| PHENODUR® VPW 1942/52WA | Allnex | PHENODUR® VPW 1942/52WA is a formulated phenolic/epoxide system, intended as sole-binder for the interior and exterior coating of metallic packaging materials and for corrosion resistant industrial stoving systems. | Request Sample |
| Araldite® GY 6010 | Jubail Chemical Industries Co. | Araldite® GY 6010 is a general purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its reactivity, compatibility, and low hydrolysable chlorine content. Araldite® GY 6010 is used in the formulation of c...weiterlesen Araldite® GY 6010 is a general purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its reactivity, compatibility, and low hydrolysable chlorine content. Araldite® GY 6010 is used in the formulation of chemical resistant coatings and matrix adhesives. verkürzen | |
| Epokukdo YDB-424A80 | Kukdo Chemical Co., Ltd. | Epokukdo YDB-424A80 is a brominated flame retardant epoxy resin mainly used for multi-layer board of PCB. This product is well suited for products that require minimum viscosity during the cycle, with viscosity gradient before gelation and the time requir...weiterlesen Epokukdo YDB-424A80 is a brominated flame retardant epoxy resin mainly used for multi-layer board of PCB. This product is well suited for products that require minimum viscosity during the cycle, with viscosity gradient before gelation and the time required to effect gelation. verkürzen | |
| EFKA® PL 5381 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PL 5381 is the standard type of an epoxy plasticizer. It has a good stabilizing effect and is largely extraction-resistant to cleaning materials and many industrial agents. Its migration resistance (also to polystyrene) is comparable with those of p...weiterlesen EFKA® PL 5381 is the standard type of an epoxy plasticizer. It has a good stabilizing effect and is largely extraction-resistant to cleaning materials and many industrial agents. Its migration resistance (also to polystyrene) is comparable with those of polymeric plasticizers. verkürzen | |
| Tohmide 213-A | Sanho Chemical Co., Ltd. | Tohmide 213-A is a reactive polyamide epoxy resin curing agent in a yellow-brown-colored viscous liquid form. This product has a total solids content of 48-52%. Tohmide 213-A is most commonly used in fast-curing paint formulation applications. | |
| HS9104 | Tianyi Chemical Engineering Material Co., Ltd. | HS9104, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic top coatings, wooden paints, and paper varnishes. This product has a rapid cure with high gloss. It has a low shrinkage rate with high flexibilit...weiterlesen HS9104, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic top coatings, wooden paints, and paper varnishes. This product has a rapid cure with high gloss. It has a low shrinkage rate with high flexibility. verkürzen | |
| Epokukdo YD-011EC75 | Kukdo Chemical Co., Ltd. | Epokukdo YD-011 is a solid type standard epoxy resin derived from Bisphenol-A and Epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, Epokukdo YD-011EC75 dissolved in ethyl cell...weiterlesen Epokukdo YD-011 is a solid type standard epoxy resin derived from Bisphenol-A and Epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, Epokukdo YD-011EC75 dissolved in ethyl cellosolve is generally used in many applications. verkürzen | |
| Epokukdo YD-011BC75 | Kukdo Chemical Co., Ltd. | Epokukdo YD-011 is a solid type standard epoxy resin derived from Bisphenol-A and Epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, Epokukdo YD-011BC75 dissolved in butyl cell...weiterlesen Epokukdo YD-011 is a solid type standard epoxy resin derived from Bisphenol-A and Epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, Epokukdo YD-011BC75 dissolved in butyl cellosolve is generally used in many applications. verkürzen | |
| Epokukdo YD-011BC70 | Kukdo Chemical Co., Ltd. | Epokukdo YD-011BC70 is a solid type standard epoxy resin derived from Bisphenol-A and Epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, Epokukdo YD-011BC70 dissolved in butyl ...weiterlesen Epokukdo YD-011BC70 is a solid type standard epoxy resin derived from Bisphenol-A and Epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, Epokukdo YD-011BC70 dissolved in butyl cellosolve is generally used in many applications. verkürzen | |
| Epokukdo YD-128MC90 | Kukdo Chemical Co., Ltd. | Epokukdo YD-128 is a liquid type standard epoxy resin derived from Bisphenol-A and Epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, Epokukdo YD-128MC90 dissolved in methyl ce...weiterlesen Epokukdo YD-128 is a liquid type standard epoxy resin derived from Bisphenol-A and Epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, Epokukdo YD-128MC90 dissolved in methyl cellosolve is generally used in many applications. verkürzen | |
| Epokukdo YD-128MX75 | Kukdo Chemical Co., Ltd. | Epokukdo YD-128 is a liquid type standard epoxy resin derived from Bisphenol-A and Epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, Epokukdo YD-128MX75 dissolved in xylene an...weiterlesen Epokukdo YD-128 is a liquid type standard epoxy resin derived from Bisphenol-A and Epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, Epokukdo YD-128MX75 dissolved in xylene and methanol is generally used in many applications. verkürzen | |
| Epokukdo YD-017KT55 | Kukdo Chemical Co., Ltd. | Epokukdo YD-017 is a solid type standard epoxy resin derived from Bisphenol-A and Epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, Epokukdo YD-017KT55 dissolved in MIBK and t...weiterlesen Epokukdo YD-017 is a solid type standard epoxy resin derived from Bisphenol-A and Epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, Epokukdo YD-017KT55 dissolved in MIBK and toluene is generally used in many applications.. verkürzen | |
| Epokukdo YD-017EC55 | Kukdo Chemical Co., Ltd. | Epokukdo YD-017 is a solid type standard epoxy resin derived from Bisphenol-A and Epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, Epokukdo D-017EC55 dissolved in ethyl cello...weiterlesen Epokukdo YD-017 is a solid type standard epoxy resin derived from Bisphenol-A and Epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, Epokukdo D-017EC55 dissolved in ethyl cellosolve is generally used in many applications. verkürzen | |
