| Aquaflow™ NHS-300E | Ashland | Aquaflow™ NHS-300E is a solvent-free, nonionic synthetic associative thickener designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build an...weiterlesen Aquaflow™ NHS-300E is a solvent-free, nonionic synthetic associative thickener designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build and favorable brush drag. This product is compatible with acrylic, styrene-acrylic, vinyl-acrylic, and vinyl acetate ethylene (VAE) latexes, and can be used in interior and exterior paint formulations. verkürzen | |
| Aquaflow™ NHS-350E | Ashland | Aquaflow™ NHS-350E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development...weiterlesen Aquaflow™ NHS-350E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build and favorable brush drag. It is intended to be used in combination with a low-shear effective NSAT (KU driver) for the optimal balance of Stormer (KU) and ICI viscosity. verkürzen | |
| Aquaflow™ NHS-360 | Ashland | Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most modern latex resin systems and all sheens. This thickener provi...weiterlesen Aquaflow™ NHS-360 rheology modifier is a high-shear effective, low VOC, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most modern latex resin systems and all sheens. This thickener provides highly efficient ICI viscosity development, excellent film build, optimal flow and leveling and favorable brush drag. verkürzen | |
| Aquaflow™ NLS-210 | Ashland | Aquaflow™ NLS-210 is a nonionic associative polymer solution designed to increase Stormer consistency and provide superior flow and leveling in waterborne paints and coatings. | |
| Aquaflow™ NLS-220E | Ashland | Aquaflow™ NLS-220E is a nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. This thickener is solvent free and is supplied as a low-viscosity liquid for eas...weiterlesen Aquaflow™ NLS-220E is a nonionic synthetic associative thickener (NSAT) that provides efficient thickening (Stormer KU) and superior flow and leveling in waterborne coatings. This thickener is solvent free and is supplied as a low-viscosity liquid for easy transfer and incorporation. It significantly reduces or eliminates latex agglomeration in paints containing vinyl-acrylic and vinyl acetate-ethylene latexes. verkürzen | |
| Aquaflow™ NMS-450E | Ashland | Aquaflow™ NMS-450E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all sheen levels. This product is designed to provide a b...weiterlesen Aquaflow™ NMS-450E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all sheen levels. This product is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as as the sole thickener in paint formulations based on hydrophobic resins, such as acrylics and styrene acrylics. verkürzen | |
| Aquaflow™ NMS-460E | Ashland | Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of S...weiterlesen Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as the sole thickener in many paint formulation based on hydrophobic resins, such as acrylics and styrene acrylics. With more hydrophilic resins, such as vinyl acetate ethylene (VAE), optimized rheology may be achieved with Aquaflow™ NMS-460E rheology modifier alone or in combination with a supplemental KU driver. verkürzen | |
| Aquaflow™ XLS-500E | Ashland | Aquaflow™ XLS-500E is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is highly effective with 100% acrylic and styrene-acrylic resin systems. This product provides an exceptional balance of l...weiterlesen Aquaflow™ XLS-500E is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is highly effective with 100% acrylic and styrene-acrylic resin systems. This product provides an exceptional balance of leveling and sag resistance when used in combination with a high shear effective NSAT. The optimized rheology modifier package will deliver superior leveling and sag resistance resulting in virtually drip-free application. verkürzen | |
| Aquaflow™ XLS-525E | Ashland | Aquaflow™ XLS-525E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is effective with most latex systems. This product provides an exceptional balance of leveling and sag r...weiterlesen Aquaflow™ XLS-525E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is effective with most latex systems. This product provides an exceptional balance of leveling and sag resistance when used in combination with a high-shear effective NSAT. The optimized rheology modifier package will deliver superior leveling and sag resistance resulting in virtually drip-free application. verkürzen | |
| Aquaflow™ XLS-530E | Ashland | Aquaflow™ XLS-530E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It imparts superior application properties including applied hiding, roller transfer and coverage. It impar...weiterlesen Aquaflow™ XLS-530E rheology modifier is a solvent-free nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It imparts superior application properties including applied hiding, roller transfer and coverage. It imparts a rich and creamy in-can feel and is effective with a wide range of latex chemistries, including styrene acrylic, acrylic, vinyl acrylic, and vinyl acetate ethylene (VAE). verkürzen | |
| BLANOSE™ Refined CMC | Ashland | BLANOSE™ Refined CMC is a water soluble polymer that acts as a thickener, rheology control agent, binder, stabilizer, protective colloid, film former and water retention aid for use in a variety of industrial applications. Supplied in various viscosity ra...weiterlesen BLANOSE™ Refined CMC is a water soluble polymer that acts as a thickener, rheology control agent, binder, stabilizer, protective colloid, film former and water retention aid for use in a variety of industrial applications. Supplied in various viscosity ranges. verkürzen | |
