| GENOMER* 4259 | Rahn AG | GENOMER* 4259 is a new difunctional, tin-free, aliphatic urethane acrylate from RAHN with low viscosity and high reactivity. This product has excellent formulation latitude owing to its low viscosity and compatibility with other traditional UV components...weiterlesen GENOMER* 4259 is a new difunctional, tin-free, aliphatic urethane acrylate from RAHN with low viscosity and high reactivity. This product has excellent formulation latitude owing to its low viscosity and compatibility with other traditional UV components. Cured alone, GENOMER* 4259 provides high hardness and modulus, excellent impact resistance and exceptional light stability for use in outdoor applications. It also combines good toughness and excellent optical clarity with high chemical resistance and excellent abrasion resistance. verkürzen | Request Sample |
| Vilkyd 257AH55 | Vil Resins | Vilkyd 257AH55 is a polyurethane alkyd resin based off of linoleic-rich fatty acids that has been esterified with pentaerythritol. This product can be used in decorative paints and floor varnishes that exhibit high chemical and abrasion resistance and con...weiterlesen Vilkyd 257AH55 is a polyurethane alkyd resin based off of linoleic-rich fatty acids that has been esterified with pentaerythritol. This product can be used in decorative paints and floor varnishes that exhibit high chemical and abrasion resistance and contains 68% fatty acids and 55% non-volatile compounds. verkürzen | |
| EBECRYL® 8811 | Allnex | EBECRYL® 8811 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw ma...weiterlesen EBECRYL® 8811 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw materials, so the overall quinone content is reduced, but not zero in EBECRYL® 8811.) EBECRYL® 8811 exhibits rapid surface cure response in both low and high energy cure systems. It is especially recommended for use in UV LED and UVA curing in order to obtain good surface cure. Films of EBECRYL® 8811 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness, abrasion resistance, and are resistant to yellowing. verkürzen | Request Sample |
| EBECRYL® 4101 | Allnex | EBECRYL® 4101 is an undiluted, unsaturated aliphatic urethane acrylate designed for coatings on wood, cork, furniture, paper, parquet and film. Coatings formulated with EBECRYL® 4101 are characterized by good chemical resistant properties, mechanical resi...weiterlesen EBECRYL® 4101 is an undiluted, unsaturated aliphatic urethane acrylate designed for coatings on wood, cork, furniture, paper, parquet and film. Coatings formulated with EBECRYL® 4101 are characterized by good chemical resistant properties, mechanical resistant properties, and high flexibility. verkürzen | Request Sample |
| EBECRYL® 4396 | Allnex | EBECRYL® 4396 is an undiluted isocyanate aliphatic functional urethane acrylate designed for use in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal. It can be combined with hydroxyl functional resins to formul...weiterlesen EBECRYL® 4396 is an undiluted isocyanate aliphatic functional urethane acrylate designed for use in UV/EB coatings and in two component dual cure systems for coatings on wood, plastic and metal. It can be combined with hydroxyl functional resins to formulate coatings which cure by dual processes; UV/EB induced polymerization and NCO/OH reaction. The product is also used in straight UV/EB curing coatings to improve the adhesion on substrates such as plastic, metal and exotic woods. verkürzen | Request Sample |
| CN9165A | Sartomer Americas | CN9165A is a clear liquid tetrafunctional aromatic urethane acrylate for use in ultra violet and electron beam curing compositions. Key properties include fast cure response, excellent adhesion, scratch resistance, and film hardness. | |
| Hauthane HD-2501 | Hauthaway | Hauthane HD-2501 is a soft, aliphatic, polycarbonate-based, polyurethane dispersion. It was designed primarily for use on flexible substrates as a coating, saturant or impregnant. HD-2501 can be used as a sole vehicle or blended with acrylic emulsions for...weiterlesen Hauthane HD-2501 is a soft, aliphatic, polycarbonate-based, polyurethane dispersion. It was designed primarily for use on flexible substrates as a coating, saturant or impregnant. HD-2501 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. It may be thickened with associative thickeners for knife-over-roll or similar methods. verkürzen | |
| Trixene ASF | Baxenden Chemicals Ltd. | Trixene ASF is a mono-fnctional isocyanate derivative that is a hydrogen scavenger, for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces o...weiterlesen Trixene ASF is a mono-fnctional isocyanate derivative that is a hydrogen scavenger, for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces of water. Trixene ASF is a faster-reacting and more efficient alternative based on p-toluenesulphonyl isocyanate (PTSI). verkürzen | |
| LIOPUR 2004-422 | Synthopol Chemie Germany | LIOPUR 2004-422 is an aqueous, self-crosslinking aromatic urethane acrylic emulsion. Films of the dispersion are transparent and tack-free, with high hardness, flexibility and elasticity. Films based on LIOPUR 2004-422 display very good water resistance a...weiterlesen LIOPUR 2004-422 is an aqueous, self-crosslinking aromatic urethane acrylic emulsion. Films of the dispersion are transparent and tack-free, with high hardness, flexibility and elasticity. Films based on LIOPUR 2004-422 display very good water resistance and good resistance to ethanol. LIOPUR 2004-422 is recommended for waterbased 1C-wood lacquers with high hardness, good taber abraison and very good chemical resistance. verkürzen | |
| UCECOAT® 2805 | Allnex | UCECOAT® 2805 is a low viscosity, high performance UV/EB energy curable polyurethane dispersion suitable for indirect food contact applications. The product is solvent-free, tin-free, BPA-free and APEO-free. It is also non-irritant for skin and eyes. It i...weiterlesen UCECOAT® 2805 is a low viscosity, high performance UV/EB energy curable polyurethane dispersion suitable for indirect food contact applications. The product is solvent-free, tin-free, BPA-free and APEO-free. It is also non-irritant for skin and eyes. It is characterized by an extremely low mean particle size associated with a low viscosity and an outstanding colloidal stability alone or in the presence of pigments. It is tack-free and water redispersible after water evaporation but before cure. Its polymer composition was optimized for good coating performance and low migration potential after cure. verkürzen | Request Sample |