| Epokukdo YD-011MX75 | Kukdo Chemical Co., Ltd. | Epokukdo YD-011 is a solid type standard epoxy resin derived from Bisphenol-A and Epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, Epokukdo YD-011MX75 dissolved in MIBK and x...weiterlesen Epokukdo YD-011 is a solid type standard epoxy resin derived from Bisphenol-A and Epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, Epokukdo YD-011MX75 dissolved in MIBK and xylene is generally used in many applications. verkürzen | |
| Grilonit® H 82062 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 82062 is a modified cycloaliphatic polyamine low viscous universal hardener for solvent-free coatings. It has a short pot life, and after full cure a low sensitivity to water. This product is used as a curing agent in liquid epoxy resins. | |
| Kingmide 328-A | Sanho Chemical Co., Ltd. | Kingmide 328-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 0.97. Kingmide 328-A is most commonly used in adhesive formulation application...weiterlesen Kingmide 328-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 0.97. Kingmide 328-A is most commonly used in adhesive formulation applications. verkürzen | |
| Epokukdo YDPN-644 | Kukdo Chemical Co., Ltd. | Epokukdo YDPN-644 has advantageous characteristics of excellent heat and chemical resistance, because of its is multi-functional groups in one molecule providing higher cross-linked property than general difunctional epoxy resin. It also has high reactivi...weiterlesen Epokukdo YDPN-644 has advantageous characteristics of excellent heat and chemical resistance, because of its is multi-functional groups in one molecule providing higher cross-linked property than general difunctional epoxy resin. It also has high reactivity so that it is curable at ambient temperature. verkürzen | |
| Kingcure X-963 | Sanho Chemical Co., Ltd. | Kingcure X-963 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 100-200 mPa.s and a specific gravity of 1.10. Kingcure X-963 is most commonly used in coating formulation applications. | |
| Kingmide 305 | Sanho Chemical Co., Ltd. | Kingmide 305 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 50,000-70,000 mPa.s and a specific gravity of 0.97. Kingmide 305 is most commonly used in adhesive formulation applicat...weiterlesen Kingmide 305 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 50,000-70,000 mPa.s and a specific gravity of 0.97. Kingmide 305 is most commonly used in adhesive formulation applications. verkürzen | |
| Epokukdo YD-115CA | Kukdo Chemical Co., Ltd. | Epokukdo YD-115CA is a Bisphenol-A type liquid epoxy resin diluted with BGE. YD-115CA has good adhesive strength, chemical resistance after curing and it has high reactivity and low viscosity. Due to its excellent properties, YD-115CA is generally used in...weiterlesen Epokukdo YD-115CA is a Bisphenol-A type liquid epoxy resin diluted with BGE. YD-115CA has good adhesive strength, chemical resistance after curing and it has high reactivity and low viscosity. Due to its excellent properties, YD-115CA is generally used in many fields. verkürzen | |
| Epokukdo YD-115 | Kukdo Chemical Co., Ltd. | Epokukdo YD-115 is a Bisphenol-A type liquid epoxy resin diluted with BGE. YD-115 has good adhesive strength, chemical resistance after curing and it has high reactivity and low viscosity. Due to its excellent properties, YD-115 is generally used in many ...weiterlesen Epokukdo YD-115 is a Bisphenol-A type liquid epoxy resin diluted with BGE. YD-115 has good adhesive strength, chemical resistance after curing and it has high reactivity and low viscosity. Due to its excellent properties, YD-115 is generally used in many fields. verkürzen | |
| Tohmide 215-X | Sanho Chemical Co., Ltd. | Tohmide 215-X is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 50,000-70,000 mPa.s and a specific gravity of 0.97. Tohmide 215-X is most commonly used in coating formulation applications. | |
| Kingcure B-311 | Sanho Chemical Co., Ltd. | Kingcure B-311 is a low viscosity, modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 300-700 mPa.s. Kingcure B-311 is most commonly used in solvent-free coating formulation applicat...weiterlesen Kingcure B-311 is a low viscosity, modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 300-700 mPa.s. Kingcure B-311 is most commonly used in solvent-free coating formulation applications. verkürzen | |
| Kingmide 390-70 | Sanho Chemical Co., Ltd. | Kingmide 390-70 is a reactive polyamide-adduct type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Kingmide 390-70 is most commonly used in corrosion resistant paint formulation applicat...weiterlesen Kingmide 390-70 is a reactive polyamide-adduct type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Kingmide 390-70 is most commonly used in corrosion resistant paint formulation applications. verkürzen | |
| Kingmide 423-HPP | Sanho Chemical Co., Ltd. | Kingmide 423-HPP is a reactive modified polyamide type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 58-62%. Kingmide 423-HPP is most commonly used in corrosion resistant paint formulation appl...weiterlesen Kingmide 423-HPP is a reactive modified polyamide type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 58-62%. Kingmide 423-HPP is most commonly used in corrosion resistant paint formulation applications. verkürzen | |
| Kingmide 305-31 | Sanho Chemical Co., Ltd. | Kingmide 305-31 is a polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 29-33%. Kingmide 305-31 is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305-31MI | Sanho Chemical Co., Ltd. | Kingmide 305-31MI is a polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 29-33%. Kingmide 305-31MI is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305-50 | Sanho Chemical Co., Ltd. | Kingmide 305-50 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 48-52%. Kingmide 305-50 is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305-60 | Sanho Chemical Co., Ltd. | Kingmide 305-60 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 58-62%. Kingmide 305-60 is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305-70 | Sanho Chemical Co., Ltd. | Kingmide 305-70 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Kingmide 305-70 is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305-70X | Sanho Chemical Co., Ltd. | Kingmide 305-70X is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Kingmide 305-70X is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 315-80 | Sanho Chemical Co., Ltd. | Kingmide 315-80 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 78-82%. Kingmide 315-80 is most commonly used in heavy-duty primer coating formulation applications. | |