| Culminal™ C-types modified cellulose ethers | Ashland | Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plas...weiterlesen Culminal C-types cellulose ethers (CE) are especially designed methylcellulose derivatives, straight or modified with organic and inorganic additives. These series have been developed to improve the application and strength properties of gypsum based plasters, fillers, adhesives and spackling compounds, cement and lime based plasters, tile cements and similar products. verkürzen | |
| Culminal™ CT methylhydroxyethylcellulose | Ashland | Culminal™ CT methylhydroxyethylcellulose are cellulose ethers that, when dissolved in water, offer a variety of functional properties. They are powders, which are used as rheology modifiers, stabilizers, and water-retention agents in emulsion paints. | |
| CULMINAL™ Methylcellulose Derivatives | Ashland | CULMINAL™ Methylcellulose Derivatives are cellulose ethers that, when dissolved in water, offer a variety of functional properties. Culminal products are powders, they are used as thickeners, protective colloids, stabilizers, susp ending aids and water-re...weiterlesen CULMINAL™ Methylcellulose Derivatives are cellulose ethers that, when dissolved in water, offer a variety of functional properties. Culminal products are powders, they are used as thickeners, protective colloids, stabilizers, susp ending aids and water-retention agents in many industrial applications. verkürzen | |
| Dextrol™ OC-180 | Ashland | Dextrol™ OC-180 is the neutralized (potassium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. | |
| Dextrol™ OC-180HS Phosphate Ester Surfactant | Ashland | Dextrol™ OC-180HS surfactant is the neutralized (sodium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. Depending on the formulation specifics, this p...weiterlesen Dextrol™ OC-180HS surfactant is the neutralized (sodium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. Depending on the formulation specifics, this product can also function as a supplemental dispersant to assist in reduction of pigment flocculation. In addition to use in latex paint, Dextrol™ OC-180HS surfactant provides benefits in universal colorants, to help disperse and stabilize the pigments, thereby enhancing color acceptance of water-based paints. verkürzen | |
| Dextrol™ OC-60 | Ashland | Dextrol™ OC-60 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-6025 | Ashland | Dextrol™ OC-6025 is a ammonium hydroxide salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
| Dextrol™ OC-60EP | Ashland | Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...weiterlesen Dextrol™ OC-60EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-60EP surfactant can be neutralized using several organic or inorganic bases. Dextrol OC-60EP surfactant also imparts improved gloss and color acceptance in waterborne latex paints. verkürzen | |
| Dextrol™ OC-70 | Ashland | Dextrol™ OC-70 is the free-acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. | |
| Dextrol™ OC-70EP | Ashland | Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and stora...weiterlesen Dextrol™ OC-70EP phosphate ester surfactant is the free acid form of a tridecyl alcohol ethoxylated phosphate ester. It is an effective emulsifier in emulsion polymerization and provides the finished latex with low coagulum and improved handling and storage stability. Dextrol OC-70EP phosphate ester surfactant can be neutralized by the user using a number of organic or inorganic bases. verkürzen | |
| Dextrol™ OC-7525 | Ashland | Dextrol™ OC-7525 is a ammonium hydroxide salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties. | |
| Drew™ 210-694 | Ashland | Drew™ 210-694 is a foam control agent for use in coatings and printing inks. This product is particularly recommended for acrylate-based wood lacquers. Excellent results have also been obtained in acrylate-alkyd hybrid based industrial wood coatings. Drew...weiterlesen Drew™ 210-694 is a foam control agent for use in coatings and printing inks. This product is particularly recommended for acrylate-based wood lacquers. Excellent results have also been obtained in acrylate-alkyd hybrid based industrial wood coatings. Drew™ 210-694 is a highly efficient foam control agent with excellent persistency. verkürzen | |
| Drew™ 210-862 | Ashland | Drew™ 210-862 is a highly active foam control agent. It has been developed for use in water based coating systems that require a high level of (micro-) foam control under sever application conditions. Due to the high purity of the components used for form...weiterlesen Drew™ 210-862 is a highly active foam control agent. It has been developed for use in water based coating systems that require a high level of (micro-) foam control under sever application conditions. Due to the high purity of the components used for formulating Drew™ 210-862, this agent is also suitable for use in coating systems that require a high level of compliance with regards to food contact. verkürzen | |
| Drew™ 210-886 | Ashland | Drew™ 210-886 is a foam control agent, especially designed for use in surface coatings, overprint varnishes and the synthesis of polymer emulsions. Due to its high ease of incorporation, it has proven particularly suitable for low viscous coating systems ...weiterlesen Drew™ 210-886 is a foam control agent, especially designed for use in surface coatings, overprint varnishes and the synthesis of polymer emulsions. Due to its high ease of incorporation, it has proven particularly suitable for low viscous coating systems such as sealers and topcoats applied by flowcoat, dip, curtain coating or roller and brush. At elevated dosage levels, Drew™ 210-886 exhibits excellent performance in spray or airless spray applied high build topcoats. verkürzen | |