| M1250 ES Wollastocoat® | NYCO Minerals, Inc. | M1250 ES Wollastocoat® is an auxiliary pigment for water‐based acrylic/urethane coatings. It is recommended for corrosive improvement, synergistic effects and cost savings. | |
| VESTANAT® B 1186 A | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® B 1186 A is a caprolactam-blocked polyisocyanate. It offers low yellowing even at high curing temperatures, and is approved for direct food contact in interior can applications. This product is also recommended for heat-curing 1K PUR coatings. | Request Sample |
| Blendex 55 F | Ichemco | Blendex 55 F is a solvent-free, one-component moisture curing polyurethane adhesive. This product has a viscosity at 100°C of 750-1000 mPa.s. Blendex 55 F is most commonly used in fabric and film lamination applications. | |
| Unithane IC-805 | Union Specialties, Inc. | Unithane IC-805 is a NMP containing, medium hard, high gloss, APEO free, water-based polyurethane dispersion. This product has a gloss at 60º of 91 and a viscosity at 25°C of 100cps. It is suitable for use in a formulated topcoat for wood, metal, concrete...weiterlesen Unithane IC-805 is a NMP containing, medium hard, high gloss, APEO free, water-based polyurethane dispersion. This product has a gloss at 60º of 91 and a viscosity at 25°C of 100cps. It is suitable for use in a formulated topcoat for wood, metal, concrete, flooring, and graphic arts. verkürzen | |
| CN9215 | Sartomer Americas | CN9215 is an aliphatic urethane hexaacrylate for use in UV/EB curing compositions. It offers high reactivity, non yellowing, good chemical resistance and high gloss to formulations. This product is particularly suitable for industrial coatings and inks ap...weiterlesen CN9215 is an aliphatic urethane hexaacrylate for use in UV/EB curing compositions. It offers high reactivity, non yellowing, good chemical resistance and high gloss to formulations. This product is particularly suitable for industrial coatings and inks applications. verkürzen | |
| DM-831 | Quaker Color (a Division of McAdoo & Allen, Inc.) | DM-831, in the form of a milky anionic liquid, 831is a unique medium soft, inherently dull, co-solvent free, high performance aliphatic polyether polyurethane dispersion. It is for use in leather base coats, intermediate coats and leather topcoat applicat...weiterlesen DM-831, in the form of a milky anionic liquid, 831is a unique medium soft, inherently dull, co-solvent free, high performance aliphatic polyether polyurethane dispersion. It is for use in leather base coats, intermediate coats and leather topcoat applications where good flexibility, soft hand feel and lower gloss properties are required. verkürzen | |
| Isophorone Diisocyanate (IPDI) | Vencorex | Isophorone Diisocyanate (IPDI) is also known as monomeric cycloaliphatic diisocyanate. It is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD) showing exceptional weather...weiterlesen Isophorone Diisocyanate (IPDI) is also known as monomeric cycloaliphatic diisocyanate. It is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD) showing exceptional weathering resistance. verkürzen | |
| Borchi® Gen 0755 | OMG Borchers GmbH | Borchi® Gen 0755 is a solvent-free high molecular polyurethane polymer with excellent wetting and deflocculation properties systems. It improves pigment wetting, shortens the dispersion process and efficiently deflocculates pigments through sterical stabi...weiterlesen Borchi® Gen 0755 is a solvent-free high molecular polyurethane polymer with excellent wetting and deflocculation properties systems. It improves pigment wetting, shortens the dispersion process and efficiently deflocculates pigments through sterical stabilization. Due to the small particle size of the deflocculated pigments, excellent color strength and high gloss is achieved. This product prevents settling and re-flocculation even after prolonged storage of paints and pigment pastes. verkürzen | |
| Priplast™ 3188 - Polyester Polyol (Amorphous) | Croda Coatings & Polymers | Priplast™ 3188 is an amorphous polyester polyol building block for use in a wide variety of polyurethane systems. It offers hydrolytic stability and is suitable for cross-linked or 2K systems. | |
| Easaqua™ X D 401 | Vencorex | Easaqua™ X D 401 is a fast drying water-dispersible aliphatic polyisocyanate, supplied in n-butyl acetate. It does not contain any alkyl phenol ethoxylate. This product is suggested as a fast drying hardener of two-pack waterborne high-performance polyurethane...weiterlesen Easaqua™ X D 401 is a fast drying water-dispersible aliphatic polyisocyanate, supplied in n-butyl acetate. It does not contain any alkyl phenol ethoxylate. This product is suggested as a fast drying hardener of two-pack waterborne high-performance polyurethane coatings on various substrates, like wood, metal, and plastics. verkürzen | |
| LIOPUR PFL 3526 | Synthopol Chemie Germany | LIOPUR PFL 3242 is an aqueous aliphatic polyurethane dispersion based on polycarbonate. It is almost solvent-free, provided with intrinsic flame protection. After air-drying coatings based on LIOPUR PFL 3526 and suitable amount of butylglycole form transp...weiterlesen LIOPUR PFL 3242 is an aqueous aliphatic polyurethane dispersion based on polycarbonate. It is almost solvent-free, provided with intrinsic flame protection. After air-drying coatings based on LIOPUR PFL 3526 and suitable amount of butylglycole form transparent films which are tack-free and display good surface resistance, high flexibility and elasticity. Coatings based on LIOPUR PFL 3526 exhibit excellent flame protection properties. This product shows a good wet and dry appearance on wood. verkürzen | |
| EBECRYL® 8409 | Allnex | EBECRYL® 8409 is a low viscosity aliphatic urethane diacrylate that does not contain any intentionally added organic tin compounds. Films of EBECRYL® 8409 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness and excell...weiterlesen EBECRYL® 8409 is a low viscosity aliphatic urethane diacrylate that does not contain any intentionally added organic tin compounds. Films of EBECRYL® 8409 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness and excellent exterior durability. Low viscosity coatings or enhanced performance via increased oligomer content are possible with EBECRYL® 8409. Note that EBECRYL® 8409 typically develops a semi-crystalline aspect upon storage. For additional information, please refer to the Storage and Handling section. verkürzen | Request Sample |
