| PHENODUR® VPW 1942/52WA | Allnex | PHENODUR® VPW 1942/52WA is a formulated phenolic/epoxide system, intended as sole-binder for the interior and exterior coating of metallic packaging materials and for corrosion resistant industrial stoving systems. | Request Sample |
| 2-Ethylimidazole | BASF SE, Intermediates Division 巴斯夫中间体 | 2-Ethylimidazole is a selective catalyst for epoxy and urethanes reactions. 2-Ethylimidazole is used for two components epoxy systems; for modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Methylimidazole | BASF SE, Intermediates Division 巴斯夫中间体 | 2-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Methylimidazole is used for two components epoxy systems; for the modification of epoxy resins and for the preparation of polyurethanes. | |
| 1,2-Dimethylimidazole, Lupragen DMI | BASF SE, Intermediates Division 巴斯夫中间体 | 1,2-Dimethylimidazole, Lupragen DMI is a selective catalyst for epoxy and urethanes reactions. 1,2-Dimethylimidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Ethyl-4-Methylimidazole | BASF SE, Intermediates Division 巴斯夫中间体 | 2-Ethyl-4-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Ethyl-4-methylimidazole is used for two components epoxy systems, for the modification of epoxy resins and for preparation of polyurethanes. | |
| Imidazole | BASF SE, Intermediates Division 巴斯夫中间体 | Imidazole is a catalyst for epoxy reactions, blocking agent for polyisocyanates. Imidazole is used as catalyst for the modification of epoxy resins and for two components epoxy systems. It is suitable as a blocking agent for polyisocyanates in powder coa...weiterlesen Imidazole is a catalyst for epoxy reactions, blocking agent for polyisocyanates. Imidazole is used as catalyst for the modification of epoxy resins and for two components epoxy systems. It is suitable as a blocking agent for polyisocyanates in powder coatings. verkürzen | |
| ADDITOL® VXW 6235 | Allnex | ADDITOL® VXW 6235 is a foam retardant that is mainly recommended for powder coating materials to be used in aqueous systems such as: emulsion paints, 2-component epoxy systems, plasterwork, filling compounds and scalants, flooring compounds, and adhesives...weiterlesen ADDITOL® VXW 6235 is a foam retardant that is mainly recommended for powder coating materials to be used in aqueous systems such as: emulsion paints, 2-component epoxy systems, plasterwork, filling compounds and scalants, flooring compounds, and adhesives. verkürzen | Request Sample |
| ANCAREZ® AR555 Waterborne Epoxy Resin | Evonik Operations GmbH, BL Crosslinkers | ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to con...weiterlesen ANCAREZ® AR555 Waterborne Epoxy Resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for use in two-component, ambient-cure epoxy systems. It delivers superior performance at lower cost when compared to conventional solid resin dispersions. The unique nature of this product allows film formulation without high levels of coalescing solvent, which enables the formulation of low-odor, zero-VOC systems. verkürzen | Request Sample |
| KEPERPOL®-809 | Kito Chem | KEPERPOL®-809 is a super silicone anti-foaming agent made of a fluorine carbon modified polysiloxane solution. It is a colorless to light yellow transparent liquid can be used in a wide range of systems including high viscosity systems such as epoxy syste...weiterlesen KEPERPOL®-809 is a super silicone anti-foaming agent made of a fluorine carbon modified polysiloxane solution. It is a colorless to light yellow transparent liquid can be used in a wide range of systems including high viscosity systems such as epoxy systems. This additive is well suited for use in the production of solvent free coatings, inks, epoxy potting glue, epoxy floor paints etc. verkürzen | |
| DISPERBYK®-142 | BYK 毕克 | DISPERBYK®-142 is a high molecular weight wetting and dispersing additive for solvent-borne systems. It is a solution of a phosphoric ester salt of a high molecular weight copolymer with pigment affinic groups. This product displays excellent compatibilit...weiterlesen DISPERBYK®-142 is a high molecular weight wetting and dispersing additive for solvent-borne systems. It is a solution of a phosphoric ester salt of a high molecular weight copolymer with pigment affinic groups. This product displays excellent compatibility with all common paint binders. As a special note, for epoxy systems, DISPERBYK®-142 displays superb compatibility. verkürzen | |
| N-(3-Aminopropyl)-imidazole, Lupragen® API | BASF SE, Intermediates Division 巴斯夫中间体 | N-(3-Aminopropyl)-imidazole, Lupragen® API is a selective catalyst for epoxy and urethanes reactions, building block for special segmented polymers (e. g. polyurethanes). N-(3-Aminopropyl)-imidazole is used for two components epoxy systems and for modifi...weiterlesen N-(3-Aminopropyl)-imidazole, Lupragen® API is a selective catalyst for epoxy and urethanes reactions, building block for special segmented polymers (e. g. polyurethanes). N-(3-Aminopropyl)-imidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. When forming urethanes or ureas, N-(3-aminopropyl)-imidazole is incorporated into the polymer structure and improves the adhesion properties of the resin. verkürzen | |
| KEPERPOL®-743 | Kito Chem | KEPERPOL®-743 is a silicone defoamer which contains foam destroying polymers for solvent-based coatings. Made of polysiloxanes and foam destroying polymers, it comes as a colorless to light yellow transparent liquid.Particularly suitable for breaking the microbubbles in roller painting of epoxy systems...weiterlesen KEPERPOL®-743 is a silicone defoamer which contains foam destroying polymers for solvent-based coatings. Made of polysiloxanes and foam destroying polymers, it comes as a colorless to light yellow transparent liquid.Particularly suitable for breaking the microbubbles in roller painting of epoxy systems. It can be used in the production of inks and coatings using a hydrocarbon based solvent. verkürzen | |
| CLAYTONE 34 | BYK 毕克 | CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotrop...weiterlesen CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. CLAYTONE 34 has proven to be a reliable and reproducible rheological additive for use in oil based paints, stains, alkyd enamels and primers, and epoxy systems. verkürzen | |