| Drew™ 210-903 | Ashland | Drew™ 210-903 is a 100% active product based on alcohols and polyols and is for use at temperatures about 55° C in application such as PVC synthesis and monomer stripping. At temperatures below 50° C, Drew™ 210-903 does not have any foam suppressing activ...weiterlesen Drew™ 210-903 is a 100% active product based on alcohols and polyols and is for use at temperatures about 55° C in application such as PVC synthesis and monomer stripping. At temperatures below 50° C, Drew™ 210-903 does not have any foam suppressing activity. verkürzen | |
| Drewplus™ L-1311E Foam Control Agent | Ashland | Drewplus™ L-1311E is a foam control agent based on mineral-oil technology designed for architectural paints and coatings. It provides excellent long-term foam control persistency, and prevents air entraining as well as the formation of micro and macro foa...weiterlesen Drewplus™ L-1311E is a foam control agent based on mineral-oil technology designed for architectural paints and coatings. It provides excellent long-term foam control persistency, and prevents air entraining as well as the formation of micro and macro foam on the paint film surface. This product is designed for use in a wide range of water-based systems and is particularly suitable for emulsion paints and plasters. verkürzen | |
| Drewplus™ L-1513 Foam Control Agent | Ashland | Drewplus™ L-1513 is a 100% active foam control agent designed specifically for use in water-based paint systems. Drewplus™ L-1513 is a high efficiency, hydrocarbon oil-based antifoaming agent, and is formulated to control foam at any point during manufact...weiterlesen Drewplus™ L-1513 is a 100% active foam control agent designed specifically for use in water-based paint systems. Drewplus™ L-1513 is a high efficiency, hydrocarbon oil-based antifoaming agent, and is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. Drewplus™ L-1513 foam control agent is readily dispersible and has an outstanding long-term foam control persistency. verkürzen | |
| Drewplus™ L-1600 Foam Control Agent | Ashland | Drewplus™ L-1600 foam control agent is a 100% active, high-efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or...weiterlesen Drewplus™ L-1600 foam control agent is a 100% active, high-efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. Drewplus™ L-1600 foam control agent is dispersible in a water-based coating system and provides outstanding initial and long-term foam control. verkürzen | |
| Drewplus™ L-1700 Foam Control Agent | Ashland | Drewplus™ L-1700 Foam Control Agent is a 100% active, high efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or...weiterlesen Drewplus™ L-1700 Foam Control Agent is a 100% active, high efficiency, hydrocarbon oil-based antifoaming agent. It is designed especially for use in water-based paint systems. It is formulated to control foam at any point during manufacture, packaging, or application of the paint. Its efficiency is not adversely affected by temperature or pH, and it is effective in the presence of many surfactants. This product is dispersible in a water-based coating system and provides outstanding initial and long-term foam control. verkürzen | |
| Drewplus* L-3500 Foam Control Agent | Ashland | Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spr...weiterlesen Drewplus* L-3500 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3500 is particularly recommended to prevent and control micro foam in both clearand pigmented industrial coatings which are applied by air spray, airless spray, air mix or HVLP. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. verkürzen | |
| Drewplus™ L-3510 Foam Control Agent | Ashland | Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatib...weiterlesen Drewplus* L-3510 is a 100% active foam control agent for use in water-based coatings. Drewplus* L-3510 foam control agent is particularly recommended for clear, non-pigmented industrial coatings. It exhibits a superb balance between activity and compatibility and is formulated with new hydrophobic polymer based active ingredients. verkürzen | |
| Drewplus™ S-4273 Foam Control Agent | Ashland | Drewplus™ S-4273 Foam Control Agent is designed for use in surface coatings and printing inks. This product is recommended for foam control in industrial wood coatings, semi-gloss, high-gloss architectural paints and adhesives. Excellent results have also...weiterlesen Drewplus™ S-4273 Foam Control Agent is designed for use in surface coatings and printing inks. This product is recommended for foam control in industrial wood coatings, semi-gloss, high-gloss architectural paints and adhesives. Excellent results have also been achieved in flexographic printing inks and overprint varnishes. verkürzen | |
| Drewplus™ S-4287 | Ashland | Drewplus™ S-4287 (formerly known as DREW 210-793) is a foam control agent for use in water based coatings. It is particularly recommended for high-gloss decorative paints. Excellent results have also been obtained in parquet lacquers. It also provides exc...weiterlesen Drewplus™ S-4287 (formerly known as DREW 210-793) is a foam control agent for use in water based coatings. It is particularly recommended for high-gloss decorative paints. Excellent results have also been obtained in parquet lacquers. It also provides excellent deaeration properties in low viscous (airless) sprayable systems. Drewplus™ S-4287 exhibits a superb balance between activity and compatibility and is highly efficient. It is a product with zero V.O.C. verkürzen | |