| SiSiB® PC3100 | SiSiB SILICONES | SiSiB® PC3100 is a clear, light straw liquid. It is an epoxy functional silane. It can used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, in glass roving siz...weiterlesen SiSiB® PC3100 is a clear, light straw liquid. It is an epoxy functional silane. It can used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, in glass roving size-binders, as an adhesion-promoting additive in waterborne systems, to improve dry and wet strength in cured composites reinforced with glass fiber rovings, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. verkürzen | |
| Vilacryl 870X60 | Vil Resins | Vilacryl 870X60 is a 2-pack isocyanate curing acrylic resin that can be used in polyurethane coatings for metal or wood. This product contains 2.6% hydroxyls and 60% non-volatile compounds. | |
| Polurene LPI 433 | S.A.P.I.C.I. SpA | Polurene LPI 433 is a MDI polyether, 2K 100% solid content adhesive. This product has strong initial bond. It can be used in PVC, expanded polyurethane, and natural or synthetic fabrics. | |
| BYK®-3932 P | BYK | BYK®-3932 P is a special leveling additive with surface protective properties for powder coatings. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane, and acrylics. | |
| DESMOPHEN® VP LS 2089 | Covestro | A hydroxyl-bearing polyester used in combination with Desmodur N 75, N 3390 and N 3600 to formulate two component polyurethane coatings with good light stability, chalking resistance and gloss retention. | |
| BYK-011 | BYK | BYK-011 is a silicone-free, polymer-based defoamer for aqueous coating systems (also radiation curable systems). It is particularly recommended for two pack polyurethane systems and offers very good recoatability. | |
| Novares® LA 1000 | Rain Carbon Germany GmbH | Novares® LA 1000 is a high viscous liquid modifier with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing ...weiterlesen Novares® LA 1000 is a high viscous liquid modifier with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Best known applications are industrial and marine anti-corrosive paints based on epoxy and polyurethane. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. verkürzen | |
| Novares® LA 1900 | Rain Carbon Germany GmbH | Novares® LA 1900 is a high viscous liquid modifier with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing ...weiterlesen Novares® LA 1900 is a high viscous liquid modifier with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Best known applications are industrial and marine anti-corrosive paints based on epoxy and polyurethane. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. verkürzen | |
| TEGO® VariPlus 1201 TF | Evonik Operations GmbH, BL Coating Additives | TEGO® VariPlus 1201 TF is a solution of a polyurethane polyol resin for solventborne coatings and printing inks delivered in liquid form. Particularly for solventborne formulations, this product can be applied for flexo and gravure inks as well as wood an...weiterlesen TEGO® VariPlus 1201 TF is a solution of a polyurethane polyol resin for solventborne coatings and printing inks delivered in liquid form. Particularly for solventborne formulations, this product can be applied for flexo and gravure inks as well as wood and furniture coatings. TEGO® VariPlus 1201 TF improves hardness, gloss, and blocking resistance as well as the color strength of organic pigments and the adhesion on many plastics and aluminum. verkürzen | Request Sample |
| RHEOLATE® 210 | Elementis | RHEOLATE® 210 rheological additive is a VOC-free aqueous polyether polyurethane associative (NISAT) thickener. This rheology modifier can be used in waterborne low-VOC and VOC-free paint and coating systems. | Request Sample |
| Borchi® Kat 24 | OMG Borchers GmbH | Borchi® Kat 24 is a highly reactive tin-free catalyst based on metal carboxylate used as accelerator for solventborne one- and two-component polyurethane coatings and stoving enamels based on blocked isocyanates. It contains no additional organic complexi...weiterlesen Borchi® Kat 24 is a highly reactive tin-free catalyst based on metal carboxylate used as accelerator for solventborne one- and two-component polyurethane coatings and stoving enamels based on blocked isocyanates. It contains no additional organic complexing agents. This product is an ecologically safe replacement for other polyurethane catalysts, especially for amines and tin-based products like dibutyl tin dilaurate (DBTL). This product is particularly suitable for automotive refinish coatings, industrial coatings and also coil coatings formulated with blocked isocyanates. verkürzen | |
| EcoFlame APP203 | Unibrom Corp. | EcoFlame APP203 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, f...weiterlesen EcoFlame APP203 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP203 is also appropriate as acid donor for intumescent coatings and PU foams. It has a molecular weight of n>1000, a pH value of 7.5 to 8.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. verkürzen | |
| Novares® LA 300 | Rain Carbon Germany GmbH | Novares® LA 300 is a liquid low viscous modifier (300 - 400 mPas @ 25°C) with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a pla...weiterlesen Novares® LA 300 is a liquid low viscous modifier (300 - 400 mPas @ 25°C) with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Best known applications industrial paints and floor coatings based on epoxy and polyurethane. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. verkürzen | |
| Neboplast® PCU 6401 | NECARBO B.V. | Neboplast® PCU 6401 is an aliphatic polyurethane dispersion in water. This white liquid has abrasion and chemical resistance, high hardness, a low solvent content, and a high MFFT content. Neboplast® PCU 6401 produces a transparent, tack-free film and fin...weiterlesen Neboplast® PCU 6401 is an aliphatic polyurethane dispersion in water. This white liquid has abrasion and chemical resistance, high hardness, a low solvent content, and a high MFFT content. Neboplast® PCU 6401 produces a transparent, tack-free film and finds application in high quality water based two-component floor and furniture lacquers. verkürzen | |
| Capromer™ PD1–10 | BASF SE, Intermediates Division | Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydroly...weiterlesen Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. verkürzen | |
| Capromer™ PD1–20 | BASF SE, Intermediates Division | Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydroly...weiterlesen Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate verkürzen | |
