pigment content. It is a part of Chromaflo's Novapint™ E Colorants series which combines all important technical factors for successful POS tinting with facade paints. They offer a range of high performance colorants for silicone emulsions and silicate dispersion paints, as well as acrylic plasters. A selection that ensures to meet the highest demands of water repellency and weather fastness in facade tinting. In addition to facade paints, Novapint™ E also shows excellent results in waterborne decorative and industrial paints. They are an all-round range of colorants that covers the full spectrum of waterborne paints, from facade paints to interior and exterior latex paints. These colorants, both organic and inorganic, are fully compatible and can be used in combination with other Chromaflo technologies. This technology mix is a perfect tool for creating customized systems, covering a complete paint technology portfolio including water and solvent borne products. verkürzen | Request Sample |
| NOVAPINT™ E YH3 | Chromaflo Technologies | NOVAPINT™ E YH3 is a liquid colorant with the color index number P.Y.138 and a 40% pigment content. It is a part of Chromaflo's Novapint™ E Colorants series which combines all important technical factors for successful POS tinting with facade paints. They...weiterlesen NOVAPINT™ E YH3 is a liquid colorant with the color index number P.Y.138 and a 40% pigment content. It is a part of Chromaflo's Novapint™ E Colorants series which combines all important technical factors for successful POS tinting with facade paints. They offer a range of high performance colorants for silicone emulsions and silicate dispersion paints, as well as acrylic plasters. A selection that ensures to meet the highest demands of water repellency and weather fastness in facade tinting. In addition to facade paints, Novapint™ E also shows excellent results in waterborne decorative and industrial paints. They are an all-round range of colorants that covers the full spectrum of waterborne paints, from facade paints to interior and exterior latex paints. These colorants, both organic and inorganic, are fully compatible and can be used in combination with other Chromaflo technologies. This technology mix is a perfect tool for creating customized systems, covering a complete paint technology portfolio including water and solvent borne products. verkürzen | Request Sample |
| Novapint™ E WX11 | Chromaflo Technologies | Novapint™ E WX11 is an inorganic, white colorant with the color index number PW6 and a 65% pigment content. It is a part of Chromaflo's Novapint™ E Colorants series which combines all important technical factors for successful POS tinting with facade pain...weiterlesen Novapint™ E WX11 is an inorganic, white colorant with the color index number PW6 and a 65% pigment content. It is a part of Chromaflo's Novapint™ E Colorants series which combines all important technical factors for successful POS tinting with facade paints. They offer a range of high performance colorants for silicone emulsions and silicate dispersion paints, as well as acrylic plasters. A selection that ensures to meet the highest demands of water repellency and weather fastness in facade tinting. In addition to facade paints, Novapint™ E also shows excellent results in waterborne decorative and industrial paints. They are an all-round range of colorants that covers the full spectrum of waterborne paints, from facade paints to interior and exterior latex paints. These colorants, both organic and inorganic, are fully compatible and can be used in combination with other Chromaflo technologies. This technology mix is a perfect tool for creating customized systems, covering a complete paint technology portfolio including water and solvent borne products. verkürzen | Request Sample |
| Novapint™ E BX10 | Chromaflo Technologies | Novapint™ E BX10 is an inorganic, cobalt blue colorant with the color index number PB28 and a 64% pigment content. It is a part of Chromaflo's Novapint™ E Colorants series which combines all important technical factors for successful POS tinting with faca...weiterlesen Novapint™ E BX10 is an inorganic, cobalt blue colorant with the color index number PB28 and a 64% pigment content. It is a part of Chromaflo's Novapint™ E Colorants series which combines all important technical factors for successful POS tinting with facade paints. They offer a range of high performance colorants for silicone emulsions and silicate dispersion paints, as well as acrylic plasters. A selection that ensures to meet the highest demands of water repellency and weather fastness in facade tinting. In addition to facade paints, Novapint™ E also shows excellent results in waterborne decorative and industrial paints. They are an all-round range of colorants that covers the full spectrum of waterborne paints, from facade paints to interior and exterior latex paints. These colorants, both organic and inorganic, are fully compatible and can be used in combination with other Chromaflo technologies. This technology mix is a perfect tool for creating customized systems, covering a complete paint technology portfolio including water and solvent borne products. verkürzen | Request Sample |