| Drewplus™ S-4288 Foam Control Agent | Ashland | Drewplus™ S-4288 foam control agent is a non-ionic proprietary formulation of surface active agents, silicones. it is designed for use in water-based coatings. Drewplus™ S-4288 foam control agent is recommended for high-gloss decorative paints. Excellent ...weiterlesen Drewplus™ S-4288 foam control agent is a non-ionic proprietary formulation of surface active agents, silicones. it is designed for use in water-based coatings. Drewplus™ S-4288 foam control agent is recommended for high-gloss decorative paints. Excellent results have also been obtained in parquet lacquers. Drewplus™ S-4288 foam control agent provides excellent deaeration properties in low viscous (airless) sprayable systems. Drewplus™ S-4288 foam control agent exhibits a superb balance between activity and compatibility and is highly efficient. verkürzen | |
| Drewplus™ S-4374 Foam Control Agent | Ashland | Drewplus™ S-4374 foam control agent is especially designed for use in surface coatings, overprint varnishes and pigmented inks. The product has proven particularly suitable for use in industrial wood coatings, applied by flow coat, dip, curtain coating or...weiterlesen Drewplus™ S-4374 foam control agent is especially designed for use in surface coatings, overprint varnishes and pigmented inks. The product has proven particularly suitable for use in industrial wood coatings, applied by flow coat, dip, curtain coating or spray; and also exhibits excellent performance in brush or roller applied wood coating systems. Drewplus™ S-4374 foam control agent is a 40 percent active emulsion of surface active agents and hydrophobes in water. verkürzen | |
| Drewplus™ S-4386 Foam Control Agent | Ashland | Drewplus™ S-4386 Foam Control Agent is a non-ionic aqueous emulsion of silica derivatives, silicones, and surfactants. It is formulated for use in water-based coatings, printing inks, graphic arts, wood coatings and high-gloss decorative paints. It is a h...weiterlesen Drewplus™ S-4386 Foam Control Agent is a non-ionic aqueous emulsion of silica derivatives, silicones, and surfactants. It is formulated for use in water-based coatings, printing inks, graphic arts, wood coatings and high-gloss decorative paints. It is a highly efficient foam control agent with fast performance, excellent persistency and compatibility. verkürzen | |
| Drewplus™ S-4480 Foam Control Agent | Ashland | Drewplus™ S-4480 foam control agent is a non-ionic blend of silicones and paraffinic oil. It is formulated for use in water-based coatings, particularly in clear systems. It is a highly efficient foam control agent with fast performance, excellent persist...weiterlesen Drewplus™ S-4480 foam control agent is a non-ionic blend of silicones and paraffinic oil. It is formulated for use in water-based coatings, particularly in clear systems. It is a highly efficient foam control agent with fast performance, excellent persistence and compatibility. Since it functions as an air-release agent, it is particularly effective on microfoam in spray-applied coatings. verkürzen | |
| Drewplus™ T-1201 Foam Control Agent | Ashland | Drewplus™ T-1201 is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201 is particularly recommended for SBR and acrylic emulsions. It may be used both...weiterlesen Drewplus™ T-1201 is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201 is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of polymer emulsions. verkürzen | |
| Drewplus™ T-1201E Foam Control Agent | Ashland | Drewplus™ T-1201E is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201E is particularly recommended for SBR and acrylic emulsions. It may be used bo...weiterlesen Drewplus™ T-1201E is a foam control agent for use in emulsion polymerisation processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-1201E is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of polymer emulsions. verkürzen | |
| Drewplus™ T-1202E Foam Control Agent | Ashland | Drewplus™ T-1202E is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Because of its excellent compatibility, Drewplus™ T-1202E is particularly recommended for SBR, PVA, Acrylic, PVC and nitrile rubber emulsions. | |
| Drewplus™ T-3200 Foam Control Agent | Ashland | Drewplus™ T-3200 is a foam control agent for use in coatings, emulsion polymerization processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-3200 is particularly recommended for SBR and acrylic emulsions. It may be...weiterlesen Drewplus™ T-3200 is a foam control agent for use in coatings, emulsion polymerization processes and pressure sensitive adhesives. Because of its excellent compatibility, Drewplus™ T-3200 is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of emulsions. Drewplus™ T-3200 is a non-ionic proprietary formulation of silica derivatives, paraffinic oil and esters. verkürzen | |
| Drewplus™ T-3211 Foam Control Agent | Ashland | Drewplus™ T-3211 is a foam control agent for use in coatings, emulsion polymerisation processes and adhesives. Excellent results have been achieved in acrylic paper coatings and pressure sensitive adhesives. Drewplus™ T-3211exhibits excellent foam control...weiterlesen Drewplus™ T-3211 is a foam control agent for use in coatings, emulsion polymerisation processes and adhesives. Excellent results have been achieved in acrylic paper coatings and pressure sensitive adhesives. Drewplus™ T-3211exhibits excellent foam control whilst not causing problems with surface wetting. Drewplus™ T-3211 is a 100% active, non-ionic proprietary formulation of silica derivatives, paraffinic oil and esters. verkürzen | |