| ADDITOL® VXW 6208/60 | Allnex | ADDITOL® VXW 6208/60 is a polymeric non-ionic dispersing and wetting additive for solvent-borne, solvent-free and water-dilutable paint systems. It enhances the gloss and stabilizes the achieved degree of gloss. It decreases viscosity, especially in high‐...weiterlesen ADDITOL® VXW 6208/60 is a polymeric non-ionic dispersing and wetting additive for solvent-borne, solvent-free and water-dilutable paint systems. It enhances the gloss and stabilizes the achieved degree of gloss. It decreases viscosity, especially in high‐filled paint systems. This product is used for the production of binder‐free pigment pastes and for tinting base colors. ADDITOL® VXW 6208/60 is mainly applied as wetting agent in solvent‐free and solvent‐borne two pack‐epoxy‐systems. verkürzen | Request Sample |
| AFCONA - 2040 | AFCONA Additives Sdn Bhd | AFCONA – 2040 is a silicone-containing defoamer with fluorocarbon in a diisobutyl ketone solvent. This clear liquid is compatible with most resin systems and prevents the formation of foam and blisters during manufacture and application with minimal side ...weiterlesen AFCONA – 2040 is a silicone-containing defoamer with fluorocarbon in a diisobutyl ketone solvent. This clear liquid is compatible with most resin systems and prevents the formation of foam and blisters during manufacture and application with minimal side effects. AFCONA – 2040 finds application in low to high polar paint systems, physical drying systems based on acrylic, vinyl, or chlorinated polymers, in polyurethane wood, plastic, and car refinishes, in airless spraying coats, in NC lacquers and acid curing wood and general industrial coatings, in stoving paints, in solvent-based epoxy systems, and in printing inks. verkürzen | |
| KEPERPOL®-766 | Kito Chem | KEPERPOL®-766 is a solvent-based defoaming agent made of a polysiloxane solution containing foam breaking particles. It is a slightly cloudy liquid with good foam inhibition and breaking performance in high solid and non solvent systems. It can also be us...weiterlesen KEPERPOL®-766 is a solvent-based defoaming agent made of a polysiloxane solution containing foam breaking particles. It is a slightly cloudy liquid with good foam inhibition and breaking performance in high solid and non solvent systems. It can also be used in some of the more difficult defomaing processes, such as in a stiff epoxy systems. This additive is well suited for use in the production of solvent-based and UV paints, coatings, epoxies and silk printing inks and anywhere high solid content is a concern. verkürzen | |
| DISPERBYK®-2152 | BYK 毕克 | DISPERBYK®-2152 is an emission-free, hyperbranched wetting and dispersing additive for solvent-free epoxy systems and other reactive systems. Achieving excellent deflocculation and stabilization requires an additive with highly efficient pigment-affinic g...weiterlesen DISPERBYK®-2152 is an emission-free, hyperbranched wetting and dispersing additive for solvent-free epoxy systems and other reactive systems. Achieving excellent deflocculation and stabilization requires an additive with highly efficient pigment-affinic groups. In general, those pigment-affinic groups are aminic in nature and can react with the epoxy resins. Due to the special hyperbranched structure of DISPERBYK®-2152 the aminic pigment-affinic groups are encapsulated by polyester side chains; this prevents reaction with the epoxy resin, and, as a result, long-term storage stability is achieved. The additive contains no solvents or volatile components and fulfills the strict requirements of the German AgBB as well as French VOC standards verkürzen | |
| BYK®-A 501 FOR UP RESINS | BYK 毕克 | It is a silicone-free air release additive for unsaturated polyester, epoxy and PUR resins. Recommended applications include epoxy resins and PUR-systems. | |
| IMICURE® EMI-24 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties a...weiterlesen IMICURE® EMI-24 Curing Agent s a liquid imidazole which functions as both a curing agent and a cure accelerator for high-performance epoxy resin systems. This unusually versatile imidazole is readily processed, and provides excellent physical properties across a wide range of curing temperatures. verkürzen | Request Sample |
| NW-100 | Naewoi Korea Resins | NW-100 is an additive to improve levelling in organic solvent systems. Its main component is a high boiling hydrocarbon and ester compound. It is used to improve gloss, and is workable with print inks. NW-100 can be used in acrylic, alkyd melamine high te...weiterlesen NW-100 is an additive to improve levelling in organic solvent systems. Its main component is a high boiling hydrocarbon and ester compound. It is used to improve gloss, and is workable with print inks. NW-100 can be used in acrylic, alkyd melamine high temperature baking systems, vinyl, acrylic and NC lacquer coatings, air drying chlorinated rubber systems, and epoxy air drying systems. verkürzen | |
| CLAYTONE-MPZ | BYK 毕克 | CLAYTONE-MPZ is a highly efficient rheology additive based on an organophilic phyllosilicate especially for medium-polarity to high-polarity systems to generate thixotropic flow behavior. Due to its special organic modification, CLAYTONE-MPZ is ideally su...weiterlesen CLAYTONE-MPZ is a highly efficient rheology additive based on an organophilic phyllosilicate especially for medium-polarity to high-polarity systems to generate thixotropic flow behavior. Due to its special organic modification, CLAYTONE-MPZ is ideally suited to influencing the flow behavior of polar to medium-polarity coating systems. CLAYTONE-MPZ performs especially well in systems containing aromatic solvents, alcohols, glycols, ketones and esters. CLAYTONE-MPZ is the best solution particularly in epoxy systems or zinc (shop) primers, where high sag resistance or anti-settling performance is required. In comparison to other clays (e.g. Hectorite-based clays) CLAYTONE-MPZ outperforms these products in performance and ease of dispersion. verkürzen | |
