Borchi® Gol 3451 | OMG Borchers GmbH | Borchi® Gol 3451 prevents levelling / flowing resulting in surface structures, used for creating special effects such as hammer-finish. Recoatability is not recommended with this product. It can be used in virtually all binder systems. | |
CERAFLOUR® 914 | BYK | CERAFLOUR® 914 is a micronized wax for perfect optic and haptic surface characteristics of water-borne and solvent-borne coating systems. It is composed of micronized polypropylene waxes. This product provides homogeneous and reproducible texture effects. | |
CERAFLOUR® 915 | BYK | CERAFLOUR® 915 is a micronized wax for perfect optic and haptic surface characteristics of water-borne and solvent-borne coating systems. This product is suitable for all types of solvent- and water-borne coating systems applied on metal, wood and plasti...weiterlesen CERAFLOUR® 915 is a micronized wax for perfect optic and haptic surface characteristics of water-borne and solvent-borne coating systems. This product is suitable for all types of solvent- and water-borne coating systems applied on metal, wood and plastic substrates to obtain textured surfaces. It also provides homogeneous and reproducible texture effects. verkürzen | |
CERAFLOUR® 916 | BYK | CERAFLOUR® 916 is a micronized wax for perfect optic and haptic surface characteristics of water-borne and solvent-borne coating systems. It is a micronized modified HD polyethylene wax / polymer mixture. This product is suitable for all types of solvent-...weiterlesen CERAFLOUR® 916 is a micronized wax for perfect optic and haptic surface characteristics of water-borne and solvent-borne coating systems. It is a micronized modified HD polyethylene wax / polymer mixture. This product is suitable for all types of solvent- and water-borne coating systems applied on metal, wood and plastic substrates to obtain textured surfaces. verkürzen | |
CERAFLOUR® 967 | BYK | CERAFLOUR® 967 is a structure additive for powder coatings. This white powder is composed of a synthetic polymer. This product is used for coarse surface texturing of powder coatings. By adding metallic pigments, uniform hammer tone or antique finishes ca...weiterlesen CERAFLOUR® 967 is a structure additive for powder coatings. This white powder is composed of a synthetic polymer. This product is used for coarse surface texturing of powder coatings. By adding metallic pigments, uniform hammer tone or antique finishes can be achieved. It is distinguished by the following properties: homogeneous and reproducible surface structure effects, is a very compatible polymer for powder coatings, provides excellent separation of metallic pigments in hammer tone and antique powder coatings. verkürzen | |
CERAFLOUR® 968 | BYK | CERAFLOUR® 968 is an efficient additive used to achieve homogeneous fine structures. It is composed of micronized PTFE modified polyethylene wax. This product is used in all common powder coating systems to achieve fine and very reproducible surface textu...weiterlesen CERAFLOUR® 968 is an efficient additive used to achieve homogeneous fine structures. It is composed of micronized PTFE modified polyethylene wax. This product is used in all common powder coating systems to achieve fine and very reproducible surface texturing. The additive creates homogeneous textures even when the film thickness varies. verkürzen | |
CERAFLOUR® 969 | BYK | CERAFLOUR® 969 is an efficient additive used to achieve homogeneous fine structures. It is composed of micronized PTFE modified polyethylene wax. This product is used in all common powder coating systems to achieve fine and very reproducible surface textu...weiterlesen CERAFLOUR® 969 is an efficient additive used to achieve homogeneous fine structures. It is composed of micronized PTFE modified polyethylene wax. This product is used in all common powder coating systems to achieve fine and very reproducible surface texturing. The additive creates homogeneous textures even when the film thickness varies. verkürzen | |
Deuteron ST | Deuteron | Deuteron ST texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and op...weiterlesen Deuteron ST texturing agent can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. The Deuteron ST product line can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction. The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. Depending on the duration of exposure to heat, the texturing agents are thermally stable to well over 200 °C. The products do not melt which distinguishes them from wax and amide-based products. The texturing agents are resistant to most customary solvents. verkürzen | Request Sample |
Deuteron ST100 | Deuteron | Deuteron ST100 is a coarse powder for producing significant surface texturing. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder. This allows the haptical, optical and functional propert...weiterlesen Deuteron ST100 is a coarse powder for producing significant surface texturing. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder. This allows the haptical, optical and functional properties of a surface to be tailored to specific applications. Deuteron ST100 can be used in both solvent-based and solvent-free coatings, and also in water-based coating systems. The areas of application include decorative coatings and anti-slip coatings. verkürzen | Request Sample |
Deuteron ST125 | Deuteron | Deuteron ST125 is a coarse powder for producing significant surface texturing. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder. This allows the haptical, optical and functional propert...weiterlesen Deuteron ST125 is a coarse powder for producing significant surface texturing. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder. This allows the haptical, optical and functional properties of a surface to be tailored to specific applications. Deuteron ST125 can be used in both solvent-based and solvent-free coatings, and also in water-based coating systems. The areas of application include decorative coatings and anti-slip coatings. verkürzen | Request Sample |