| Drewplus™ T-4201 Foam Control Agent | Ashland | Drewplus™ T-4201 is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsio...weiterlesen Drewplus™ T-4201 is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsions. Drewplus™ T-4201 foam control agent is a 100- percent active, non-ionic proprietary formulation of silica derivatives, mineral oil and esters. verkürzen | |
| Drewplus™ T-4201E Foam Control Agent | Ashland | Drewplus™ T-4201E is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsi...weiterlesen Drewplus™ T-4201E is a foam control agent for use in coatings, emulsion polymerization processes and adhesives. Excellent performance is achieved in acrylic, PVA and natural adhesives. It is compatible with SBR, PVA, Acrylic, PVC and nitrile rubber emulsions. Drewplus™ T-4201E foam control agent is a 100- percent active, non-ionic proprietary formulation of silica derivatives, mineral oil and esters. verkürzen | |
| Drewplus™ T-4202E Foam Control Agent | Ashland | Drewplus™ T-4202E is a foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. | |
| Drewplus™ T-4303 | Ashland | Drewplus™ T-4303 is a 100% active foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. Drewplus™ ...weiterlesen Drewplus™ T-4303 is a 100% active foam control agent for use in coating and emulsion polymerization processes. Excellent results have been achieved in polyvinyl acetate-based systems, pressure sensitive adhesives and flexographic printing inks. Drewplus™ T-4303 is a non-ionic proprietary formulation of silica derivatives, mineral oil and esters. verkürzen | |
| Drewplus™ T-4500E Foam Control Agent | Ashland | Drewplus™ T-4500E is a foam control agent for use in coating and emulsion polymerization processes. It is particularly recommended for flat and semi-gloss decorative paints. | |
| Drewplus™ TS-2200 Foam Control Agent | Ashland | Drewplus™ TS-2200 is a foam control agent for use in coatings and emulsion polymerization processes. Because of its excellent compatibility, this product is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture...weiterlesen Drewplus™ TS-2200 is a foam control agent for use in coatings and emulsion polymerization processes. Because of its excellent compatibility, this product is particularly recommended for SBR and acrylic emulsions. It may be used both during the manufacture and application of these types of emulsions. verkürzen | |
| Drewplus™ TS-4384 Foam Control Agent | Ashland | Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-glos...weiterlesen Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss acrylic architectural paints, water- based parquet lacquers. Excellent results have also been obtained in acrylic anti- corrosive primers, flexographic printing inks and water-reducible alkyd based systems. Drewplus™ TS-4384 foam control agent is highly efficient and exhibits excellent persistency. verkürzen | |
| Drewplus™ TS-4385 Foam Control Agent | Ashland | Drewplus™ TS-4385 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss architectural paints and parquet lacquers. Excellent results have also been obtained...weiterlesen Drewplus™ TS-4385 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss architectural paints and parquet lacquers. Excellent results have also been obtained in acrylic anti-corrosive primers, flexographic printing inks and water-reducible alkyd based systems. This product is highly efficient and exhibits excellent persistence. verkürzen | |
| Drewplus™ TS-4387 Foam Control Agent | Ashland | Drewplus™ TS-4387 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for flexographic printing inks, overprint varnishes and wood lacquers. | |
| Drewplus™ TS-4481 Foam Control Agent | Ashland | Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and c...weiterlesen Drewplus™ TS-4481 Foam Control Agent is a non-ionic blend of silica derivatives, silicones and paraffinic oil. It is formulated for use in water-based coatings. It is a highly efficient foam control agent with fast performance, excellent persistence and compatibility. Since it functions as an air release agent it is particularly effective on microfoam in spray-applied industrial coatings. verkürzen | |
| Drewplus™ TS-4582 Foam Control Agent | Ashland | Drewplus™ TS-4582 is a foam control agent for use in surface coatings and printing inks. This product is particularly recommended for use in high gloss coatings, flexographic printing inks and overprint varnishes. | |
| Drewplus™ W-4510E Foam Control Agent | Ashland | Drewplus™ W-4510E is a 100% active foam control agent for use in coatings, printing inks and adhesives. Excellent results have been achieved in acrylic pressure sensitive adhesives. Drewplus™ W-4510E is a non-ionic proprietary formulation of wax derivativ...weiterlesen Drewplus™ W-4510E is a 100% active foam control agent for use in coatings, printing inks and adhesives. Excellent results have been achieved in acrylic pressure sensitive adhesives. Drewplus™ W-4510E is a non-ionic proprietary formulation of wax derivatives and mineral oil. verkürzen | |
| Jaypol™ AT1 | Ashland | Jaypol™ AT1 is an alkali soluble acrylic based associative thickener specifically designed for use in aqueous systems requiring a newtonian rheological behavior. It provides an excellent balance between high and low shear viscosities, and an excellent com...weiterlesen Jaypol™ AT1 is an alkali soluble acrylic based associative thickener specifically designed for use in aqueous systems requiring a newtonian rheological behavior. It provides an excellent balance between high and low shear viscosities, and an excellent compatibility with most organic and inorganic pigments and amongst other uses is particularly effective in silk and flat emulsion paints. verkürzen | |