| ADDAPT® Foamstop™ SL 100 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ SL 100 is a silicone compound containing minerals. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product disperses easily and is used in paint, printing ink, cutting oils, and epoxy resin systems...weiterlesen ADDAPT® Foamstop™ SL 100 is a silicone compound containing minerals. It is used as a foam control agent to prevent the formation of macro-foam and reduce the formation of micro-foam. This product disperses easily and is used in paint, printing ink, cutting oils, and epoxy resin systems. verkürzen | |
| EPODIL® 759 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...weiterlesen EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. verkürzen | Request Sample |
| PHENODUR® PR 566/65BX | Allnex | PHENODUR® PR 566 is a Bisphenol A - free, heat-curing, non-plasticized phenolic resin. It is used in heat curable phenolic/polyester resin combinations (BADGE & BPA-NI lacquers) as well as phenolic/epoxy resin systems for the interior and exterior layer o...weiterlesen PHENODUR® PR 566 is a Bisphenol A - free, heat-curing, non-plasticized phenolic resin. It is used in heat curable phenolic/polyester resin combinations (BADGE & BPA-NI lacquers) as well as phenolic/epoxy resin systems for the interior and exterior layer of metal containers with high adhesion, excellent flexibility and good chemical resistance. verkürzen | Request Sample |
| BECKOPOX™ EH 694 | Allnex | BECKOPOX™ EH 694 is an anhydride hardener for use with solid epoxy resins, OH-functional polyesters or as an additional crosslinker for epoxy/polyester hybrid systems for the manufacture of powder coatings. Formulations based on BECKOPOX™ EH 694 exhibit c...weiterlesen BECKOPOX™ EH 694 is an anhydride hardener for use with solid epoxy resins, OH-functional polyesters or as an additional crosslinker for epoxy/polyester hybrid systems for the manufacture of powder coatings. Formulations based on BECKOPOX™ EH 694 exhibit chemical and over-bake resistance. verkürzen | Request Sample |
| Epoxy Acrylate SE 1605 | Soltech Ltd | Epoxy Acrylate SE 1605 is a partially acrylated ester of a bisphenol A type epoxy resin that contains both acrylate and epoxy properties that is designed to provide solvent resistance, high gloss, flexibility, and a good curing response. This product is c...weiterlesen Epoxy Acrylate SE 1605 is a partially acrylated ester of a bisphenol A type epoxy resin that contains both acrylate and epoxy properties that is designed to provide solvent resistance, high gloss, flexibility, and a good curing response. This product is commonly used in applications such as metal substrate inks, metal substrate coatings, and 2 component curing systems, Epoxy Acrylate SE 1605 is 100% polymer solid by weight with a viscosity of 800-1,200 at 60℃. verkürzen | |
| ADDITOL® XW 6567 | Allnex | Additol® XW 6567 is a Food Contact Compliant Defoamer for waterborne epoxy/phenolic systems used in B&B, DWI, General line containers, Caps, Closures and Aerosol industry. It is recommended for use in spray applied repair coatings applied to seal defects ...weiterlesen Additol® XW 6567 is a Food Contact Compliant Defoamer for waterborne epoxy/phenolic systems used in B&B, DWI, General line containers, Caps, Closures and Aerosol industry. It is recommended for use in spray applied repair coatings applied to seal defects formed during the mechanical crimping process. It is also recommended in all other coating types requiring food compliance with EU and/or US regulations. verkürzen | Request Sample |
| CYMEL® U-216-10LF | Allnex | CYMEL® U-216-10LF Resin is an n-butylated urea resin which has excellent compatibility with hydrophobic resins, including epoxies. It is the exempt solvent version of CYMEL® 216-8 resin with the additional benefit of lower free formaldehyde. It was designed for metal deco coatings, can coatings and coil coating primers. This product may also be added as a leveling agent in cold-cure amine catalyzed epoxy resin systems...weiterlesen CYMEL® U-216-10LF Resin is an n-butylated urea resin which has excellent compatibility with hydrophobic resins, including epoxies. It is the exempt solvent version of CYMEL® 216-8 resin with the additional benefit of lower free formaldehyde. It was designed for metal deco coatings, can coatings and coil coating primers. This product may also be added as a leveling agent in cold-cure amine catalyzed epoxy resin systems. verkürzen | Request Sample |
| Disponer 904S | Elementis 海名斯特殊化学 | Disponer 904S is a solvent additive for polar and non-polar systems. Activity for the most part independent of the binder. For systems based on alkyd, epoxy, epoxies, acrylic resins, PUR, polyesters and vinyl compounds. | |
| HX-2085 | Zhuhai Huaxia Paint Co., Ltd. | HX-2085, in the form of an emulsion, is a defoaming polysiloxane solution. This product can be used in solvent-based coatings, solvent-free coatings, UV-curable coatings, and solvent-based inks. It can eliminate and depress blisters created during the production, packaging, and application process. This product is suitable for high-viscosity, high solids, and solvent-free systems like epoxy...weiterlesen HX-2085, in the form of an emulsion, is a defoaming polysiloxane solution. This product can be used in solvent-based coatings, solvent-free coatings, UV-curable coatings, and solvent-based inks. It can eliminate and depress blisters created during the production, packaging, and application process. This product is suitable for high-viscosity, high solids, and solvent-free systems like epoxy flooring applications, antiseptic coatings, and electronic encapsulations. verkürzen | |