| Novapint™ E GX12 | Chromaflo Technologies | Novapint™ E GX12 is an inorganic, turquoise green colorant with the color index number PB28 and a 48% pigment content. It is a part of Chromaflo's Novapint™ E Colorants series which combines all important technical factors for successful POS tinting with ...weiterlesen Novapint™ E GX12 is an inorganic, turquoise green colorant with the color index number PB28 and a 48% pigment content. It is a part of Chromaflo's Novapint™ E Colorants series which combines all important technical factors for successful POS tinting with facade paints. They offer a range of high performance colorants for silicone emulsions and silicate dispersion paints, as well as acrylic plasters. A selection that ensures to meet the highest demands of water repellency and weather fastness in facade tinting. In addition to facade paints, Novapint™ E also shows excellent results in waterborne decorative and industrial paints. They are an all-round range of colorants that covers the full spectrum of waterborne paints, from facade paints to interior and exterior latex paints. These colorants, both organic and inorganic, are fully compatible and can be used in combination with other Chromaflo technologies. This technology mix is a perfect tool for creating customized systems, covering a complete paint technology portfolio including water and solvent borne products. verkürzen | Request Sample |
| Novapint™ E BX11 | Chromaflo Technologies | Novapint™ E BX11 is an inorganic, ultra marine blue colorant with the color index number PB29 and a 50% pigment content. It is a part of Chromaflo's Novapint™ E Colorants series which combines all important technical factors for successful POS tinting wit...weiterlesen Novapint™ E BX11 is an inorganic, ultra marine blue colorant with the color index number PB29 and a 50% pigment content. It is a part of Chromaflo's Novapint™ E Colorants series which combines all important technical factors for successful POS tinting with facade paints. They offer a range of high performance colorants for silicone emulsions and silicate dispersion paints, as well as acrylic plasters. A selection that ensures to meet the highest demands of water repellency and weather fastness in facade tinting. In addition to facade paints, Novapint™ E also shows excellent results in waterborne decorative and industrial paints. They are an all-round range of colorants that covers the full spectrum of waterborne paints, from facade paints to interior and exterior latex paints. These colorants, both organic and inorganic, are fully compatible and can be used in combination with other Chromaflo technologies. This technology mix is a perfect tool for creating customized systems, covering a complete paint technology portfolio including water and solvent borne products. verkürzen | Request Sample |
| Novapint™ E CX10 | Chromaflo Technologies | Novapint™ E CX10 is an inorganic, oxide black colorant with the color index number PBk33 and a 54% pigment content. It is a part of Chromaflo's Novapint™ E Colorants series which combines all important technical factors for successful POS tinting with fac...weiterlesen Novapint™ E CX10 is an inorganic, oxide black colorant with the color index number PBk33 and a 54% pigment content. It is a part of Chromaflo's Novapint™ E Colorants series which combines all important technical factors for successful POS tinting with facade paints. They offer a range of high performance colorants for silicone emulsions and silicate dispersion paints, as well as acrylic plasters. A selection that ensures to meet the highest demands of water repellency and weather fastness in facade tinting. In addition to facade paints, Novapint™ E also shows excellent results in waterborne decorative and industrial paints. They are an all-round range of colorants that covers the full spectrum of waterborne paints, from facade paints to interior and exterior latex paints. These colorants, both organic and inorganic, are fully compatible and can be used in combination with other Chromaflo technologies. This technology mix is a perfect tool for creating customized systems, covering a complete paint technology portfolio including water and solvent borne products. verkürzen | Request Sample |