| Impranil® DL 519 | Covestro | Impranil® DL 519 is an anionic aliphatic polyester-polyurethane dispersion, and is suitable for the formulation of textile coatings. This product is a co-solution-free finish product, has a high lightfastness, high scratch resistance, and a dry surface wi...weiterlesen Impranil® DL 519 is an anionic aliphatic polyester-polyurethane dispersion, and is suitable for the formulation of textile coatings. This product is a co-solution-free finish product, has a high lightfastness, high scratch resistance, and a dry surface with good sliding properties. This product has a viscosity at 23°C (D 40 s^-1) of < 1,200 mPa·s, a non-volatile content (0.9-1.1g / 1h / 125 °C, convection oven) of 40 ± 1%, and a pH of 7.5 ± 1.5. verkürzen | |
| Tolonate™ HDB | Vencorex | Tolonate™ HDB is a viscous solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate biuret (HDI homopolymer). It is suggested for use in two-component polyurethane coatings and varnishes and as an intermediate for prepolymer synthesis. Th...weiterlesen Tolonate™ HDB is a viscous solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate biuret (HDI homopolymer). It is suggested for use in two-component polyurethane coatings and varnishes and as an intermediate for prepolymer synthesis. This product is also recommended for exterior protective coatings for car repair, general industrial, plastics, and wood. verkürzen | |
| RESYDROL® AZ 6608w/43WA | Allnex | Resydrol® AZ 6608W/43WA is a water born, urethane modified polyester. It has extraordinary good stone chip resistance, excellent thermal yellowing stability, and good gloss. It is recommended for extremely flexible stoving enamels. | Request Sample |
| Capromer™ PD4-05 (PolyCLO DEG550) | BASF SE, Intermediates Division | Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties i...weiterlesen Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate. verkürzen | |
| Capromer™ PT1–05 (PolyCLO TMP540) | BASF SE, Intermediates Division | Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of ...weiterlesen Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates verkürzen | |
| EBECRYL® 4680 | Allnex | EBECRYL® 4680 is an aliphatic urethane acrylate diluted 20% by weight with 1,6-hexanediol diacrylate (HDDA)(1). It exhibits good reactivity and produces hard, tough coatings. EBECRYL® 4680 is designed for use in the formulation of UV/EB energy curable coa...weiterlesen EBECRYL® 4680 is an aliphatic urethane acrylate diluted 20% by weight with 1,6-hexanediol diacrylate (HDDA)(1). It exhibits good reactivity and produces hard, tough coatings. EBECRYL® 4680 is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet plastics and film. verkürzen | Request Sample |
| Tolonate™ HDB 75 M | Vencorex | Tolonate™ HDB 75 M is an aliphatic polyisocyanate biuret (HDI homopolymer) supplied at 75% solids in methoxypropyl acetate. It is used for conventional two component polyester/alkyd urethanes and polyurethane coatings with no aromatic solvents. This produ...weiterlesen Tolonate™ HDB 75 M is an aliphatic polyisocyanate biuret (HDI homopolymer) supplied at 75% solids in methoxypropyl acetate. It is used for conventional two component polyester/alkyd urethanes and polyurethane coatings with no aromatic solvents. This product is also recommended for high durability protective coatings for industrial maintenance and auto refinish applications. verkürzen | |
| Hauthane L-3121 | Hauthaway | Hauthane L-3121 is a soft, NMP-free, aliphatic, polycarbonate-based, polyurethane dispersion. It was designed primarily for use on flexible substrates as a coating, saturant or impregnant. L-3121 can be used as a sole vehicle or blended with acrylic emuls...weiterlesen Hauthane L-3121 is a soft, NMP-free, aliphatic, polycarbonate-based, polyurethane dispersion. It was designed primarily for use on flexible substrates as a coating, saturant or impregnant. L-3121 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. It may be thickened with associative thickeners for knife-over-roll or similar methods. verkürzen | |
| UCECOAT® 2806 | Allnex | UCECOAT® 2806 is a very low viscosity and high-performance UV/EB energy curable polyurethane dispersion suitable for indirect food contact applications. The product is solvent-free, tin-free, BPA-free and APEO- free. It is characterized by a low mean part...weiterlesen UCECOAT® 2806 is a very low viscosity and high-performance UV/EB energy curable polyurethane dispersion suitable for indirect food contact applications. The product is solvent-free, tin-free, BPA-free and APEO- free. It is characterized by a low mean particle size associated with an excellent colloidal stability alone and in the presence of pigments. Its polymer composition was optimized for high reactivity as well as low migration potential. It contains essentially oligomers and polymers having a molecular weight above 500 Daltons with acrylic double bound functionality equal to or greater than 6. It is easily water redispersible and tacky after water evaporation but before cure. verkürzen | Request Sample |
| Ithane 15 | Ichemco | Ithane 15 is an aromatic thermoplastic polyurethane in a dry granule form. This product has a Brookfield viscosity at 25°C of 100-200 cPs. Ithane 15 is most commonly used in flexible and rigid lacquer production applications. | |
| LIOPUR PFL 3046 | Synthopol Chemie Germany | LIOPUR PFL 3046 is an aqueous aliphatic polyurethane dispersion based on an oleochemical polyester. It is surfactant- and TEA-free. This product does not need any amount of cosolvents for film formation. Coatings based on LIOPUR PFL 3046 form tack-free, t...weiterlesen LIOPUR PFL 3046 is an aqueous aliphatic polyurethane dispersion based on an oleochemical polyester. It is surfactant- and TEA-free. This product does not need any amount of cosolvents for film formation. Coatings based on LIOPUR PFL 3046 form tack-free, transparent films with medium surface hardness after air drying with good flexibility and elasticity. LIOPUR PFL 3046 exhibits very good water resistance and good ethanol resistance. The dispersion is recommended for combination with Liocryl acrylic emulsions. verkürzen | |
| SYNTHOLUX BW 1896 | Synthopol Chemie Germany | SYNTHOLUX BW 1896 is an aqueous, aliphatic polyurethane dispersion, physically drying and UV-curable. It contains neither emulsifiers nor co-solvents. This product is recommended for applications where hardness, scratch resistances, adhesion and stain res...weiterlesen SYNTHOLUX BW 1896 is an aqueous, aliphatic polyurethane dispersion, physically drying and UV-curable. It contains neither emulsifiers nor co-solvents. This product is recommended for applications where hardness, scratch resistances, adhesion and stain resistances are necessary. It is also suitable for coatings for plastics, especially resilient flooring coatings based on PVC and linoleum. SYNTHOLUX BW 1896 can also used for plastic substrates as polycarbonate and PVC in automotive, audio/video, packaging and many other applications. verkürzen | |