| HX-2090 | Zhuhai Huaxia Paint Co., Ltd. | HX-2090, in the form of an emulsion, is a defoaming polysiloxane solution. This product can be used in solvent-based coatings, solvent-free coatings, UV-curable coatings, and solvent-based inks. It can eliminate and depress blisters created during the production, packaging, and application process. This product is suitable for high-viscosity, high solids, and solvent-free systems like epoxy...weiterlesen HX-2090, in the form of an emulsion, is a defoaming polysiloxane solution. This product can be used in solvent-based coatings, solvent-free coatings, UV-curable coatings, and solvent-based inks. It can eliminate and depress blisters created during the production, packaging, and application process. This product is suitable for high-viscosity, high solids, and solvent-free systems like epoxy flooring applications, antiseptic coatings, and electronic encapsulations. verkürzen | |
| EPOXY METHACRYLATE 97-053 | Rahn AG | EPOXY METHACRYLATE 97-053 is a Bisphenol A epoxy dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. The product properties can be described as follows: low shrinkage, high stress resistance and high e-modulus, high abrasion ...weiterlesen EPOXY METHACRYLATE 97-053 is a Bisphenol A epoxy dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. The product properties can be described as follows: low shrinkage, high stress resistance and high e-modulus, high abrasion resistance, high hardness and scratch resistance, good adhesion and monomer-free. It improves resistance to solvents and chemicals. EPOXY METHACRYLATE 97-053 is designed for dental composites, UV adhesives and UV curtain systems. verkürzen | Request Sample |
| Epoxy Modified Polysiloxane R-8202 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | R-8202 is an epoxy modified polysiloxane. It maintains good epoxy reaction activity, coupling effects, and provides better storage activity. This product is widely used in modified plastics and coating fields, and is recommended for aqueous systems and co...weiterlesen R-8202 is an epoxy modified polysiloxane. It maintains good epoxy reaction activity, coupling effects, and provides better storage activity. This product is widely used in modified plastics and coating fields, and is recommended for aqueous systems and compatible polymer formulas. verkürzen | |
| ALNOVOL® PN 650/60B | Allnex | ALNOVOL PN 650/60B is designed to act as a modifier of heat curable phenolic/polyester resin combinations (BADGE-free & BPA-NI systems) and phenolic/epoxy resin formulas. An addition of 20 - 40% of ALNOVOL PN 650/60B as solid on total dry film solid impro...weiterlesen ALNOVOL PN 650/60B is designed to act as a modifier of heat curable phenolic/polyester resin combinations (BADGE-free & BPA-NI systems) and phenolic/epoxy resin formulas. An addition of 20 - 40% of ALNOVOL PN 650/60B as solid on total dry film solid improves the flexibility of the coating by maintaining the chemical resistance. Positive effects in regards to leveling and substrate adhesion could be observed as well. Application areas are the interior and exterior layer of metal packaging goods like collapsibletubes,cans and drums for water,oils and food. verkürzen | Request Sample |
| DUROXYN® EF 900/60X | Allnex | Duroxyn® EF 900/60X is an air-drying and stoving epoxy resin ester that is used in anticorrosive paint systems and primers, and zinc dust paints. | Request Sample |
| BECKOPOX™ EP 2384w/57WA | Allnex | BECKOPOX™ EP 2384w/57WA is a type 1 solid epoxy resin as aqueous dispersion. It results in rapid drying coating systems for mineral and metal substrates. | Request Sample |
| SETAL® 690 | Allnex | SETAL® 690 is a water reduceable acrylated epoxy ester which has good compatability with acrylic emulsions and used to formulate metal primers and enamels, both air dry and baking systems. | Request Sample |
| SLK-DF50FT | Jiande Silicone Import & Export Co., Ltd. | SLK-DF50FT is a clear liquid, 100% active fluorosilicone polymer used in solvent based ink and coating systems. It can provide foam control, leveling and wetting in acrylic, alkyd, amide, epoxy, nitrocellulose, polyesters, polyurethane and vinyl based sys...weiterlesen SLK-DF50FT is a clear liquid, 100% active fluorosilicone polymer used in solvent based ink and coating systems. It can provide foam control, leveling and wetting in acrylic, alkyd, amide, epoxy, nitrocellulose, polyesters, polyurethane and vinyl based systems. verkürzen | |
| BECKOPOX™ VEP 2382w/55WA | Allnex | BECKOPOX® VEP 2382W/55WA is solid epoxy resin dispersion in water. When cured with suitable curing agents such as Beckopox EH 623w or EH 659w fast drying coating systems for mineral or metallic substrates can be formulated. | Request Sample |
| BECKOPOX™ VEM 2448/50EEP | Allnex | Beckopox® VEM 2448/50EEP is a modified, carboxylated epoxy resin, self cross-linking. It's a sole binder for white and clear interior and exterior can-coating systems, stamping enamels, capsule lacquers, foil lacquers and coil-coating primers with outstan...weiterlesen Beckopox® VEM 2448/50EEP is a modified, carboxylated epoxy resin, self cross-linking. It's a sole binder for white and clear interior and exterior can-coating systems, stamping enamels, capsule lacquers, foil lacquers and coil-coating primers with outstanding resistances. verkürzen | Request Sample |
| BECKOPOX™ EP 128 | Allnex | Beckopox® EP 128 is a solvent-free liquid epoxy resin. It is used in: the construction field for chemical and abrasion resistant flooring compounds, for sealing and repairing stone and concrete structures, anticorrosion/solvent-free coating systems, for c...weiterlesen Beckopox® EP 128 is a solvent-free liquid epoxy resin. It is used in: the construction field for chemical and abrasion resistant flooring compounds, for sealing and repairing stone and concrete structures, anticorrosion/solvent-free coating systems, for cold and heat-curing trowelling and adhesive systems, in the electrical industry for castings, impregnations and composites, and for tool- and mould constructions, patterns, models and fixtures. verkürzen | Request Sample |
| BLUESIL PI 2074 | Elkem Silicones | BLUESIL PI 2074 is a cationic photoinitiator for use with epoxy resins, vinyl ethers or any other type of oligomer which polymerises cationically. It is also suited to the formulation of hybrid radical / cationic systems. | |