| Epokukdo YP-55 | Kukdo Chemical Co., Ltd. | Epokukdo YP-55 is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance one package baking finishes. Coatings based on the resin produce films accompanied with outstanding flexibility and adhesion as well as exceptional res...weiterlesen Epokukdo YP-55 is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance one package baking finishes. Coatings based on the resin produce films accompanied with outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. verkürzen | |
| Epokukdo YP-50 | Kukdo Chemical Co., Ltd. | Epokukdo YP-50 is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance one-package baking finishes. Coatings based on the resin produce films accompanied with outstanding flexibility and adhesion as well as exceptional res...weiterlesen Epokukdo YP-50 is an unmodified Bisphenol-A type solid epoxy resin designed for use in high performance one-package baking finishes. Coatings based on the resin produce films accompanied with outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. verkürzen | |
| DUROXYN® SEF 968w | Allnex | Duroxyn® SEF 968w is a non-drying epoxy-resin-ester. It is used as binder for glass fibre sizing. It is processed as approx. 33 % emulsion in water. For production of the emulsion Duroxyn SEF 968w is heated up at a temperature of approx. 50 °C. | Request Sample |
| Epokukdo YP-70 | Kukdo Chemical Co., Ltd. | Epokukdo YP-70 is a Bisphenol-A and F type solid epoxy resin designed for use in high performance one package baking finishes. Coatings based on the resin produce films accompanied with outstanding flexibility and adhesion as well as exceptional resistanc...weiterlesen Epokukdo YP-70 is a Bisphenol-A and F type solid epoxy resin designed for use in high performance one package baking finishes. Coatings based on the resin produce films accompanied with outstanding flexibility and adhesion as well as exceptional resistance to chemicals and solvents. verkürzen | |
| P5016 (50:50) | Huangshan Huizhou Jiajie Chemical Co., Ltd. | P5016 (50:50) is a carboxyl-saturated polyester resin that are yellow to clear flakes. This product can be used in combination with epoxy resin, in an equal mixture, to produce hybrid powder coatings that are receptive to the addition of pigments. | |
| Epotec® YDF 171 | Aditya Birla | Epotec® YDF 171 is a general-purpose, unmodified diglycidyl ether of bisphenol-F. This liquid epoxy resin offers good chemical resistance and flexibility. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesives, aut...weiterlesen Epotec® YDF 171 is a general-purpose, unmodified diglycidyl ether of bisphenol-F. This liquid epoxy resin offers good chemical resistance and flexibility. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesives, automotive coatings, and marine & industrial protective coatings. verkürzen | |
| BECKOPOX™ EM 2120w/45WA | Allnex | BECKOPOX® EM 2120W/45WA is an epoxy-amine-adduct dispersion in water, containing very small amounts of organic co-solvent. BECKOPOX® EM 2120W/45WA is suited to formulate water borne 1 pack anticorrosive primers and 1 pack single coats with good anticorros...weiterlesen BECKOPOX® EM 2120W/45WA is an epoxy-amine-adduct dispersion in water, containing very small amounts of organic co-solvent. BECKOPOX® EM 2120W/45WA is suited to formulate water borne 1 pack anticorrosive primers and 1 pack single coats with good anticorrosive properties, especially on smooth steel. verkürzen | Request Sample |
| AFCONA - 4202 | AFCONA Additives Sdn Bhd | AFCONA – 4202 is a modified polyurethane polymer that functions as a high molecular weight polymeric dispersant for the deflocculation of pigments. AFCONA – 4202 provides viscosity reduction and pigment stability, finding application in high solid coatings such as polyurethane, epoxy...weiterlesen AFCONA – 4202 is a modified polyurethane polymer that functions as a high molecular weight polymeric dispersant for the deflocculation of pigments. AFCONA – 4202 provides viscosity reduction and pigment stability, finding application in high solid coatings such as polyurethane, epoxy, and ultraviolet coatings. verkürzen | |
| AFCONA - 2727 | AFCONA Additives Sdn Bhd | AFCONA – 2727 is a silicone-based defoamer in a SBP spirit. This slightly hazy, clear yellow liquid functions as an anti-foam, de-aeration, and levelling agent for filled and unfilled epoxy, UPE, and polyurethane systems. AFCONA – 2727 finds application i...weiterlesen AFCONA – 2727 is a silicone-based defoamer in a SBP spirit. This slightly hazy, clear yellow liquid functions as an anti-foam, de-aeration, and levelling agent for filled and unfilled epoxy, UPE, and polyurethane systems. AFCONA – 2727 finds application in coatings. verkürzen | |
| GD-APP103 | Zhejiang Longyou GD Chemical Industry Co., Ltd. | GD-APP103 is a white free-flowing powder based on ammonium polyphosphate. This product will reduce water solubility, air hygroscopicity, viscosity in water, and increase fluidity of powder. GD-APP103 is applied in various types of coatings, epoxy resins...weiterlesen GD-APP103 is a white free-flowing powder based on ammonium polyphosphate. This product will reduce water solubility, air hygroscopicity, viscosity in water, and increase fluidity of powder. GD-APP103 is applied in various types of coatings, epoxy resins, and unsaturated resins. verkürzen | |
| Luna-add K C404 | DKSH | Luna-add K C404 is a masterbatch of a catalyst for carboxyl / epoxy reaction in saturated carboxylated polyester. Active content: 10%. It is use as catalyst for the formulation of interior and exterior protective thermosetting powder coatings, HYBRID, TGI...weiterlesen Luna-add K C404 is a masterbatch of a catalyst for carboxyl / epoxy reaction in saturated carboxylated polyester. Active content: 10%. It is use as catalyst for the formulation of interior and exterior protective thermosetting powder coatings, HYBRID, TGIC or cured with glycidylesters. verkürzen | Request Sample |