| LIOPUR PFL 3242 | Synthopol Chemie Germany | LIOPUR PFL 3242 is an aqueous aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. It is partly biobased, solvent- and TEA-free. Films based on LIOPUR PFL 3242 are distinguished by high toughness and resilience and tear streng...weiterlesen LIOPUR PFL 3242 is an aqueous aliphatic polyurethane dispersion based on a polyester/polycarbonate combination. It is partly biobased, solvent- and TEA-free. Films based on LIOPUR PFL 3242 are distinguished by high toughness and resilience and tear strength. Owing to its very high abrasion resistance and its excellent chemical resistance, especially against coffee and mustard. LIOPUR PFL 3242 can be used in combination with water-emulsifiable polyisocyanates for airdrying, aqueous, 2-pack parquet floor varnishes. verkürzen | |
| SETATHANE® D E 2761 | Allnex | SETATHANE® D E 2761 is a Polyol emulsion used in combination with Desmodur® VL as a binder for thermal-shock resistant cementitious 3K-PUR- screed. | Request Sample |
| Hartben AM 29 | Benasedo | Hartben AM 29 is an Aliphatic-aromatic polyisocyanurate, with a butyl acetate solvent, and 60% solids. It has a free monomer of < 0.5%, an NCO of 10.4-10.8%, a colour [G.H.] maximum of 3, and a viscosity [G.H.] of O-R. Hartben AM 29 is used in polyurethan...weiterlesen Hartben AM 29 is an Aliphatic-aromatic polyisocyanurate, with a butyl acetate solvent, and 60% solids. It has a free monomer of < 0.5%, an NCO of 10.4-10.8%, a colour [G.H.] maximum of 3, and a viscosity [G.H.] of O-R. Hartben AM 29 is used in polyurethane coatings with good colour retention, gloss, toughness and hardness. It is recommended for metals and wood. verkürzen | Request Sample |
| BR 125 NPF | Arkema Rheology & Specialty Additives | BR 125 NPF is a polyurethane associative rheology modifier which gives formulations a unique Newtonian rheological profile characterised by a low viscosity at low shear rate and a high viscosity at high shear rate. The main applications for BR 125 NPF are...weiterlesen BR 125 NPF is a polyurethane associative rheology modifier which gives formulations a unique Newtonian rheological profile characterised by a low viscosity at low shear rate and a high viscosity at high shear rate. The main applications for BR 125 NPF are gloss emulsion paints, semi-gloss, flat dispersion paints. Formulation of anticorrosive paints or adhesives can also be based on BR 125 NPF. verkürzen | Request Sample |
| 2-Methylimidazole | BASF SE, Intermediates Division | 2-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Methylimidazole is used for two components epoxy systems; for the modification of epoxy resins and for the preparation of polyurethanes. | |
| GENOMER* 4230 | Rahn AG | GENOMER* 4230 is a difunctional aliphatic urethane acrylate for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4230 are soft, flexible and non-yellowing. It can be used as a modifier to improve the flexibility of finished formulat...weiterlesen GENOMER* 4230 is a difunctional aliphatic urethane acrylate for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4230 are soft, flexible and non-yellowing. It can be used as a modifier to improve the flexibility of finished formulations. This product is recommended for use in the following applications: coatings for metal and plastic; printing inks; laminating adhesives; and peroxide curing. verkürzen | Request Sample |
| GENOMER* 4302 | Rahn AG | GENOMER* 4302 is an aliphatic polyester triurethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: non yellowing coatings for plastics; non yellowing screen an...weiterlesen GENOMER* 4302 is an aliphatic polyester triurethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: non yellowing coatings for plastics; non yellowing screen and decor varnishes; paper and board coatings premiums; and industrial coatings. The product provides outstanding weatherability and mechanical properties. The product is used as the sole oligomer or in association with other urethane acrylates and acrylate monomers. verkürzen | Request Sample |
| Polurene LPI 407 | S.A.P.I.C.I. SpA | Polurene LPI 407is a MDI-based polyester/polyether blend 2K adhesive in ethyl acetate. This product has strong initial bond and can be used in PVC, polyurethane, and natural or synthetic fabrics. | |
| CN9250A75 | Sartomer Americas | CN9250A75 is a trifunctional aliphatic urethane acrylate, diluted in TPGDA, for use in ultra violet and electron beam curing compositions. It offers scratch resistance, good flexibility, high adhesion, and good pigment wetting. | |
| Unithane IC-100 | Union Specialties, Inc. | Unithane IC-100 is a NMP containing, medium hard, high gloss, APEO free, water-based polyurethane dispersion. This product has a gloss at 60° of 85 and a viscosity at 25°C of 100 cps. It is often used in a formulated topcoat for wood, metal, flooring, ink...weiterlesen Unithane IC-100 is a NMP containing, medium hard, high gloss, APEO free, water-based polyurethane dispersion. This product has a gloss at 60° of 85 and a viscosity at 25°C of 100 cps. It is often used in a formulated topcoat for wood, metal, flooring, inks, adhesives, and graphic arts. verkürzen | |
| SETALUX® D A 160 SN | Allnex | Setalux D A 160 SN polyisocyanate cross-linking acrylic resin used primarily in combination with Desmodur® N, in the formulation of two-component polyurethane coatings with good lightfastness and resistance to chalking. | Request Sample |
| Polurene LP 100 NFF | S.A.P.I.C.I. SpA | Polurene LP 100 NFF is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and does not release any nonyl-phenoles, which reduces its hazard classification. It can be used as an adhesive in improving t...weiterlesen Polurene LP 100 NFF is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and does not release any nonyl-phenoles, which reduces its hazard classification. It can be used as an adhesive in improving the flexibility of epoxy systems. verkürzen | |
| Bayhydur® 2858 XP | Covestro | Bayhydur® 2858 XP is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and isophorone diisocyanate (IPDI). It is used as a ready-to-use hardener for waterborne two-component polyurethane systems. | |
| Bayhydur® BL 5335 | Covestro | Bayhydur® BL 5335 is a hydrophilized, blocked aliphatic polyisocyanate based on Desmodur W. Used in combination with Bayhydrol grade OH-functional polymers for the formulation of lightfast, single-component polyurethane baking coatings. | |