| BECKOPOX™ EH 2189w/50WA | Allnex | Beckopox® EH 2189W/50WA is a highly reactive amine hardener for waterbased 2K epoxy coatings on metallic substrates. It is used together with solid epoxy resin dispersions like e.g. Beckopox® EP 384W. Coating systems for metallic substrates can be formula...weiterlesen Beckopox® EH 2189W/50WA is a highly reactive amine hardener for waterbased 2K epoxy coatings on metallic substrates. It is used together with solid epoxy resin dispersions like e.g. Beckopox® EP 384W. Coating systems for metallic substrates can be formulated with excellent humidity and salt spray resistance. The use of 70 - 80 % of the stoichometric curing agent quantity has given best results. verkürzen | Request Sample |
| Pangel OM8 | Tolsa, S.A. | Pangel OM8 is a rheological additive for low to medium polarity systems made from purified bentonite clay. It is recommended for systems based on resins such as polyurethanes, acrylics, polyester, epoxy esters, and alkyds. It can be used in anti-corrosi...weiterlesen Pangel OM8 is a rheological additive for low to medium polarity systems made from purified bentonite clay. It is recommended for systems based on resins such as polyurethanes, acrylics, polyester, epoxy esters, and alkyds. It can be used in anti-corrosive paints, polyester coatings, primers, industrial finishes, road marking paints, bituminous undercoats, varnishes, and inks. verkürzen | |
| Pangel OMD2 | Tolsa, S.A. | Pangel OMD2 is a rheological additive for medium to high polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, an...weiterlesen Pangel OMD2 is a rheological additive for medium to high polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, and pigment settling prevention. It can be used in anti-corrosive paints, adhesives, industrial finishes, maintenance coatings, epoxy based coatings, and paint removers. verkürzen | |
| Silane Coupling Agent KH-602 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-602 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing good adhesion, superior elongation, and flexibility at the polymer-substrate interface. It is used to promote adhesion between glass/mineral and metal surfaces-reinforcements, fillers/substrates-and resins that react with amino groups in systems such as PVC plastisol, polyurethane, or epoxy-based adhesives and sealant, or in phenolic and epoxy molding compounds. Its reduced alkoxy functionality might also be useful in waterborne systems...weiterlesen KH-602 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing good adhesion, superior elongation, and flexibility at the polymer-substrate interface. It is used to promote adhesion between glass/mineral and metal surfaces-reinforcements, fillers/substrates-and resins that react with amino groups in systems such as PVC plastisol, polyurethane, or epoxy-based adhesives and sealant, or in phenolic and epoxy molding compounds. Its reduced alkoxy functionality might also be useful in waterborne systems such as latex coatings, adhesives and sealants, providing lower reactivity and therefore higher stability in the aqueous environment. verkürzen | |
| CRYLCOAT® 1702-0 | Allnex | CRYLCOAT® 1702-0 is a low reactive carboxyl functional polyester resin for use with epoxy resin in a 70/30 ratio to manufacture hybrid powder coatings. Systems based on CRYLCOAT® 1702-0 exhibit excellent mechanical properties, very good flow and overbake ...weiterlesen CRYLCOAT® 1702-0 is a low reactive carboxyl functional polyester resin for use with epoxy resin in a 70/30 ratio to manufacture hybrid powder coatings. Systems based on CRYLCOAT® 1702-0 exhibit excellent mechanical properties, very good flow and overbake resistance. verkürzen | Request Sample |
| BECKOPOX™ EP 387w/52WA | Allnex | BECKOPOX™ EP 387w/52WA is a flexible solid epoxy resin. It is suited for corrosion protection primers with very good adhesion to most metallic substrates. It is also suitable for use in single coat and decorative systems for metallic substrates. For optim...weiterlesen BECKOPOX™ EP 387w/52WA is a flexible solid epoxy resin. It is suited for corrosion protection primers with very good adhesion to most metallic substrates. It is also suitable for use in single coat and decorative systems for metallic substrates. For optimium corrosion protection it is recommended using 75 % of the stoichiometric curing agent quantity. verkürzen | Request Sample |
| BP®-923 | Zhejiang Huate New Material Co., Ltd. | BP®-923 is a solvent based organoclay with rheological properties that is applied in low, middle and high polar solvent systems. This product provides anti-flowing and thixotropic effects in addition to high dispersion. It is applicable to epoxy paints, a...weiterlesen BP®-923 is a solvent based organoclay with rheological properties that is applied in low, middle and high polar solvent systems. This product provides anti-flowing and thixotropic effects in addition to high dispersion. It is applicable to epoxy paints, anti-corrosion paints, and inks. verkürzen | |
| AFCONA - 5290 | AFCONA Additives Sdn Bhd | AFCONA – 5290 is a polymer with pigment affinity groups. This product consists of high molecular weight dispersants and is used for high solid systems and formulations and provides pigment stability, performance, and color strength. AFONCA – 5290 finds ap...weiterlesen AFCONA – 5290 is a polymer with pigment affinity groups. This product consists of high molecular weight dispersants and is used for high solid systems and formulations and provides pigment stability, performance, and color strength. AFONCA – 5290 finds application in solvent-based systems from low to high polarity including air dry alkyds, in high solid coatings such as polyurethane, epoxy, and ultraviolet coatings, and as a dispersant for ink formulations. verkürzen | |
| Silane Coupling Agent KH-7180 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-7180 is a versatile epoxy organo-reactive silane with two hydrolyzable ethoxy groups. It provides shelf stable non-yellowing adhesion promoter performance while enhancing physical properties in latexes and waterborne adhesive and sealant systems. This ...weiterlesen KH-7180 is a versatile epoxy organo-reactive silane with two hydrolyzable ethoxy groups. It provides shelf stable non-yellowing adhesion promoter performance while enhancing physical properties in latexes and waterborne adhesive and sealant systems. This product is recommended for automotive laminate adhesives, furniture laminate adhesives, and flocking adhesives. verkürzen | |