| Domide G-0240 | Kukdo Chemical Co., Ltd. | Domide G-0240 is a reactive low viscosity polyamide resin, which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. This product is well suited for use in the making of grouts, moldings and other types of adhesives and sea...weiterlesen Domide G-0240 is a reactive low viscosity polyamide resin, which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. This product is well suited for use in the making of grouts, moldings and other types of adhesives and sealants. verkürzen | |
| DOUBLEMER® 193A | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | DOUBLEMER® 193A is an epoxy acrylic oligomer with 50% TMPTA as diluent. This resin is characterized by fast cure, good dispersion and improved water/oil balance. This product is suitable for offset ink, adhesive for plastics and metals, and photoimageable...weiterlesen DOUBLEMER® 193A is an epoxy acrylic oligomer with 50% TMPTA as diluent. This resin is characterized by fast cure, good dispersion and improved water/oil balance. This product is suitable for offset ink, adhesive for plastics and metals, and photoimageable solder ink. verkürzen | |
| Ketjenflex® MH | Axcentive Sarl | Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printi...weiterlesen Ketjenflex® MH is a toluene sulfonamide in the form of a hard, transparent resin. It is used at a plasticizing co-resin in coatings, adhesives, and inks. Ketjenflex® MH can be used in nitrocellulose coatings, epoxy based coatings and adhesives, and printing inks. verkürzen | |
| Araldite® GT 7013 | Jubail Chemical Industries Co. | Araldite® GT 7013 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, electrical properties, corrosion resistance, gloss, adhesion properties, and filler loading. Araldite® GT 7013 is design...weiterlesen Araldite® GT 7013 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its mechanical properties, electrical properties, corrosion resistance, gloss, adhesion properties, and filler loading. Araldite® GT 7013 is designed for use in general and decorative coatings for metal furniture. verkürzen | |
| CAPCURE® 3-800 | Gabriel Performance Products | CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in ...weiterlesen CAPCURE® 3-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. verkürzen | |
| GABEPRO® GPM-800 | Gabriel Performance Products | GABEPRO® GPM-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and i...weiterlesen GABEPRO® GPM-800 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. verkürzen | |
| GABEPRO® GPM-8003 | Gabriel Performance Products | GABEPRO® GPM-8003 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and ...weiterlesen GABEPRO® GPM-8003 is a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. verkürzen | |
| Epokukdo BGE | Kukdo Chemical Co., Ltd. | Epokukdo BGE is a monofunctional reactive diluent of the glycidyl ether used in order to reduce the viscosity of Epoxy Resin and prevent lowering physical properties after being cured from adding diluent. BGE can be used in various paints, floor coating, ...weiterlesen Epokukdo BGE is a monofunctional reactive diluent of the glycidyl ether used in order to reduce the viscosity of Epoxy Resin and prevent lowering physical properties after being cured from adding diluent. BGE can be used in various paints, floor coating, etc. verkürzen | |
| Polurene LP 90 LV | S.A.P.I.C.I. SpA | Polurene LP 90 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and memb...weiterlesen Polurene LP 90 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and membranes. verkürzen | |
| Polurene LP 80 LV | S.A.P.I.C.I. SpA | Polurene LP 80 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and memb...weiterlesen Polurene LP 80 LV is a TDI-based branched polymer in DOA containing blocked and curable isocyanic groups. This product has very low viscosity and good rheology. It can be used to improve the flexibility of epoxy systems for adhesives, sealants, and membranes. verkürzen | |
| Eusorb UV-246 | Eutec Chemical Co., Ltd. | Eusorb UV-246 is a light yellow crystalline powder of 2,2’,4,4’-Tetrahydroxy benzophenone with a minimum melting point of 195℃. This product contains high absorption capacity for UV radiation in the region below 400 nm that is suited for epoxy, dyes and p...weiterlesen Eusorb UV-246 is a light yellow crystalline powder of 2,2’,4,4’-Tetrahydroxy benzophenone with a minimum melting point of 195℃. This product contains high absorption capacity for UV radiation in the region below 400 nm that is suited for epoxy, dyes and pigments. verkürzen | |
| Neu! ASCONIUM® 500 | ASCOTEC | ASCONIUM® 500 is a liquid corrosion inhibitor for long-term protection of DTM clear coats or paints. It is VOC and heavy metal free, tailored for post addition and designed for water-based formulations based on acrylic, alkyd, epoxy, and PU binders. | Request Sample |
| BP®-100 | Zhejiang Huate New Material Co., Ltd. | BP®-100 is a solvent based organoclay rheological additive. This product has ideal thickening and rheological properties, and is used in low, middle and high polarity systems. It is also commonly applied in unsaturated resins, epoxy resin systems, adhesiv...weiterlesen BP®-100 is a solvent based organoclay rheological additive. This product has ideal thickening and rheological properties, and is used in low, middle and high polarity systems. It is also commonly applied in unsaturated resins, epoxy resin systems, adhesives, sealants, paints, and coatings. verkürzen | |
| Epokukdo 1,4BDGE | Kukdo Chemical Co., Ltd. | Epokukdo 1,4 BDGE is a difunctional reactive diluent of aliphatic glycidyl ether used to reduce the viscosity of Epoxy Resin. Since difunctional diluents, in general, cause poor physical properties, the minimum amount of need should be used to achieve the...weiterlesen Epokukdo 1,4 BDGE is a difunctional reactive diluent of aliphatic glycidyl ether used to reduce the viscosity of Epoxy Resin. Since difunctional diluents, in general, cause poor physical properties, the minimum amount of need should be used to achieve the desired viscosity reduction. verkürzen | |