| Jaypol™ AT2 | Ashland | Jaypol™ AT2, when compared with Jaypol™ AT1, provides more in-can viscosity, and is thus recommended for use in interior and exterior flat dispersion paints, where it imparts excellent rheological balance between high and low shear viscosities with low do...weiterlesen Jaypol™ AT2, when compared with Jaypol™ AT1, provides more in-can viscosity, and is thus recommended for use in interior and exterior flat dispersion paints, where it imparts excellent rheological balance between high and low shear viscosities with low dosage. verkürzen | |
| Jaypol™ AT4 | Ashland | Jaypol™ AT4 is an alkali swellable, acrylic-based, associative thickener which introduces high viscosity and thixotropy into water based paints and coatings. It imparts excellent film build whilst maintaining easy application properties. Furthermore, roll...weiterlesen Jaypol™ AT4 is an alkali swellable, acrylic-based, associative thickener which introduces high viscosity and thixotropy into water based paints and coatings. It imparts excellent film build whilst maintaining easy application properties. Furthermore, roller spatter is significantly reduced. verkürzen | |
| KLUCEL™ Hydroxypropylcellulose, Industrial Grade | Ashland | KLUCEL™ Hydroxypropylcellulose, Industrial Grade is a nonionic water-soluble cellulose ether combining organic solvent solubility, themoplasticity and surface activity with the thickening and stabilizing properties of other water-soluble cellulose polymer...weiterlesen KLUCEL™ Hydroxypropylcellulose, Industrial Grade is a nonionic water-soluble cellulose ether combining organic solvent solubility, themoplasticity and surface activity with the thickening and stabilizing properties of other water-soluble cellulose polymers. verkürzen | |
| Klucel™ MS Hydroxypropylcellulose | Ashland | Klucel™ MS is a grade of hydroxypropyl cellulose as a thickener and anti-sagging agent for inorganic zinc rich primers. This HPC technology enables a major improvement in dissolution speed in polar organic solvents, including methanol, isopropyl alcohol a...weiterlesen Klucel™ MS is a grade of hydroxypropyl cellulose as a thickener and anti-sagging agent for inorganic zinc rich primers. This HPC technology enables a major improvement in dissolution speed in polar organic solvents, including methanol, isopropyl alcohol and xylene. Furthermore, the thickening efficiency has significantly improved compared to conventional HPCs. verkürzen | |
| KLUCEL™ PR Hydroxypropylcellulose | Ashland | KLUCEL™ PR Hydroxypropylcellulose is a a non-ionic water-soluble cellulosic polymer. It is recommended for use as a thickener in paint and varnish removers are KLUCEL™ PR is specially tested for solubility and viscosity development in methylene chloride/...weiterlesen KLUCEL™ PR Hydroxypropylcellulose is a a non-ionic water-soluble cellulosic polymer. It is recommended for use as a thickener in paint and varnish removers are KLUCEL™ PR is specially tested for solubility and viscosity development in methylene chloride/methanol mixtures. verkürzen | |
| Natrosol™ 250 Hydroxyethylcellulose | Ashland | Natrosol™ 250 Hydroxyethylcellulose is a nonionic water-soluble cellulose ether. | |
| Natrosol™ B Hydroxyethylcellulose | Ashland | Natrosol™ B Hydroxyethylcellulose, a nonionic water-soluble polymer, is a white, free-flowing granular powder. It is insoluble in organic solvents, yet it is easily dispersed in cold and hot water to give solutions of varying viscosities. This product i...weiterlesen Natrosol™ B Hydroxyethylcellulose, a nonionic water-soluble polymer, is a white, free-flowing granular powder. It is insoluble in organic solvents, yet it is easily dispersed in cold and hot water to give solutions of varying viscosities. This product is used as a thickener, protective colloid, binder, stabilizer, and suspending agent, particularly in applications where a nonionic material is desired. verkürzen | |
| Natrosol™ FPS | Ashland | Natrosol™ FPS has high solids liquid suspensions designed for easy handling in conventional paint manufacturing equipment. | |
| Natrosol™ HE 10K | Ashland | Natrosol™ HE 10K is a highly efficient, nonionic polymer developed to provide rheology control of latex paints. It is the most pseudoplastic and therefore highest efficiency cellulose ether available in the market. It provides consistent thickening and ex...weiterlesen Natrosol™ HE 10K is a highly efficient, nonionic polymer developed to provide rheology control of latex paints. It is the most pseudoplastic and therefore highest efficiency cellulose ether available in the market. It provides consistent thickening and excellent package stability as well as offering less sensitivity to pH, surfactants, and other paint additives. verkürzen | |
| Natrosol™ HE 3KB | Ashland | Natrosol™ HE 3KB modified hydroxyethylcellulose (HEC) is a highly efficient, nonionic polymer developed to provide rheology control of latex paints. It exhibits excellent enzyme resistance. | |
| Natrosol™ Hydroxyethylcellulose | Ashland | Natrosol™ Hydroxyethylcellulose is a nonionic water-soluble polymer derived from cellulose and its solutions are unaffected by cations. It dissolves readily in cold or hot water and is used to produce solutions having a wide range of viscosity. | |