| VESTALITE® S 101 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient process...weiterlesen VESTALITE® S 101 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 101 have a low initial viscosity during compounding, allowing excellent fiber wetting, highfiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing inabout 4 - 5 min at 150 °. verkürzen | Request Sample |
| VESTALITE® S 102 | Evonik Operations GmbH, BL Crosslinkers | VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing....weiterlesen VESTALITE® S 102 is a curing agent for epoxy resin matrix designed for SMC applications. Systems using VESTALITE® S 102 have a low initial viscosity during compounding, allowing excellent fiber wetting, high fiber volume fraction and efficient processing. The high reactivity of the hardener allows fast curing in about3 min at 150 °C. verkürzen | Request Sample |
| SILCOLEASE UV CATA 243 | Elkem Silicones | SILCOLEASE UV CATA 243 is a low odour photoinitiator used for the polymerization of SILCOLEASE UV 200 Series of base polymers. It may also be used with epoxy resins, vinyl ethers or any other type of oligomer which reacts via a cationic polymerisation mec...weiterlesen SILCOLEASE UV CATA 243 is a low odour photoinitiator used for the polymerization of SILCOLEASE UV 200 Series of base polymers. It may also be used with epoxy resins, vinyl ethers or any other type of oligomer which reacts via a cationic polymerisation mechanism. It is also suited to the formulation of hybrid radical / cationic systems. verkürzen | |
| BP®-183B | Zhejiang Huate New Material Co., Ltd. | BP®-183B is a solvent based organoclay additive with rheological properties that appears as a light yellow, free flowing powder. This product provides desirable compatibility and thickening abilities in low, middle and high polar solvent systems. It is al...weiterlesen BP®-183B is a solvent based organoclay additive with rheological properties that appears as a light yellow, free flowing powder. This product provides desirable compatibility and thickening abilities in low, middle and high polar solvent systems. It is also commonly used in mixed paints, bitumen paints, chlorinated rubber paints, anticorrosion paints, epoxy paints, sealants, and printing inks. verkürzen | |
| KEPERPOL®-768 | Kito Chem | KEPERPOL®-768 is a viscosity system silicone defoaming agent, made of a polysiloxane solution with hydrophobic particles. It is a milk white translucent liquid can impart good foam inhibition in some of the more difficult defoaming formulations. This additive is well suited for use in the production of epoxy floor paints and silk printing inks used in both high solid and non-solvent systems...weiterlesen KEPERPOL®-768 is a viscosity system silicone defoaming agent, made of a polysiloxane solution with hydrophobic particles. It is a milk white translucent liquid can impart good foam inhibition in some of the more difficult defoaming formulations. This additive is well suited for use in the production of epoxy floor paints and silk printing inks used in both high solid and non-solvent systems. verkürzen | |
| Silane Coupling Agent KH-560 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-560 is a epoxy-functional silane. It is a clear, light straw liquid. It may be used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-b...weiterlesen KH-560 is a epoxy-functional silane. It is a clear, light straw liquid. It may be used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-binders. KH-560 is particularly employed as an adhesion-promoting additive in waterborne systems, e.g. improving the adhesion of acrylic latex sealants. verkürzen | |
| AFCONA - 4201 | AFCONA Additives Sdn Bhd | AFCONA – 4201 is a modified polyurethane polymer that functions as a high molecular weight polymeric dispersant for the deflocculation of pigments. This product provides improved steric hindrance, pigment stability, color, gloss, and is almost 100% solvent free. AFCONA – 4201 is suitable for use in polyurethane, epoxy, polyester/melanine, alkyd/melanine, acid curing, NC, and ultraviolet systems...weiterlesen AFCONA – 4201 is a modified polyurethane polymer that functions as a high molecular weight polymeric dispersant for the deflocculation of pigments. This product provides improved steric hindrance, pigment stability, color, gloss, and is almost 100% solvent free. AFCONA – 4201 is suitable for use in polyurethane, epoxy, polyester/melanine, alkyd/melanine, acid curing, NC, and ultraviolet systems, finding application in high solid coatings, and ink formulations. verkürzen | |
| RC-750 Anti-Settling Agent | Changxing Xiehe Polymer Co., Ltd. | RC-750 anti-settling agent is used in solvent coatings as an auxiliary to anti settling and sagging. It is particularly useful in high solid content coating system. RC-750 can be used in most non-aqueous coatings e.g. air-dried alkyd, alkyd-melamine, acrylic, nitrocellulose, chlorinated rubber and epoxy coatings. It is suitable also for wash primer and high solid paints. According to experience, RC-750 cannot be applied to systems...weiterlesen RC-750 anti-settling agent is used in solvent coatings as an auxiliary to anti settling and sagging. It is particularly useful in high solid content coating system. RC-750 can be used in most non-aqueous coatings e.g. air-dried alkyd, alkyd-melamine, acrylic, nitrocellulose, chlorinated rubber and epoxy coatings. It is suitable also for wash primer and high solid paints. According to experience, RC-750 cannot be applied to systems containing zinc-powder. verkürzen | |
| VIACRYL® VSC 6276w/44WA | Allnex | VIACRYL® VSC 6276W/44WA is an aqueous hydroxy functional copolymer emulsion that can be crosslinked with reactive melamine resin such as CYMEL® 325 or CYMEL® 327 to give less-yellowing industrial coating systems with good gloss. | Request Sample |