| Epokukdo 1,6HDGE | Kukdo Chemical Co., Ltd. | Epokukdo 1,6 HDGE is a difunctional reactive diluent of aliphatic glycidyl ether used to reduce the viscosity of Epoxy Resin. Since difunctional diluents, in general, cause poor physical properties, the minimum amount of need should be used to achieve the...weiterlesen Epokukdo 1,6 HDGE is a difunctional reactive diluent of aliphatic glycidyl ether used to reduce the viscosity of Epoxy Resin. Since difunctional diluents, in general, cause poor physical properties, the minimum amount of need should be used to achieve the desired viscosity reduction. verkürzen | |
| BurnEx Plus™ A1588LP | Nyacol Nano Technology | BurnEx Plus™ A1588LP is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.03 microns and it has applications in textiles, adhesives, coatin...weiterlesen BurnEx Plus™ A1588LP is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.03 microns and it has applications in textiles, adhesives, coatings, and water-based systems. verkürzen | |
| BurnEx Plus™ A1590 | Nyacol Nano Technology | BurnEx Plus™ A1590 is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.06 microns and it has applications in textiles, adhesives, coatings...weiterlesen BurnEx Plus™ A1590 is a dry powder colloidal antimony pentoxide (Sb2O5) for use as a synergist with halogenated flame retardants in high performance epoxy. Its ultimate particle size is 0.06 microns and it has applications in textiles, adhesives, coatings, and water-based systems. verkürzen | |
| Epotec® RD 109 | Aditya Birla | Epotec® RD 109 is a mono-glycidyl ether of C12-C13 fatty alcohol, primarily used as a reactive diluent for high viscosity epoxy resins. This product is ideal for use in self-leveling flooring applications, general purpose coatings, and general purpose adh...weiterlesen Epotec® RD 109 is a mono-glycidyl ether of C12-C13 fatty alcohol, primarily used as a reactive diluent for high viscosity epoxy resins. This product is ideal for use in self-leveling flooring applications, general purpose coatings, and general purpose adhesives. verkürzen | |
| ITAMID FL 560S | DKSH | ITAMID FL 560S is a modified polyamide-imidazolinic hardner for epoxy resins. It can be used for primers or adhesion promoters. Phenol free, Bisphenol A free, High adhesion on wet concrete, Quick Shore D development also at low temperature and Very good h...weiterlesen ITAMID FL 560S is a modified polyamide-imidazolinic hardner for epoxy resins. It can be used for primers or adhesion promoters. Phenol free, Bisphenol A free, High adhesion on wet concrete, Quick Shore D development also at low temperature and Very good handling. verkürzen | Request Sample |
| DYHARD® MCA10 | AlzChem AG | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
| Solvent Dispersion Black TRAFe® SB401G | Shaoxing Allway Nano Technology Co., Ltd. (Chemsfield) 绍兴奥唯特纳米科技有限公司（原上虞原野化学有限公司） | TRAFe® SB401G is a solvent black dispersion for industrial paints and wood coatings. It offers very good pigment color shade, color strength and well compatibility with acrylic acid, polyester, polyurethane, epoxy, silicone, middle and short oil alkyd, fl...weiterlesen TRAFe® SB401G is a solvent black dispersion for industrial paints and wood coatings. It offers very good pigment color shade, color strength and well compatibility with acrylic acid, polyester, polyurethane, epoxy, silicone, middle and short oil alkyd, fluoro and vinyl ester resins. verkürzen | |
| Solvent Dispersion Blue TRAFe® SB501 | Shaoxing Allway Nano Technology Co., Ltd. (Chemsfield) 绍兴奥唯特纳米科技有限公司（原上虞原野化学有限公司） | TRAFe® SB501 is a solvent blue dispersion for industrial paints and wood coatings. It offers very good pigment color shade, color strength and well compatibility with acrylic acid, polyester, polyurethane, epoxy, silicone, middle and short oil alkyd, fluo...weiterlesen TRAFe® SB501 is a solvent blue dispersion for industrial paints and wood coatings. It offers very good pigment color shade, color strength and well compatibility with acrylic acid, polyester, polyurethane, epoxy, silicone, middle and short oil alkyd, fluoro and vinyl ester resins. verkürzen | |
| RESYDROL® AX 246w/70BG | Allnex | Resydrol® AX 246W/70BG is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-grade...weiterlesen Resydrol® AX 246W/70BG is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-grade waterborne single-coat finishes for industrial applications. verkürzen | Request Sample |
| RESYDROL® AX 247w/70BGMP | Allnex | Resydrol® AX 247W/70BGMP is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-gra...weiterlesen Resydrol® AX 247W/70BGMP is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-grade waterborne single-coat finishes for industrial applications. verkürzen | Request Sample |
| CRYLCOAT® 1702-0 | Allnex | CRYLCOAT® 1702-0 is a low reactive carboxyl functional polyester resin for use with epoxy resin in a 70/30 ratio to manufacture hybrid powder coatings. Systems based on CRYLCOAT® 1702-0 exhibit excellent mechanical properties, very good flow and overbake ...weiterlesen CRYLCOAT® 1702-0 is a low reactive carboxyl functional polyester resin for use with epoxy resin in a 70/30 ratio to manufacture hybrid powder coatings. Systems based on CRYLCOAT® 1702-0 exhibit excellent mechanical properties, very good flow and overbake resistance. verkürzen | Request Sample |
| Epoxies® 20-3004 HV | Epoxies, Etc. | Epoxies® 20-3004 HV is a high viscosity, two part, chemical resistant epoxy system that has been developed for potting, coating and adhesive applications requiring superior chemical resistance. It exhibits outstanding bonds to a variety of substrates incl...weiterlesen Epoxies® 20-3004 HV is a high viscosity, two part, chemical resistant epoxy system that has been developed for potting, coating and adhesive applications requiring superior chemical resistance. It exhibits outstanding bonds to a variety of substrates including most metals and plastics. 20-3004's high viscosity prevents sagging and is noncorrosive. verkürzen | |