| Desmodur® L 67 BA | Covestro | Desmodur® L 67 BA is an aromatic polyisocyanate based on tolulene diisocyanate used in combination with various Desmophen grades or other hydroxyl-bearing substances to formulate air-drying two-component polyurethane coatings. | |
| TRM-003 Rheology Modifier | Dalian Trimer Chemical Co., Ltd. | TRM-003 Rheology Modifier is a hydrophobically modified ethylene oxide urethane (HEUR) created for waterborne architectural and functional coatings. This product is used in acrylic and styrene-acrylic latexes in interior and exterior paints. It has a visc...weiterlesen TRM-003 Rheology Modifier is a hydrophobically modified ethylene oxide urethane (HEUR) created for waterborne architectural and functional coatings. This product is used in acrylic and styrene-acrylic latexes in interior and exterior paints. It has a viscosity between 1800 and 4000cp. verkürzen | |
| TRM-004 Rheology Modifier | Dalian Trimer Chemical Co., Ltd. | TRM-004 Rheology Modifier is a hydrophobically modified ethylene oxide urethane (HEUR) created for waterborne architectural and functional coatings. This product is used in acrylic and styrene-acrylic latexes in interior and exterior paints. It has a visc...weiterlesen TRM-004 Rheology Modifier is a hydrophobically modified ethylene oxide urethane (HEUR) created for waterborne architectural and functional coatings. This product is used in acrylic and styrene-acrylic latexes in interior and exterior paints. It has a viscosity between 2000 and 4000cp. verkürzen | |
| ECOPUD-54 | Ecopol Tech | ECOPUD-54 is an aqueous anionic dispersion of high molecular weight polyurethane, used as a raw material in the formulation of heat-activated adhesives for various applications, such as furniture, automotive, footwear, leather, cork, and the construction ...weiterlesen ECOPUD-54 is an aqueous anionic dispersion of high molecular weight polyurethane, used as a raw material in the formulation of heat-activated adhesives for various applications, such as furniture, automotive, footwear, leather, cork, and the construction industry. Due to its polymeric structure, ECOPUD-54 is particularly well-suited for applications involving plasticized PVC substrates. verkürzen | Request Sample |
| GENOMER* 4297 | Rahn AG | GENOMER* 4297 is an aliphatic urethane dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; UV adhesives; an...weiterlesen GENOMER* 4297 is an aliphatic urethane dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; UV adhesives; and printed circuit boards. The product improves resistance to solvents and chemicals. verkürzen | Request Sample |
| CN998B80 | Sartomer Americas | CN998B80 is a trifunctional aliphatic polyester urethane acrylate oligomer, diluted in HDDA for use in UV and EB curing compositions. This product is recommended for use in wood, furniture and flooring applications. | |
| Polurene AD 72 | S.A.P.I.C.I. SpA | Polurene AD 72 is a polyurethane adduct with low free TDI content. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols, and vinyl resins. It can be used in 2K varnishes and enamels. This product is highe...weiterlesen Polurene AD 72 is a polyurethane adduct with low free TDI content. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols, and vinyl resins. It can be used in 2K varnishes and enamels. This product is higher in hardness and reactivity than a traditional adduct. It contains less than .5% TDI isocyanates. verkürzen | |
| UCECOAT® 2807 | Allnex | UCECOAT® 2807 is a low-viscous high-performance energy curable polyurethane dispersion potentially suitable for indirect food contact applications if used in an optimized formulation and proper curing conditions are applied. Please contact us for more det...weiterlesen UCECOAT® 2807 is a low-viscous high-performance energy curable polyurethane dispersion potentially suitable for indirect food contact applications if used in an optimized formulation and proper curing conditions are applied. Please contact us for more details. The product is solvent-free, tin-free, BPA-free and APEOfree. Based on tests obtained on a structural analogue, it is also non-irritant for skin and eyes. It is characterized by a low mean particle size associated with a low viscosity and an outstanding colloidal stability when used as such or in the presence of pigments and additives. It is tack-free after water evaporation and before cure. Its composition was optimized for good coating performance and low migration after cure. verkürzen | Request Sample |
| LIOPUR PFL 2634 | Synthopol Chemie Germany | LIOPUR PFL 2634 is an aliphatic hydroxyl group containing polyurethane dispersion, stabilized with DMEA. Coatings based on LIOPUR PFL 2634 form tack-free, transparent films. It is suitable for 2C glass and plastic lacquers in combination with typical hard...weiterlesen LIOPUR PFL 2634 is an aliphatic hydroxyl group containing polyurethane dispersion, stabilized with DMEA. Coatings based on LIOPUR PFL 2634 form tack-free, transparent films. It is suitable for 2C glass and plastic lacquers in combination with typical hardeners like water dilutable polyisocyanates. Films of these two-component coatings exhibit very high pendulum hardness and excellent light resistance. This product is also suitable for one component stoving enamels in combination with suitable water-dilutable crosslinkers like melamine resins or blocked polyisocyanates. verkürzen | |
| Hauthane HD-2107 | Hauthaway | Hauthane HD-2107 is an aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-2107 ca...weiterlesen Hauthane HD-2107 is an aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. HD-2107 can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. verkürzen | |
| CN910A70 | Sartomer Americas | CN910A70 is a difunctional aliphatic urethane acrylate oligomer, supplied in TPGDA for use in UV and EB curing coatings, inks and adhesives. It is particularly used as the main binder in screen inks. | |
| EBECRYL® 6637 | Allnex | EBECRYL® 6637 is a mixture high molecular weight aliphatic urethane diacrylate resin in 20% of MMA (methyl methacrylate) monomer. It is characterized by light colour and low viscosity. Coatings based on EBECRYL® 6637 are characterized by improved flexibil...weiterlesen EBECRYL® 6637 is a mixture high molecular weight aliphatic urethane diacrylate resin in 20% of MMA (methyl methacrylate) monomer. It is characterized by light colour and low viscosity. Coatings based on EBECRYL® 6637 are characterized by improved flexibility and non-yellowing. verkürzen | Request Sample |