| GENOMER* 4267 | Rahn AG | GENOMER* 4267 is an aliphatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 4267 is recommended for applications where both high flexibility combined with the toughness expected of urethane acrylates are required. The product is used in combination with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. This product is recommended for use in the following applications: non-yellowing industrial coatings; coatings for automotive applications and mobile phones; printing inks and varnishes; adhesives; and flexibilizer for corrosion-resistant systems...weiterlesen GENOMER* 4267 is an aliphatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 4267 is recommended for applications where both high flexibility combined with the toughness expected of urethane acrylates are required. The product is used in combination with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. This product is recommended for use in the following applications: non-yellowing industrial coatings; coatings for automotive applications and mobile phones; printing inks and varnishes; adhesives; and flexibilizer for corrosion-resistant systems. verkürzen | Request Sample |
| VIACRYL® VSC 6279w/45WA | Allnex | VIACRYL® VSC 6279W/45WA is a copolymer emulsion based on styrene and acrylic acid esters free of organic cosolvents and alkyl phenol ethoxylates. It can be used as sole binder to formulate rapid drying corrosion protecting primers and primer surfacers. It can even be used to formulate non yellowing decorative finishing systems...weiterlesen VIACRYL® VSC 6279W/45WA is a copolymer emulsion based on styrene and acrylic acid esters free of organic cosolvents and alkyl phenol ethoxylates. It can be used as sole binder to formulate rapid drying corrosion protecting primers and primer surfacers. It can even be used to formulate non yellowing decorative finishing systems with excellent outdoor durability and UV resistance. verkürzen | Request Sample |
| Dynoadd® F-705 | Dynoadd by Dynea 太尔化工 | Dynoadd® F-705 is a highly effective non-silicone, VOC free polymeric foam control concentrate. It is effective in radiation curing formulations at preventing generation of foam, and it is particularly effective in air release, thus reducing popping and pinholes. It can be used as a foam control and de-aerating additive in solvent-borne food contact coatings at levels up to 0.1%. Dynoadd® F-705 is recommended for use as defoamer and de-airator in thick film coatings (2K epoxy, UP, PUR). Dynoadd® F-705 has applications in packaging coatings, direct food contact, UV coatings, general industry, and floor coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems...weiterlesen Dynoadd® F-705 is a highly effective non-silicone, VOC free polymeric foam control concentrate. It is effective in radiation curing formulations at preventing generation of foam, and it is particularly effective in air release, thus reducing popping and pinholes. It can be used as a foam control and de-aerating additive in solvent-borne food contact coatings at levels up to 0.1%. Dynoadd® F-705 is recommended for use as defoamer and de-airator in thick film coatings (2K epoxy, UP, PUR). Dynoadd® F-705 has applications in packaging coatings, direct food contact, UV coatings, general industry, and floor coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. verkürzen | |
| Bisomer® PPA 6 | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has a...weiterlesen Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has an acid numer of < 0.3mg KOH/g, a saponification value of 126-138mg KOH/g, a volatile components pf 0.5% max., and a molecular weight of 420g/mol. Bisomer® PPA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. This product is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and polyurethane dispersions (PUDs). It is also used in more traditional acrylic polyols for surface coatings. verkürzen | |
| EPODIL® 742 | Evonik Operations GmbH, BL Crosslinkers | An epoxy resin system modifier. | Request Sample |
| CRYLCOAT® 2413-2 | Allnex | CRYLCOAT® 2413-2 is a carboxylated polyester resin for use with TGIC in a 90/10 ratio to manufacture powder coatings preferably smooth G 20 matte dry blend systems in combination with CRYLCOAT® 2470-2. Formulations based on CRYLCOAT® 2413-2 exhibit good f...weiterlesen CRYLCOAT® 2413-2 is a carboxylated polyester resin for use with TGIC in a 90/10 ratio to manufacture powder coatings preferably smooth G 20 matte dry blend systems in combination with CRYLCOAT® 2470-2. Formulations based on CRYLCOAT® 2413-2 exhibit good flow, high solvent resistance, excellent outdoor weathering resistance and outstanding storage stability. verkürzen | Request Sample |
| Bisomer® PEA 6 | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® PEA 6 (Polyethyleneglycol Monoacrylate) monomer for special polymers. It is water soluble and offers a novel route to the production of traditional and water based UV curable urethane acrylate oligomers. As an alternative to HEA and HPA, it is no...weiterlesen Bisomer® PEA 6 (Polyethyleneglycol Monoacrylate) monomer for special polymers. It is water soluble and offers a novel route to the production of traditional and water based UV curable urethane acrylate oligomers. As an alternative to HEA and HPA, it is non-toxic, easy to handle and listed as a polymer in the EINECS classification. This product has an acid number of < 0.3mg KOH/g, a saponification value pf 155-175mg KOH/g, and a molecular weight (av) of 336g/mol. It is an excellent, low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). Bisomer® PEA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. Bisomer® PEA6 is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and particularly in non-ionic polyurethane dispersions (PUDs) for ease of dispersion. verkürzen | |
| RESYDROL® AX 6267w/43WA | Allnex | RESYDROL® AX 6267w/43WA is an epoxy-acrylic hybrid system as aqueous emulsion. It is suited to formulate corrosion resistant primers and in view of its rapid drying properties is generally applied by spraying. | Request Sample |