| CRYLCOAT® 1577-0 | Allnex | CRYLCOAT® 1577-0 is a medium reactive carboxyl functional polyester resin for use with epoxy resins EEW 700-900 in a 50/50 ratio for the manufacture of hybrid powder coatings. Formulations based on CRYLCOAT® 1577-0 exhibit good flexibility and storage sta...weiterlesen CRYLCOAT® 1577-0 is a medium reactive carboxyl functional polyester resin for use with epoxy resins EEW 700-900 in a 50/50 ratio for the manufacture of hybrid powder coatings. Formulations based on CRYLCOAT® 1577-0 exhibit good flexibility and storage stability. verkürzen | Request Sample |
| Razeen® LR 2253 | Jubail Chemical Industries Co. | Razeen® LR 2253 is a low viscosity epoxy resin based on Bisphenol A modified with an aliphatic diglycidyl ether. This product is characterized by its reactivity, surface hardness, flexibility, solvent resistance, and alkali resistance. Razeen® LR 2253 is ...weiterlesen Razeen® LR 2253 is a low viscosity epoxy resin based on Bisphenol A modified with an aliphatic diglycidyl ether. This product is characterized by its reactivity, surface hardness, flexibility, solvent resistance, and alkali resistance. Razeen® LR 2253 is used in the formulation of solvent-free coatings. verkürzen | |
| Razeen® SR 5198 | Jubail Chemical Industries Co. | Razeen® SR 5198 is a high melt viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flexibility, impact resistance, and chemical resistance. Razeen® SR 5198 is used in the formulation for baking primers and enamels ...weiterlesen Razeen® SR 5198 is a high melt viscosity, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flexibility, impact resistance, and chemical resistance. Razeen® SR 5198 is used in the formulation for baking primers and enamels as well as cold-curing coatings. verkürzen | |
| Epotec® YD 128 S | Aditya Birla | Epotec® YD 128 S is an unmodified liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it displays excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for u...weiterlesen Epotec® YD 128 S is an unmodified liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it displays excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in high solids solvent-free coatings and adhesives. verkürzen | |
| Epokukdo YDB-423A80 | Kukdo Chemical Co., Ltd. | Epokukdo YDB-423A80 is a brominated flame retardant epoxy resin mainly used for multi-layer board of PCB. It is well suited for the production of products requiring minimum viscosity during the cycle with a viscosity gradient before gelation and the time ...weiterlesen Epokukdo YDB-423A80 is a brominated flame retardant epoxy resin mainly used for multi-layer board of PCB. It is well suited for the production of products requiring minimum viscosity during the cycle with a viscosity gradient before gelation and the time required to effect gelation. verkürzen | |
| Araldite® GT 7072 | Jubail Chemical Industries Co. | Araldite® GT 7072 is a solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. A...weiterlesen Araldite® GT 7072 is a solid, unmodified epoxy resin based on Bisphenol A with a narrow molecular weight distribution. This product is characterized by its flexibility, impact strength, chemical resistance, corrosion resistance, and adhesion properties. Araldite® GT 7072 is designed for use in high performance coating systems. verkürzen | |
| WorléeAdd 902 | Worlée-Chemie G.m.b.H. | W´Add 902 wird als Benzoinersatz zur Entgasung und Entlüftung von Epoxy-, Polyester-, Acrylharz-, Hybrid- und anderen Pulverlacksystemen, einschließlich Primid XL 552 (Ems/UCB) verwendet. W´Add 902 reduziert außerdem die Schmelzviskosität und verbessert d...weiterlesen W´Add 902 wird als Benzoinersatz zur Entgasung und Entlüftung von Epoxy-, Polyester-, Acrylharz-, Hybrid- und anderen Pulverlacksystemen, einschließlich Primid XL 552 (Ems/UCB) verwendet. W´Add 902 reduziert außerdem die Schmelzviskosität und verbessert die Pigmentdispergierung sowie den Verlauf und verhindert Nadelstiche. verkürzen | |
| Epokukdo YD-014AM70 | Kukdo Chemical Co., Ltd. | Epokukdo YD-014 is a solid type standard epoxy resin derived from Bisphenol-A and Epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, Epokukdo YD-014AM70 dissolved in acetone an...weiterlesen Epokukdo YD-014 is a solid type standard epoxy resin derived from Bisphenol-A and Epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, Epokukdo YD-014AM70 dissolved in acetone and methyl cellosolve is generally used in many applications. verkürzen | |
| Epotec® YD 134 | Aditya Birla | Epotec® YD 134 is an unmodified, high viscosity, bisphenol-A-based semi-solid epoxy resin used to impart or improve toughness, flexibility, and adhesion. This product is ideal for use in adhesives, marine & industrial protective coatings, solvent-based co...weiterlesen Epotec® YD 134 is an unmodified, high viscosity, bisphenol-A-based semi-solid epoxy resin used to impart or improve toughness, flexibility, and adhesion. This product is ideal for use in adhesives, marine & industrial protective coatings, solvent-based coatings, construction coatings & systems, and electrical & electronic applications. verkürzen | |
| K-FLEX® 7301 | King Industries, Inc. | K-FLEX® 7301 is a reactive diluent with low viscosity and good compatibility with a variety of resins. It can be crosslinked with amino resins, polyisocyanates, polyamides, polyamines, unsaturated polymers, and is based on acetoacetate functionality. It is effective for both high solids and water-based applications for enhancing adhesion and corrosion resistance. This product appears as a clear amber liquid, terminates solvent popping/pinholes, and reduces induction time in epoxy/polyamide coatings. It is soluble in alcohols, ketones, esters, and aliphatic and aromatic hydrocarbons. It can be used in 2 component epoxy...weiterlesen K-FLEX® 7301 is a reactive diluent with low viscosity and good compatibility with a variety of resins. It can be crosslinked with amino resins, polyisocyanates, polyamides, polyamines, unsaturated polymers, and is based on acetoacetate functionality. It is effective for both high solids and water-based applications for enhancing adhesion and corrosion resistance. This product appears as a clear amber liquid, terminates solvent popping/pinholes, and reduces induction time in epoxy/polyamide coatings. It is soluble in alcohols, ketones, esters, and aliphatic and aromatic hydrocarbons. It can be used in 2 component epoxy/ polyamide coatings, isocyanate crosslined coatings, and UV cure and oxidizing polymerization. verkürzen | |