| Borchi® Gen SN 95 | OMG Borchers GmbH | Borchi® Gen SN 95 is a high-molecular weight, polyurethane-based wetting and dispersing additive with outstanding wetting and deflocculation properties. It is intended specifically for high-grade waterborne applications. lt effectively inhibits pigment re...weiterlesen Borchi® Gen SN 95 is a high-molecular weight, polyurethane-based wetting and dispersing additive with outstanding wetting and deflocculation properties. It is intended specifically for high-grade waterborne applications. lt effectively inhibits pigment re-flocculation, thereby stabilizing consistency, color intensity and shade, particularly during prolonged storage of finished paint and paste formulations. This product enhances the gloss and reduces the haze of finishing paints, contains no organic solvents whatsoever and is completely VOC-free. verkürzen | |
| Borchi® Gen 1251 | OMG Borchers GmbH | Borchi® Gen 1251 is a polyurethane oligomer with excellent wetting and deflocculation properties. This product is free of aromatic solvents. It improves pigment wetting, shortens dispersion process time and efficiently deflocculates pigments through steri...weiterlesen Borchi® Gen 1251 is a polyurethane oligomer with excellent wetting and deflocculation properties. This product is free of aromatic solvents. It improves pigment wetting, shortens dispersion process time and efficiently deflocculates pigments through sterical stabilization. Due to the small particle size of the deflocculated pigments excellent color strength and high gloss is achieved. Borchi® Gen 1251 is especially recommended for high quality industrial, automotive and automotive refinishing paints as well as for preparing pigment pastes. verkürzen | |
| Unithane IC-602 | Union Specialties, Inc. | Unithane IC-602 is a NMP containing, soft, low VOC, high gloss, APEO free, waterbased polyurethane dispersion that has coverage and flexibility properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 100cps. It is suitable for use in ...weiterlesen Unithane IC-602 is a NMP containing, soft, low VOC, high gloss, APEO free, waterbased polyurethane dispersion that has coverage and flexibility properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 100cps. It is suitable for use in a formulated basecoat for paints, interior and exterior coatings. verkürzen | |
| Unithane MP-611 NF | Union Specialties, Inc. | Unithane MP-611 NF is a NMP free, soft, inherently dull, APEO free, water-based polyurethane dispersion with automotive grade properties. This product has a gloss at 60º of 1.0 and a viscosity at 25°C of 800cps. It is designed for use in a formulated coat...weiterlesen Unithane MP-611 NF is a NMP free, soft, inherently dull, APEO free, water-based polyurethane dispersion with automotive grade properties. This product has a gloss at 60º of 1.0 and a viscosity at 25°C of 800cps. It is designed for use in a formulated coating for graphic arts, paints, automotive, and interior coatings. verkürzen | |
| Neboplast® PEU 3500 | NECARBO B.V. | Neboplast® PEU 3500 is an aliphatic polyurethane dispersion in water. This white liquid has abrasion, light, and chemical resistance, is solvent free, and provides surface hardness. Neboplast® PEU 3500 produces a tack-free, transparent film and finds appl...weiterlesen Neboplast® PEU 3500 is an aliphatic polyurethane dispersion in water. This white liquid has abrasion, light, and chemical resistance, is solvent free, and provides surface hardness. Neboplast® PEU 3500 produces a tack-free, transparent film and finds application in high performance coatings, and in transparent finishes for wood such as floor and furniture lacquers. verkürzen | |
| LIOPUR PFL 1130 | Synthopol Chemie Germany | LIOPUR PFL 1130 is an emulsifier-free, oil-modified aliphatic polyurethane dispersion. After air-drying, film coatings based on LIOPUR PFL 1130/30% form transparent films which are tack-free and exhibit very good surface hardness and scratch resistance. L...weiterlesen LIOPUR PFL 1130 is an emulsifier-free, oil-modified aliphatic polyurethane dispersion. After air-drying, film coatings based on LIOPUR PFL 1130/30% form transparent films which are tack-free and exhibit very good surface hardness and scratch resistance. LIOPUR PFL 1130/30% is suitable for the formulation of 1-pack wood paints which are sandable after one to two hours. LIOPUR PFL 1130/30% as sole binder and in combination with acrylate dispersions possess excellent chemical resistance and good abrasion resistance. verkürzen | |
| Tolonate™ IDT 70 B | Vencorex | Tolonate™ IDT 70 B is an aliphatic polyisocyanate based on Isophorone Diisocyanate trimer (IPDI homopolymer) supplied at 70% solids in butyl acetate. It is used for two-component polyurethane coatings and varnishes, showing an excellent weathering resista...weiterlesen Tolonate™ IDT 70 B is an aliphatic polyisocyanate based on Isophorone Diisocyanate trimer (IPDI homopolymer) supplied at 70% solids in butyl acetate. It is used for two-component polyurethane coatings and varnishes, showing an excellent weathering resistance. This product is also suitable for exterior protective coatings for automotive OEM and car repair, general industrial, plastics, and wood applications. verkürzen | |
| EBECRYL® 8405 | Allnex | EBECRYL® 8405 is an aliphatic urethane tetraacrylate diluted 20% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDODA). Films of EBECRYL® 8405 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, flexibility, ...weiterlesen EBECRYL® 8405 is an aliphatic urethane tetraacrylate diluted 20% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDODA). Films of EBECRYL® 8405 cured by ultraviolet light (UV) or electron beam (EB) combine abrasion resistance, flexibility, and adhesion with excellent exterior durability and resistance to yellowing. EBECRYL® 8405 is recommended for use in: automotive OEM or re-finish, coatings for wood and plastic requiring excellent exteriordurability, metal coatings, post-formable coatings for metal tube and conduit, optical coatings, non-yellowing topcoats for wood, pigmented coatings for wood, screen inks, and exterior durable coatings. verkürzen | Request Sample |
| CN925 | Sartomer Americas | CN925 is a low viscosity modified aliphatic urethane tetraacrylate for use in UV & EB curing coatings, inks, and adhesives. This product has excellent non-yellowing characteristics, low viscosity, solvent resistance, and hardness. | |