| RC-800 Micronized Polyamide Wax | Changxing Xiehe Polymer Co., Ltd. | RC-800 Micronized Polyamide Wax is a special amide wax. The product could be used as rheological additives in solvent based system and non-solvent system. It could provide excellent thixotropic, thickening and anti-sagging functions for coatings, inks, adhesives, sealants and lubricating etc. RC-800 is recommended for solvent based heavy duty paints, specifically Epoxy...weiterlesen RC-800 Micronized Polyamide Wax is a special amide wax. The product could be used as rheological additives in solvent based system and non-solvent system. It could provide excellent thixotropic, thickening and anti-sagging functions for coatings, inks, adhesives, sealants and lubricating etc. RC-800 is recommended for solvent based heavy duty paints, specifically Epoxy primers, Chlorinated rubber primers and Alkyds primers. verkürzen | |
| AFCONA - 2720 | AFCONA Additives Sdn Bhd | AFCONA – 2720 is a silicone-free polymer in an alkylbenzene and SBP spirit solvent. This slightly yellow liquid functions as an anti-foam and de-aeration additive for use in unsaturated polyesters, coil and can coatings, two-pack epoxies, polyester/melamine stoving systems...weiterlesen AFCONA – 2720 is a silicone-free polymer in an alkylbenzene and SBP spirit solvent. This slightly yellow liquid functions as an anti-foam and de-aeration additive for use in unsaturated polyesters, coil and can coatings, two-pack epoxies, polyester/melamine stoving systems, PVC compounds, and printing inks. verkürzen | |
| DISPERBYK®-2155 | BYK 毕克 | DISPERBYK®-2155 is a wetting and dispersing additive for solvent-borne and solvent-free systems and pigment concentrates. This product is, due to its solids content, ideal for high solids systems. DISPERBYK® 2155 displays excellent compatibility with all ...weiterlesen DISPERBYK®-2155 is a wetting and dispersing additive for solvent-borne and solvent-free systems and pigment concentrates. This product is, due to its solids content, ideal for high solids systems. DISPERBYK® 2155 displays excellent compatibility with all common paint binders, such as alkyds, nitro cellulose, chlorinated rubber, epoxies, OH-polyols and polyurethane. It also leads to a very strong mill base viscosity reduction. Accordingly, a higher pigment content in pigment concentrates can be realized. verkürzen | |
| RC-760 Anti-Settling Agent | Changxing Xiehe Polymer Co., Ltd. | RC-760 anti-settling agent is used in solvent coatings as an auxiliary to anti settling and sagging. It is particularly useful in high solid content coating system. RC-760 can be used in most non-aqueous coatings e.g. air-dried alkyd, alkyd-melamine, acrylic, nitrocellulose, chlorinated rubber and epoxy...weiterlesen RC-760 anti-settling agent is used in solvent coatings as an auxiliary to anti settling and sagging. It is particularly useful in high solid content coating system. RC-760 can be used in most non-aqueous coatings e.g. air-dried alkyd, alkyd-melamine, acrylic, nitrocellulose, chlorinated rubber and epoxy coatings. It is suitable also for wash primer and high solid paints. verkürzen | |
| KEPERPOL®-718 | Kito Chem | KEPERPOL®-718 is a non-silicon defoaming agent made of a polyolefin solution. it is a yellowish transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming deaeration in medium low polarity system such as unsaturated polyester, polyurethane, epoxy...weiterlesen KEPERPOL®-718 is a non-silicon defoaming agent made of a polyolefin solution. it is a yellowish transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming deaeration in medium low polarity system such as unsaturated polyester, polyurethane, epoxy and so on, but dose not effect on the transparency. This additive is well suited for use in the production of medium and low polarity solvent type coating and printing inks. verkürzen | |
| KEPERPOL®-717 | Kito Chem | KEPERPOL®-718 is a non-silicon defoaming agent made of a polyolefin solution. it is a yellowish transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming deaeration in medium low polarity system such as unsaturated polyester, polyurethane, epoxy...weiterlesen KEPERPOL®-718 is a non-silicon defoaming agent made of a polyolefin solution. it is a yellowish transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming deaeration in medium low polarity system such as unsaturated polyester, polyurethane, epoxy and so on, but dose not effect on the transparency. This additive is well suited for use in the production of medium and low polarity solvent type coating and printing inks. verkürzen | |
| KEPERPOL®-720 | Kito Chem | KEPERPOL®-720 is a non-silicon defoaming agent made of a Vinyl ether polymer solution. it is a colorless, transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming deaeration in medium low polarity system such as unsaturated polyester, polyurethane, epoxy...weiterlesen KEPERPOL®-720 is a non-silicon defoaming agent made of a Vinyl ether polymer solution. it is a colorless, transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming deaeration in medium low polarity system such as unsaturated polyester, polyurethane, epoxy and so on, but dose not effect on the transparency. This additive is well suited for use in the production of medium and low polarity solvent type coating and printing inks. verkürzen | |
| KEPERPOL®-Re-711 | Kito Chem | KEPERPOL®-Re-711 is a non-silicon defoaming agent made of a Vinyl ether polymer solution. it is a colorless, transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming deaeration in medium low polarity system such as unsaturated polyester, polyurethane, epoxy...weiterlesen KEPERPOL®-Re-711 is a non-silicon defoaming agent made of a Vinyl ether polymer solution. it is a colorless, transparent liquid with excellent compatibility in film, dose not effect on the transparency and a very low cratering tendency. It has good defoaming deaeration in medium low polarity system such as unsaturated polyester, polyurethane, epoxy and so on, but dose not effect on the transparency. This additive is well suited for use in the production of medium and low polarity solvent type coating and printing inks. verkürzen |