| Natrosol™ Performax | Ashland | Natrosol™ Performax has been the leading thickener for waterborne architectural coatings for more than 50 years. And now Natrosol™ Performax takes paint manufacturing to unprescedented levels of process flexibility and product quality by allowing the pain...weiterlesen Natrosol™ Performax has been the leading thickener for waterborne architectural coatings for more than 50 years. And now Natrosol™ Performax takes paint manufacturing to unprescedented levels of process flexibility and product quality by allowing the paint manufacturer to add HEC in a dry form at any point of the paint production process without lumping. verkürzen | |
| Natrosol™ Plus 330 HMHEC | Ashland | Natrosol™ Plus 330 hydrophobically modified hydroxyethylcellulose (HMHEC) is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer that contains both hydroxyethyl and long-chain alkyl group...weiterlesen Natrosol™ Plus 330 hydrophobically modified hydroxyethylcellulose (HMHEC) is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer that contains both hydroxyethyl and long-chain alkyl groups. This unique dual substitution differentiation this rheology modifier from unmodified cellulosics. verkürzen | |
| Natrosol™ Plus 330 PA 5075 | Ashland | Natrosol™ Plus 330 PA 5075 is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer, which is an advantage in latex paints. It has outstanding spatter resistance, enhanced brushing viscosit...weiterlesen Natrosol™ Plus 330 PA 5075 is an associative cellulosic polymer designed specifically for use in latex paints. It is a nonionic water-soluble polymer, which is an advantage in latex paints. It has outstanding spatter resistance, enhanced brushing viscosity, therefore better film build, improved levelling with good sag resistance, and excellent storage stability. verkürzen | |
| Natrosol™ Plus 550 HMHEC | Ashland | Natrosol™ Plus 550 hydrophobically modified hydroxyethylcellulose (HMHEC) is a highly efficient, nonionic associative cellulosic polymer developed to provide rheology control of latex paints. Natrosol™ Plus 550 exhibits excellent enzyme resistance and imp...weiterlesen Natrosol™ Plus 550 hydrophobically modified hydroxyethylcellulose (HMHEC) is a highly efficient, nonionic associative cellulosic polymer developed to provide rheology control of latex paints. Natrosol™ Plus 550 exhibits excellent enzyme resistance and imparts excellent creamy in-can feel and smooth flow characteristics to water-based latex paints and coatings. verkürzen | |
| pHLEX™ 400 | Ashland | pHLEX™ 400 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designe...weiterlesen pHLEX™ 400 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designed to replace ammonium hydroxide and other organoamine pH neutralizers. Significant odor reduction of the final paint formulation it typically achieved through the use of pHLEX™ 400 neutralizing agent, particularly when used in place of ammonium hydroxide. verkürzen | |
| pHLEX™ 410 | Ashland | pHLEX™ 410 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designe...weiterlesen pHLEX™ 410 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designed to replace ammonium hydroxide and other organoamine pH neutralizers. Significant odor reduction of the final paint formulation it typically achieved through the use of pHLEX™ 410 neutralizing agent, particularly when used in place of ammonium hydroxide. verkürzen | |
| PVP K-120 | Ashland | PVP K-120 is a polyvinylpyrrolidone that is considered to be physiologically inert and can be plasticized with water and most common organic plasticizers. Applications include use as a metal quenchant bath. | |
| PVP K-15 | Ashland | PVP K-15 is a hygroscopic, amorphous polymer supplied as a white, free-flowing powder. It can be plasticized with water and most common organic plasticizers. It is considered to be physiologically inert. This product is cross-linkable to a water insoluble...weiterlesen PVP K-15 is a hygroscopic, amorphous polymer supplied as a white, free-flowing powder. It can be plasticized with water and most common organic plasticizers. It is considered to be physiologically inert. This product is cross-linkable to a water insoluble, swellable material either in the course of vinylpyrrolidone polymerization, by addition of an appropriate multifunctional comonomer or by post-reaction, typically through hydrogen abstraction chemistry. PVP products are recommended for dishwashing, fabric care, household cleaning, and industrial and institutional cleaning applications. verkürzen | |
| PVP K-30 | Ashland | PVP K-30 is a hygroscopic, amorphous polymer supplied as a white, free-flowing powder. It can be plasticized with water and most common organic plasticizers. It is considered to be physiologically inert. This product is cross-linkable to a water insoluble...weiterlesen PVP K-30 is a hygroscopic, amorphous polymer supplied as a white, free-flowing powder. It can be plasticized with water and most common organic plasticizers. It is considered to be physiologically inert. This product is cross-linkable to a water insoluble, swellable material either in the course of vinylpyrrolidone polymerization, by addition of an appropriate multifunctional comonomer or by post-reaction, typically through hydrogen abstraction chemistry. PVP products are recommended for dishwashing, fabric care, household cleaning, and industrial and institutional cleaning applications. verkürzen | |
| PVP K-60 | Ashland | PVP K-60 is a polyvinylpyrrolidone that is considered to be physiologically inert and can be plasticized with water and most common organic plasticizers. | |