| Tolonate™ HDT 90 | Vencorex | Tolonate™ HDT 90 is an aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer) supplied at 90% solids in a blend of butyl acetate and aromatic hydrocarbon. It is used for high solids two-component polyurethane coatings and va...weiterlesen Tolonate™ HDT 90 is an aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer) supplied at 90% solids in a blend of butyl acetate and aromatic hydrocarbon. It is used for high solids two-component polyurethane coatings and varnishes. This product is also suggested for exterior protective coatings for automotive OEM, car repair, industrial machinery, and plastic parts. verkürzen | |
| EBECRYL® 4510 | Allnex | EBECRYL® 4510 is an isocyanate functional aliphatic urethane acrylate supplied at 90% solids in butyl acetate. It is useful as an adhesion promoter ultraviolet (UV) and electron beam (EB) energy curable coatings and in two-component dual cure coatings. It...weiterlesen EBECRYL® 4510 is an isocyanate functional aliphatic urethane acrylate supplied at 90% solids in butyl acetate. It is useful as an adhesion promoter ultraviolet (UV) and electron beam (EB) energy curable coatings and in two-component dual cure coatings. It can be combined with hydroxyl functional resins to formulate coatings which cure by dual processes; UV/EB induced polymerization and NCO/OH reaction. The product is also used in straight UV curing coatings to improve the adhesion on substrates as plastic, metal and exotic woods. verkürzen | Request Sample |
| IDROBEN PD 723 40% W | Benasedo | IDROBEN PD 723 40% W s a special fast air-drying polyurethane resin, modified with non yellowing drying Fatty Acids. It is suggested for formulating clear and pigmented enamels used in the General industrial and Decorative fields or for plastics (ABS, Pol...weiterlesen IDROBEN PD 723 40% W s a special fast air-drying polyurethane resin, modified with non yellowing drying Fatty Acids. It is suggested for formulating clear and pigmented enamels used in the General industrial and Decorative fields or for plastics (ABS, Polystyrene etc.) wood and metal substrates, endowed with Flexibility, adhesion, very good water and out door resistance. verkürzen | Request Sample |
| Hexamethylene Diisocyanate (HDI) | Vencorex | Hexamethylene Diisocyanate (HDI) is also known as monomeric aliphatic diisocyanate. It is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD) showing exceptional weathering...weiterlesen Hexamethylene Diisocyanate (HDI) is also known as monomeric aliphatic diisocyanate. It is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD) showing exceptional weathering resistance and flexibility. verkürzen | |
| DABCO® MB 20 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® MB 20 is a bismuth-based gel catalyst developed for a wide range of urethane formulations. It does not contain 2-EHA, DBT or TBT. | |
| DOUBLEMER® 520N | DBC Europe GmbH | DOUBLEMER® 520N is a deca(10)-functional aliphatic urethane acrylate oligomer. It is cured via exposure to ultraviolet light and electron beam. DOUBLEMER® 520N is designed for lithographic, screen, gravure, roll and curtain coating applications. | |
| Lacper® 4215 | Wanhua Chemical Group Co., Ltd. | Lacper® 4215 is an oil-modified polyurethane dispersion designed for the topcoat of wood finish, which is APEO, NMP, NEP and tin free. It can be used in floor, windows and frames. It contains approx. <1% triethylamine, biocide: CMIT/MIT 14ppm, MBIT 200ppm...weiterlesen Lacper® 4215 is an oil-modified polyurethane dispersion designed for the topcoat of wood finish, which is APEO, NMP, NEP and tin free. It can be used in floor, windows and frames. It contains approx. <1% triethylamine, biocide: CMIT/MIT 14ppm, MBIT 200ppm. This product offers excellent black heel resistance, rapid hardness development, and excellent scratch resistance. verkürzen | |
| Relca® HY-625 | Stahl Polymers | Relca® HY-625 is an aqueous anionic dispersion of an aliphatic polyester urethane. It is used in wood and parquet flooring, furniture coatings, and wood coatings. This product is solvent free, has good Taber abrasion resistance properties, good water resi...weiterlesen Relca® HY-625 is an aqueous anionic dispersion of an aliphatic polyester urethane. It is used in wood and parquet flooring, furniture coatings, and wood coatings. This product is solvent free, has good Taber abrasion resistance properties, good water resistance properties, good hydrolysis resistance properties, high hardness properties, and good adhesion properties with wood. verkürzen | |
| SYNTHALAT A 1633 | Synthopol Chemie Germany | SYNTHALAT A 1633 is an acrylic resin cross-linking with polyisocyanate. It is used in combination with aromatic and aliphatic polyisocyanates for fast drying 2-component polyurethane coatings, particularly suitable for coating furniture. | |
| Novalkyd S1216-60X | Novaresine S.r.l | Novalkyd S1216-60X is a modified saturated polyester resin that is characterized by excellent gloss retention, lightfastness, flexibility, and hardness. In combination with alyphatic isocyanates, this product is ideal for formulating polyurethane coatings...weiterlesen Novalkyd S1216-60X is a modified saturated polyester resin that is characterized by excellent gloss retention, lightfastness, flexibility, and hardness. In combination with alyphatic isocyanates, this product is ideal for formulating polyurethane coatings. verkürzen | |
| DESMODUR® E 2190 X | Covestro | An aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). Ideal for use as a raw material in the formulation of solvent-borne one-component polyurethane coatings which cure by reaction with atmospheric moisture. | |
| DESMODUR® VL | Covestro | An aromatic polyisocyanate based on diphenylmethane diisocyanate. Ideal for use in combination with suitable Desmophen grades in the formulation of solvent-free two-component polyurethane coatings, fillers, sealing compounds and synthetic resin mortars. | |
| Akuarane CRP SR 1310 | T&L Co., Ltd. Polymer Technology Centre | Akuarane CRP SR 1310 is a liquid, waterborne polyurethane dispersion that displays good corrosion and alkali resistance. This product is ideal for use in fluorine-based PUD (plastic, metal, and textile) coating applications. | |
| Akuarane CRP SR 1330 | T&L Co., Ltd. Polymer Technology Centre | Akuarane CRP SR 1330 is a liquid, waterborne polyurethane dispersion that displays good corrosion and alkali resistance. This product is ideal for use in fluorine-based PUD (plastic, metal, and textile) coating applications. | |
| Polydo GY-3500 | Kukdo Chemical Co., Ltd. | Polydo GY-3500 polyether polyol is a glycerine initiated, nominal 3,500 molecular weight triol based on propylene oxide. This polyol is used extensively in the production of conventional flexible polyurethane slab-stock foams. |