| HS2288 | Tianyi Chemical Engineering Material Co., Ltd. | HS2288, in the form of a transparent, yellowish, viscous liquid, is an epoxy hardening agent that can be used in primers, surface coatings, and industrial coatings. This product has a pH value between 8.0 and 9.0. Its density is between 1.08 and 1.15 g/...weiterlesen HS2288, in the form of a transparent, yellowish, viscous liquid, is an epoxy hardening agent that can be used in primers, surface coatings, and industrial coatings. This product has a pH value between 8.0 and 9.0. Its density is between 1.08 and 1.15 g/cm3. verkürzen | |
| Silane Coupling Agent KH-602 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-602 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing good adhesion, superior elongation, and flexibility at the polymer-substrate interface. It is used to promote adhesion between glass/mineral and metal surfaces-reinforcements, fillers/substrates-and resins that react with amino groups in systems such as PVC plastisol, polyurethane, or epoxy-based adhesives and sealant, or in phenolic and epoxy...weiterlesen KH-602 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing good adhesion, superior elongation, and flexibility at the polymer-substrate interface. It is used to promote adhesion between glass/mineral and metal surfaces-reinforcements, fillers/substrates-and resins that react with amino groups in systems such as PVC plastisol, polyurethane, or epoxy-based adhesives and sealant, or in phenolic and epoxy molding compounds. Its reduced alkoxy functionality might also be useful in waterborne systems such as latex coatings, adhesives and sealants, providing lower reactivity and therefore higher stability in the aqueous environment. verkürzen | |
| K-FLEX® XM-B301 | King Industries, Inc. | K-FLEX® XM-B301 is a low viscosity, acetoacetate functional reactive diluent that is compatible with variety of resins. It is mainly suggested to be used in epoxy/polyamide primers, but can also be used in systems crosslinked with amino resins or polyisoc...weiterlesen K-FLEX® XM-B301 is a low viscosity, acetoacetate functional reactive diluent that is compatible with variety of resins. It is mainly suggested to be used in epoxy/polyamide primers, but can also be used in systems crosslinked with amino resins or polyisocyanates. This product appears as a clear amber liquid and offers reduced induction time, adhesion, corrosion resistance, viscosity reduction, and elimates solvent popping and pinholes. It is soluble in esters, alcohols, aromatics, and ketones. It is insoluble in aliphatic hydrocarbons and water. K-FLEX® XM-B301 can be applied in epoxy-polyamide primers for industries like aerospace, automotive, marine, truck/bus/rail, and industrial maintenance. verkürzen | |
| Epokukdo YD-011AM70 | Kukdo Chemical Co., Ltd. | Epokukdo YD-011AM70 is a solid type standard epoxy resin derived from Bisphenol-A and Epichrolohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, Epokukdo YD-011AM70 dissolved in aceton...weiterlesen Epokukdo YD-011AM70 is a solid type standard epoxy resin derived from Bisphenol-A and Epichrolohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, Epokukdo YD-011AM70 dissolved in acetone and methyl cellosolve is generally used in many applications. verkürzen | |
| GENOMER* 2280 | Rahn AG | GENOMER* 2280 ist ein modifizierte Bisphenol A Epoxydiacrylat. Dieses Harz eignet sich als Bindemittel für radikalisch härtende Farben, Lacke und Klebstoffe. Verglichen mit Standart Bishenol A Epoxydiacrylaten ist GENOMER* 2280 flexibler und schlagzäher,...weiterlesen GENOMER* 2280 ist ein modifizierte Bisphenol A Epoxydiacrylat. Dieses Harz eignet sich als Bindemittel für radikalisch härtende Farben, Lacke und Klebstoffe. Verglichen mit Standart Bishenol A Epoxydiacrylaten ist GENOMER* 2280 flexibler und schlagzäher, besticht aber gleichzeitig durch hohe Reaktivität, Beständigkeit und Härte. verkürzen | Request Sample |
| Epokukdo YD-011MS65S | Kukdo Chemical Co., Ltd. | Epokukdo YD-011 is a solid type standard epoxy resin derived from Bisphenol-A and Epichlrlohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, Epokukdo YD-011MS65S dissolved in n-Butanol...weiterlesen Epokukdo YD-011 is a solid type standard epoxy resin derived from Bisphenol-A and Epichlrlohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, Epokukdo YD-011MS65S dissolved in n-Butanol, xylene and MIBK is generally used in many applications. verkürzen | |
| Epokukdo YD-011MTB50X | Kukdo Chemical Co., Ltd. | Epokukdo YD-011 is a solid type standard epoxy resin derived from Bisphenol-A and Epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, Epokukdo YD-011MTB50X dissolved in MIBK, to...weiterlesen Epokukdo YD-011 is a solid type standard epoxy resin derived from Bisphenol-A and Epichlorohydrin. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. Due to its special properties, Epokukdo YD-011MTB50X dissolved in MIBK, toluene and butyl cellosolve is generally used in many applications. verkürzen | |
| Grilonit® H 84024 | EMS-CHEMIE AG (PRIMID) | Grilonit® H 84024 is a modified cycloaliphatic polyamine adduct curing agent. It has good intercoat adhesion, tack and carbamate free surface, and good chemical resistance. This product is used as a high viscous amine hardener for solvent free coatings, curing with liquid epoxy...weiterlesen Grilonit® H 84024 is a modified cycloaliphatic polyamine adduct curing agent. It has good intercoat adhesion, tack and carbamate free surface, and good chemical resistance. This product is used as a high viscous amine hardener for solvent free coatings, curing with liquid epoxy resins. verkürzen | |
| DYHARD® MIA5 | AlzChem AG | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...weiterlesen DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. verkürzen | |
