| CV1-2646 | NuSil Silicone Technology 1 | CV1-2646 is a silicone that is electrically conductive and can be used in applications that require a broad operating temperature range. This product can be used to for EMI and RFI shielding in electrical and space applications. It can also be utilized as...weiterlesen CV1-2646 is a silicone that is electrically conductive and can be used in applications that require a broad operating temperature range. This product can be used to for EMI and RFI shielding in electrical and space applications. It can also be utilized as an adhesive to bond covers on housings or any application where a non-flowable material is needed. verkürzen | |
| CV1-2960 | NuSil Silicone Technology 1 | CV1-2960 is a thermally conductive silicone that can be used to adhere base plates, integrated circuit substrates, and heat sinks or other configurations that require a flowable to limited flow material. This product is also suitable for applications that...weiterlesen CV1-2960 is a thermally conductive silicone that can be used to adhere base plates, integrated circuit substrates, and heat sinks or other configurations that require a flowable to limited flow material. This product is also suitable for applications that require low outgassing under extreme operating conditions. It is able to provide heat transfer between electronic components and their heat sinks. verkürzen | |
| CV1-2964 | NuSil Silicone Technology 1 | CV1-2964 is a silicone elastomer the has controlled volatility and can be used to transfer heat between heat sinks and electrical/electronic components. It can also be utilized for applications requiring low outgassing under extreme operating conditions. ...weiterlesen CV1-2964 is a silicone elastomer the has controlled volatility and can be used to transfer heat between heat sinks and electrical/electronic components. It can also be utilized for applications requiring low outgassing under extreme operating conditions. This product may be used as an adhesive for integrated circuit substrates, base plates, heat sinks or where grooves require a limited flow material. verkürzen | |
| CV10-2500 | NuSil Silicone Technology 1 | CV10-2500 is an optically clear silicone system that is an ideal adhesive in low-strength applications such as with solar cell arrays where clarity and low volatility are important. It serves as an embedding or potting compound for electronic assemblies a...weiterlesen CV10-2500 is an optically clear silicone system that is an ideal adhesive in low-strength applications such as with solar cell arrays where clarity and low volatility are important. It serves as an embedding or potting compound for electronic assemblies and components. It will protect against extreme humidity, radiation, thermal and mechanical stress. verkürzen | |
| CV10-2568 | NuSil Silicone Technology 1 | CV10-2568 is a two part RTV ablative silicone that can be used as a bonding, sealing, or potting material in electronic and space applications. This product will provide radiation resistance, low thermal conductivity, oxidation stability and thermal stabi...weiterlesen CV10-2568 is a two part RTV ablative silicone that can be used as a bonding, sealing, or potting material in electronic and space applications. This product will provide radiation resistance, low thermal conductivity, oxidation stability and thermal stability. It can also be especially useful to bond solar cells to solar array panels as it has a broad operating temperature range. verkürzen | |
| CV14-2500 | NuSil Silicone Technology 1 | CV14-2500 is a controlled volatility silicone system that incorporates an adhesion promoter and has a low viscosity. It can serve as a potting or embedding compound for electronic components to provide protection from extreme, radiation, humidity, mechani...weiterlesen CV14-2500 is a controlled volatility silicone system that incorporates an adhesion promoter and has a low viscosity. It can serve as a potting or embedding compound for electronic components to provide protection from extreme, radiation, humidity, mechanical and thermal stress. This product can also be used to adhere covers onto housings, or any applications where grooves require a material that has superior flow. verkürzen | |
| CV15-2500 | NuSil Silicone Technology 1 | CV15-2500 is an optically clear controlled volatile silicone that is ideal for applications that require a low viscosity for superior flow. It can be utilized as an adhesive in applications such as solar cell arrays where low volatility and clarity are i...weiterlesen CV15-2500 is an optically clear controlled volatile silicone that is ideal for applications that require a low viscosity for superior flow. It can be utilized as an adhesive in applications such as solar cell arrays where low volatility and clarity are important. This product also serves as an embedding compound for electronic assemblies and it protects them from extreme humidity, radiation, mechanical and thermal stress. verkürzen | |
| CV16-2500 | NuSil Silicone Technology 1 | CV16-2500 is a silicone elastomer that is designed for enhanced performance in extreme low and high temperatures. It can protect electronic components from environmental hazards such as humidity and radiation. This product is ideal for applications that ...weiterlesen CV16-2500 is a silicone elastomer that is designed for enhanced performance in extreme low and high temperatures. It can protect electronic components from environmental hazards such as humidity and radiation. This product is ideal for applications that require super flow because of its low viscosity. verkürzen | |
| CV2-1142 | NuSil Silicone Technology 1 | CV2-1142 is a non-corrosive, non-slumping, translucent RTV silicone adhesive/sealant that has controlled volatility. It can be used in applications that require low outgassing under extreme operating conditions. This product is useful for sealing and bond...weiterlesen CV2-1142 is a non-corrosive, non-slumping, translucent RTV silicone adhesive/sealant that has controlled volatility. It can be used in applications that require low outgassing under extreme operating conditions. This product is useful for sealing and bonding in applications such as overhead or vertical joints that require a non-slumping, one-part material. It can also be utilized as a sealant, caulking, adhesive or potting material in space and electrical applications that require minimal outgassing. verkürzen | |