Deuteron ST250 | Deuteron | Deuteron ST250 is a coarse powder for producing significant surface texturing. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder. This allows the haptical, optical and functional propert...weiterlesen Deuteron ST250 is a coarse powder for producing significant surface texturing. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder. This allows the haptical, optical and functional properties of a surface to be tailored to specific applications. Deuteron ST250 can be used in both solvent-based and solvent-free coatings, and also in water-based coating systems. The areas of application include decorative coatings and anti-slip coatings. verkürzen | Request Sample |
Deuteron ST50 | Deuteron | Deuteron ST50 is a coarse powder for producing significant surface texturing. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder. This allows the haptical, optical and functional properti...weiterlesen Deuteron ST50 is a coarse powder for producing significant surface texturing. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder. This allows the haptical, optical and functional properties of a surface to be tailored to specific applications. Deuteron ST50 can be used in both solvent-based and solvent-free coatings, and also in water-based coating systems. The areas of application include decorative coatings and anti-slip coatings. verkürzen | Request Sample |
Deuteron ST500 | Deuteron | Deuteron ST500 is a coarse powder for producing extremely distinct surface textures. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder. Deuteron ST500 can be used in both solventbased an...weiterlesen Deuteron ST500 is a coarse powder for producing extremely distinct surface textures. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder. Deuteron ST500 can be used in both solventbased and solvent-free coatings, and also in waterbased coating systems. Areas of application are mainly functional coatings, e.g. anti-slip coatings. Decorative coatings are also possible. verkürzen | Request Sample |
DOWSIL™ 61 Paint Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 61 Paint Additive is a silicone hammertone additive. It is intended Intended primarily for solvent based paints, but can be incorporated into some water-borne systems. Addition levels are critical and have to be carefully determined for each ...weiterlesen Dow Corning® 61 Paint Additive is a silicone hammertone additive. It is intended Intended primarily for solvent based paints, but can be incorporated into some water-borne systems. Addition levels are critical and have to be carefully determined for each product; care must also be taken to avoid contamination of other non-hammertone verkürzen | |
Dynoadd® P-506 | Dynoadd by Dynea | Dynoadd® P-506 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...weiterlesen Dynoadd® P-506 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-506 has a particle size of 6 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. verkürzen | Request Sample |
Dynoadd® P-510 | Dynoadd by Dynea | Dynoadd P-510® is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...weiterlesen Dynoadd P-510® is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-510 has a particle size of 10 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. verkürzen | Request Sample |
Dynoadd® P-515 | Dynoadd by Dynea | Dynoadd® P-515 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...weiterlesen Dynoadd® P-515 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-515 has a particle size of 15 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. verkürzen | Request Sample |
Dynoadd® P-520 | Dynoadd by Dynea | Dynoadd® P-520 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...weiterlesen Dynoadd® P-520 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-520 has a particle size of 20 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. verkürzen | Request Sample |
Dynoadd® P-530 | Dynoadd by Dynea | Dynoadd® P-530 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...weiterlesen Dynoadd® P-530 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-530 has a particle size of 30 microns. The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. verkürzen | Request Sample |
Dynoadd® P-540 | Dynoadd by Dynea | Dynoadd® P-540 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lowe...weiterlesen Dynoadd® P-540 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Dynoadd® P-540 has a particle size of 40 microns.The particles can be used in solvent-borne, water-borne and radcure coating formulations. Typical applications are coil coatings, domestic appliances, cosmetics packaging, mobile phones, automotive interior, machinery housing, wood coatings, and optical coatings. verkürzen | Request Sample |
METOLAT® 150/100 | Munzing Chemie | METOLAT® 150/100 is a clear liquid based on silicone oil (APEO-free). METOLAT® 150/100 is an additive for all common solvent systems. It aids in eliminating pinholes, effective in air-drying and stoving paints, and is specifically chosen for use with EDAP...weiterlesen METOLAT® 150/100 is a clear liquid based on silicone oil (APEO-free). METOLAT® 150/100 is an additive for all common solvent systems. It aids in eliminating pinholes, effective in air-drying and stoving paints, and is specifically chosen for use with EDAPLAN® LA 106 HF. verkürzen | |
PowderTEX 61 (PTFE Powder) | Shamrock Technologies b.v.b.a. | PowderTEX 61 is a PTFE (polytetrafluoroethylene) powder that has been treated with a higher surface area inert spacer to facilitate ease of handling. PowderTEX 61 is used in baked coatings for powder systems. | |
PowderTEX 94 (PTFE Powder) | Shamrock Technologies b.v.b.a. | PowderTEX 94 is a PTFE (polytetrafluoroethylene) powder that has been treated with a higher surface area inert spacer to facilitate ease of handling. PowderTEX 94 is used in both air dry and baked coatings for solvent and aqueous systems. | |