| Epotec® YDH 3000 | Aditya Birla | Epotec® YDH 3000 is a diglycidyl ether of hydrogenated bisphenol-A. This low viscosity epoxy resin features good uv light and weathering resistance. This product is ideal for use in high solids coatings (including baking finishes) and coatings for outdoor...weiterlesen Epotec® YDH 3000 is a diglycidyl ether of hydrogenated bisphenol-A. This low viscosity epoxy resin features good uv light and weathering resistance. This product is ideal for use in high solids coatings (including baking finishes) and coatings for outdoor application on metal, wood, and concrete surfaces. verkürzen | |
| Epotec® YD 128 J | Aditya Birla | Epotec® YD 128 J is an unmodified epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical strength and chemical resistance. This product is ideal for use in solvent-free co...weiterlesen Epotec® YD 128 J is an unmodified epoxy resin reaction product of bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical strength and chemical resistance. This product is ideal for use in solvent-free coatings, adhesives, and construction, electrical, & electronics applications. verkürzen | |
| Kingmide 74 | Sanho Chemical Co., Ltd. | Kingmide 74 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.95. Kingmide 74 is most commonly used in grout and adhesive formulation app...weiterlesen Kingmide 74 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.95. Kingmide 74 is most commonly used in grout and adhesive formulation applications. verkürzen | |
| Tohmide HR-11 | Sanho Chemical Co., Ltd. | Tohmide HR-11 is a high viscosity, polyaminoamide epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-15,000 mPa.s and a specific gravity of 0.98. Tohmide HR-11 is most commonly used in adhesive formulation appl...weiterlesen Tohmide HR-11 is a high viscosity, polyaminoamide epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-15,000 mPa.s and a specific gravity of 0.98. Tohmide HR-11 is most commonly used in adhesive formulation applications. verkürzen | |
| Fujicure 5420 | Sanho Chemical Co., Ltd. | Fujicure 5420 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure 5420 is most commonly used in concrete adhesive f...weiterlesen Fujicure 5420 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure 5420 is most commonly used in concrete adhesive formulation applications. verkürzen | |
| Kingcure 2010 | Sanho Chemical Co., Ltd. | Kingcure 2010 is a reactive polyamide epoxy resin curing agent in a light honey-colored viscous liquid form. This product has a viscosity of 1200-2000 mPa.s and a specific gravity of 0.96. Kingcure 2010 is most commonly used in concrete adhesive formulati...weiterlesen Kingcure 2010 is a reactive polyamide epoxy resin curing agent in a light honey-colored viscous liquid form. This product has a viscosity of 1200-2000 mPa.s and a specific gravity of 0.96. Kingcure 2010 is most commonly used in concrete adhesive formulation applications. verkürzen | |
| Kingcure 2040-MS | Sanho Chemical Co., Ltd. | Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation appli...weiterlesen Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation applications. verkürzen | |
| Kingcure K-863A | Sanho Chemical Co., Ltd. | Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applica...weiterlesen Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applications. verkürzen | |
| Kingcure X-2001 | Sanho Chemical Co., Ltd. | Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation application...weiterlesen Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation applications. verkürzen | |
| Tohmide 245 | Sanho Chemical Co., Ltd. | Tohmide 245 is a polyaminoamide-type epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 1500-3000 mPa.s and a specific gravity of 0.96. Tohmide 245 is most commonly used in bonding, sealing, and resin mortar formulation app...weiterlesen Tohmide 245 is a polyaminoamide-type epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 1500-3000 mPa.s and a specific gravity of 0.96. Tohmide 245 is most commonly used in bonding, sealing, and resin mortar formulation applications. verkürzen | |
| Borchi® Set 134 | OMG Borchers GmbH | Borchi® Set 134 is an anti-settling agent which also acts as a viscosity adjuster. It is suitable for paints containing solvents, and it effectively inhibits the formation of hard sediments, even when heavy pigments are used. With its anti-settling action, Borchi® Set 134 is an excellent suspending agent for pigments and fillers. lt is also highly effective when used with heavy pigments and metal powders, offering particular advantages in zinc-rich paints for example. This product is an effective thixotropic agent and thickener for paints based on cold-curing epoxy resins,epoxy...weiterlesen Borchi® Set 134 is an anti-settling agent which also acts as a viscosity adjuster. It is suitable for paints containing solvents, and it effectively inhibits the formation of hard sediments, even when heavy pigments are used. With its anti-settling action, Borchi® Set 134 is an excellent suspending agent for pigments and fillers. lt is also highly effective when used with heavy pigments and metal powders, offering particular advantages in zinc-rich paints for example. This product is an effective thixotropic agent and thickener for paints based on cold-curing epoxy resins,epoxy resin esters, alkyd resins, chlorinated and cyclised rubber, DD systems, vinyl resin polymers and copolymers. verkürzen | |
| DOUBLEMER® 1703 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | DOUBLEMER 1703 bisphenol A epoxy acrylate oligomer modified with amine. It is designed for use in ultraviolet light (UV) or electron beam (EB) coating systems. The cured films ofDOUBLEMER® 1703 exhibit improved flexibility, exceptionally fast cure and exc...weiterlesen DOUBLEMER 1703 bisphenol A epoxy acrylate oligomer modified with amine. It is designed for use in ultraviolet light (UV) or electron beam (EB) coating systems. The cured films ofDOUBLEMER® 1703 exhibit improved flexibility, exceptionally fast cure and excellent chemical resistance properties similar to the typical epoxy resin. Formulated UV/EB curable products containing DOUBLEMER® 1703 may be applied via lithographic, screen, direct or reverse roll and curtain coating methods. This product is recommended for use in: clear coatings for paper, coatings for rigid and flexible plastics, top coats for wood, lithographic ink vehicles, screen ink vehicles and vehicles for metal decorating inks and clear coatings. verkürzen |