| Strodex™ FT-428 Surfactant | Ashland | Strodex™ FT-428 is a neutralized surfactant based on phosphate ester. It is designed to impart superior stability to latex paints, including mechanical as well as freeze-thaw stability. Depending on the formulation specifics, Strodex™ FT-428 surfactant ca...weiterlesen Strodex™ FT-428 is a neutralized surfactant based on phosphate ester. It is designed to impart superior stability to latex paints, including mechanical as well as freeze-thaw stability. Depending on the formulation specifics, Strodex™ FT-428 surfactant can also function as a strong wetting agent and dispersant aid and help reduce pigment flocculation. This product does not contain any alkyl phenol ethoxylates (APEOs). verkürzen | |
| Strodex™ FT-50K | Ashland | Strodex™ FT-50K is a low-foaming phosphate ester surfactant which enhances color development and reduces color float and rub-up. It acts as an auxiliary dispersant that reduces flocculation. | |
| Strodex™ PK-85NV Surfactant | Ashland | Strodex™ PK-85NV surfactant is the neutralized (potassium salt) form of a phosphate coester of aliphatic alcohols. It imparts improved substrate wetting, gloss, and color acceptance in waterborne latex paints. Depending on the formulation specifics, Strod...weiterlesen Strodex™ PK-85NV surfactant is the neutralized (potassium salt) form of a phosphate coester of aliphatic alcohols. It imparts improved substrate wetting, gloss, and color acceptance in waterborne latex paints. Depending on the formulation specifics, Strodex™ PK-85NV surfactant can also function as a supplemental dispersant to assist in reduction of pigment flocculation. This product does not contain any alkyl phenol ethoxylates (APEOs). verkürzen | |
| Strodex™ PK-90 | Ashland | Strodex™ PK-90 is the neutralized (potassium salt) form of a phosphate coester of aliphatic alcohols. It imparts improved gloss and color acceptance in water borne latex paints. | |
| Strodex™ TH-100 | Ashland | Strodex™ TH-100 is a surfactant that is the neutralized (potassium salt) form of a phosphate ester of aliphatic alcohol. It is designed to impart superior stability to latex paints, including mechanical stability as well as heat & freeze-thaw stability. ...weiterlesen Strodex™ TH-100 is a surfactant that is the neutralized (potassium salt) form of a phosphate ester of aliphatic alcohol. It is designed to impart superior stability to latex paints, including mechanical stability as well as heat & freeze-thaw stability. It can improve color float resistance in latex paint formulations. Depending on the formulation specifies, it can also function as a dispersant aid and help reduce pigment flocculation. verkürzen | |
| Gloss Lacquer Formula for Airless Spray Application (Formulation #07-1019B) | Ashland | Based on Neocryl* XK-98 acrylic glossy lacquer. | |
| Gloss Parquet Lacquer (Formulation #07-1020A) | Ashland | A gloss parquet lacquer based on Neopac* E106 Urethane/Acrylic copolymer. | |
| Gloss Stain Formula for Brush and Roller Application (Formulation #07-1059) | Ashland | This formulation utilizes Drewplus™ S-4386 Foam Control Agent, pHLEX™ 400, and Aquaflow™ NMS-460E. | |
| Gloss Stain Formula for Wood (Formulation #07-1069) | Ashland | PVC 0% - Resydrol* SF 8010w/50WA – Acrylic stain – Brush and roller applicable. | |
| High Build Exterior Masonry Coating (Formulation #07-1040B) | Ashland | PVC 50% - Pliotec LEB 18* low exudation binder exterior masonry coating. | |
| High Gloss White Coat Paint (Formulation #07-1021B) | Ashland | PVC 20% - Synaqua* 4804 alkyd emulsion high gloss white top coat. | |
| High Gloss White Top Coat - Higher Solids (Formulation #07-1022B) | Ashland | PVC 20% - Uradil* AZ 785-Z52 alkyd emulsion high gloss white top coat. | |
| High Gloss White Top Coat (Formulation #07-1023B) | Ashland | PVC 19% - Primal* HG 74D acrylic high gloss white paint. | |
| High Gloss White Top Coat (Formulation #07-1024B) | Ashland | PVC 19% - Primal* HG 74D - acrylic high gloss white top coat. | |
| High Gloss White Top Coat (Formulation #07-1025B) | Ashland | PVC 20% - Uradil* AZ 785-Z52 alkyd emulsion high gloss white top coat. | |
| High Gloss White Top Coat (Formulation #07-1030B) | Ashland | PVC 20 % - Synthalat* PWM 883 alkyd emulsion high gloss white top coat. | |
| High Gloss White Top Coat (Formulation #07-1075A) | Ashland | This PVC 20% - NeoPac PU 580 urethane alkyd emulsion high gloss white top coat features Aquaflow™ NHS-350E. | |
| Interior / Exterior Deeptone Base Paint (Formulation #07-1051) | Ashland | PVC 30% - glocryl* GR 1237 – pure acrylic deeptone base paint featuring aquaflow™ XLS-530E and aquaflow™ NHS-350E, nonionic synthetic associative thickeners (NSAT). | |
| Interior / Exterior Deeptone Base Paint (Formulation #07-1053) | Ashland | PVC 30% - makeean* M818 – pure acrylic deeptone base paint featuring aquaflow™ XLS-530E and aquaflow™ NHS-350E, nonionic synthetic associative thickeners (NSAT). | |
| Interior / Exterior Deeptone Base Paint (Formulation #07-1055) | Ashland | PVC 30% - acronal* S559 – styrene acrylic deeptone base paint featuring aquaflow™ NLS-220E and aquaflow™ NHS-300E, nonionic synthetic associative thickener (NSAT). | |
| Interior / Exterior Deeptone Base Paint (Formulation #07-1057) | Ashland | PVC 30% - acronal* S559 – styrene acrylic deeptone base paint featuring aquaflow™ XLS-530E and aquaflow™ NHS-300E, nonionic synthetic associative thickener (NSAT). | |
| Interior / Exterior Deeptone Semi Gloss Paint (Formulation #07-1018B) | Ashland | PVC 43% - Acronal* S559 styrene acrylic deeptone semi-gloss paint. | |
| Interior & Exterior Plaster (Formulation #07-1067) | Ashland | Based on Mowilith* LDM 1865 Vinyl Acetate/Ethylene emulsion; Interior & Exterior White Plaster. |