Raybo 66 AquaHamR | Raybo Chemical | Raybo 66 AquaHamR is a silicone-based hammer additive in a cloudy liquid form. This product is most commonly used to provide reproducible hammer patterns in solvent-based paint applications. | |
Raybo 88 HamR | Raybo Chemical | Raybo 88 HamR is a silicone-based hammer additive in a clear liquid form. This product is most commonly used to provide hammertone patterns in non-leafing solvent-based aluminum coating system applications. | |
Texture 5374W (Polyethylene Powder) | Shamrock Technologies b.v.b.a. | Texture 5374W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 28 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in...weiterlesen Texture 5374W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 28 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in solvent, aqueous, and UV systems. verkürzen | |
Texture 5378W (Polyethylene Powder) | Shamrock Technologies b.v.b.a. | Texture 5378W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 35 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in...weiterlesen Texture 5378W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 35 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in solvent, aqueous, and UV systems. verkürzen | |
Texture 5380W (Polyethylene Powder) | Shamrock Technologies b.v.b.a. | Texture 5380W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 50 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in...weiterlesen Texture 5380W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 50 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in solvent, aqueous, and UV systems. verkürzen | |
Texture 5382W (Polyethylene Powder) | Shamrock Technologies b.v.b.a. | Texture 5382W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 65 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in...weiterlesen Texture 5382W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 65 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in solvent, aqueous, and UV systems. verkürzen | |
Texture 5384W (Polyethylene Powder) | Shamrock Technologies b.v.b.a. | Texture 5384W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 80 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in...weiterlesen Texture 5384W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 80 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in solvent, aqueous, and UV systems. verkürzen | |
Texture 5386W (Polyethylene Powder) | Shamrock Technologies b.v.b.a. | Texture 5386W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 110 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used i...weiterlesen Texture 5386W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 110 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in solvent, aqueous, and UV systems. verkürzen | |
Texture 5388W (Polyethylene Powder) | Shamrock Technologies b.v.b.a. | Texture 5388W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 150 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used i...weiterlesen Texture 5388W is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 150 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in solvent, aqueous, and UV systems. verkürzen | |
Texture Ultrafine (Polyethylene Powder) | Shamrock Technologies b.v.b.a. | Texture Ultrafine is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 165 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be us...weiterlesen Texture Ultrafine is a high melt viscosity, crystalline polyethylene powder with a mean particle size of 165 microns. The Texture Series can be used in air dry and baked coatings and are compatible in all types of liquid coatings. These products can be used in solvent, aqueous, and UV systems. verkürzen | |
VANSIL® CK-20 | Vanderbilt Minerals, LLC | VANSIL® CK-20 is a grade of wollastonite (calcium metasilicate) which disperses to 0 to 1 Hegman fineness. This product is useful as an extender in high-build coatings such as block fillers and texture paints. | |
VANSIL® HR-1500 | Vanderbilt Minerals, LLC | VANSIL® HR-1500 is a high aspect ratio, short needle (acicular) grade of wollastonite (calcium metasilicate) that is principally used as a functional filler to enhance mechanical strength properties in coatings. This product improves mud crack resistance...weiterlesen VANSIL® HR-1500 is a high aspect ratio, short needle (acicular) grade of wollastonite (calcium metasilicate) that is principally used as a functional filler to enhance mechanical strength properties in coatings. This product improves mud crack resistance in texture coatings and is used to reinforce epoxy and other resin-based adhesives. verkürzen | |
VANSIL® HR-2000 | Vanderbilt Minerals, LLC | VANSIL® HR-2000 is a high aspect ratio, short needle (acicular) grade of wollastonite (calcium metasilicate) that is principally used as a functional filler to enhance mechanical strength properties in coatings. This product improves mud crack resistance ...weiterlesen VANSIL® HR-2000 is a high aspect ratio, short needle (acicular) grade of wollastonite (calcium metasilicate) that is principally used as a functional filler to enhance mechanical strength properties in coatings. This product improves mud crack resistance in texture coatings and is used to reinforce epoxy and other resin-based adhesives. verkürzen | |
VANSIL® WG | Vanderbilt Minerals, LLC | VANSIL® WG is a high aspect ratio, long needle (acicular) grade of wollastonite (calcium metasilicate) principally used as a reinforcing agent to enhance mechanical strength properties in coatings. This product improves mud crack resistance in texture coa...weiterlesen VANSIL® WG is a high aspect ratio, long needle (acicular) grade of wollastonite (calcium metasilicate) principally used as a reinforcing agent to enhance mechanical strength properties in coatings. This product improves mud crack resistance in texture coatings and is used to reinforce epoxy and other resin-based adhesives. verkürzen |