| CV2-1147 | NuSil Silicone Technology 1 | CV2-1147 is a silicone atomic oxygen protective coating that can be used in applications that require a broad operating temperature range. This coating will help protect electrical components from radiation and thermal stress. This product is also suitabl...weiterlesen CV2-1147 is a silicone atomic oxygen protective coating that can be used in applications that require a broad operating temperature range. This coating will help protect electrical components from radiation and thermal stress. This product is also suitable to use in applications that require low outgassing in extreme operating conditions. verkürzen | |
| CV2-1148 | NuSil Silicone Technology 1 | CV2-1148 is a black silicone oxygen protective coating that can be used for bonding applications where a non-slumping and one-part material is required. This product can also provide excellent joint coverage and thin section encapsulation. It is ideal for...weiterlesen CV2-1148 is a black silicone oxygen protective coating that can be used for bonding applications where a non-slumping and one-part material is required. This product can also provide excellent joint coverage and thin section encapsulation. It is ideal for applications that require minimal volatile condensables under extreme operating conditions. verkürzen | |
| CV2-1161 | NuSil Silicone Technology 1 | CV2-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid particulate contaminants. It is able to withstand normal pressure variations as well as high temperature exposure. This product is ideal...weiterlesen CV2-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid particulate contaminants. It is able to withstand normal pressure variations as well as high temperature exposure. This product is ideal for bonding and adhering silicone elastomers, paper, metals, glass, fabric, films, and some synthetics. It can also be used for applications that require low outgassing and minimal volatile condensable materials. verkürzen | |
| CV2-2289-1 | NuSil Silicone Technology 1 | CV2-2289-1 is encapsulating silicone elastomer that offers medium strength, low modulus, and a broad operating temperature range. It is an ideal adhesive application where large surface areas must be covered. It also provides protection for electrical com...weiterlesen CV2-2289-1 is encapsulating silicone elastomer that offers medium strength, low modulus, and a broad operating temperature range. It is an ideal adhesive application where large surface areas must be covered. It also provides protection for electrical components against shock, vibration, moisture, dust, chemicals and other environmental hazards. verkürzen | |
| CV2-2566 | NuSil Silicone Technology 1 | CV2-2566 is a two-part, thixotropic red RTV silicone that can be used as a potting material, sealant, caulking, or adhesive in space and electronic applications where a high vacuum environment is encountered. This is a versatile product because in can fun...weiterlesen CV2-2566 is a two-part, thixotropic red RTV silicone that can be used as a potting material, sealant, caulking, or adhesive in space and electronic applications where a high vacuum environment is encountered. This is a versatile product because in can function within a broad operating temperature range. It can also be used to bond solar cells to solar array panels. verkürzen | |
| CV2-2640 | NuSil Silicone Technology 1 | CV2-2640 is a static dissipative RTV silicone that can be used to protect electrical components and sensitive devices from condensation building up. This product can also be used for EMI and RFI shielding in electronic and space applications. It is a non-...weiterlesen CV2-2640 is a static dissipative RTV silicone that can be used to protect electrical components and sensitive devices from condensation building up. This product can also be used for EMI and RFI shielding in electronic and space applications. It is a non-flowing material so it can be used to adhere covers onto housings. verkürzen | |
| CV2-2644 | NuSil Silicone Technology 1 | CV2-2644 is a two-part, tan colored electrically conductive silicone adhesive/sealant. This product is well suited to use with form-in-place conductive gaskets. It meets the low outgas specifications outlined by NASA and the European Space Agency so it ca...weiterlesen CV2-2644 is a two-part, tan colored electrically conductive silicone adhesive/sealant. This product is well suited to use with form-in-place conductive gaskets. It meets the low outgas specifications outlined by NASA and the European Space Agency so it can be used in applications that require low outgassing under extreme operating conditions. verkürzen | |
| CV2-2646 | NuSil Silicone Technology 1 | CV2-2646 is an electrically conductive RTV silicone that is used for RFI and EMI shielding in electronic and space applications. This product is able to maintain electric conductivity over a broad operating temperature range. It is well suited for formed-...weiterlesen CV2-2646 is an electrically conductive RTV silicone that is used for RFI and EMI shielding in electronic and space applications. This product is able to maintain electric conductivity over a broad operating temperature range. It is well suited for formed-in-place conductive gaskets and designed for enhanced performance in extreme low and high temperatures. verkürzen | |
| CV2-2946 | NuSil Silicone Technology 1 | CV2-2946 is a volatility controlled silicone that cures with the addition of heat and is desgned to allow bond line thickness of <=50 Microns. It can be used to adhere integrated circuit substrates, base plates, heat sinks or where a non-flowable material...weiterlesen CV2-2946 is a volatility controlled silicone that cures with the addition of heat and is desgned to allow bond line thickness of <=50 Microns. It can be used to adhere integrated circuit substrates, base plates, heat sinks or where a non-flowable material is required. This product also has the ability to provide heat transfer between electrical/electronic component and their heat sinks. verkürzen | |
| CV3-1142 | NuSil Silicone Technology 1 | CV3-1142 is a one-part translucent material that is also a non-slumping silicone RTV. It is best used as a sealant, caulk, adhesive or potting material in electrical and space applications that require low outgassing, and minimal volatile condensables und...weiterlesen CV3-1142 is a one-part translucent material that is also a non-slumping silicone RTV. It is best used as a sealant, caulk, adhesive or potting material in electrical and space applications that require low outgassing, and minimal volatile condensables under extreme operating conditions. This product also provides corrosion protection for sensitive circuits such as connectors, switches and other electrical components. It can also be utilized in bonding and sealing applications that require a non-slumping material. verkürzen | |
| CV3-1144-1 | NuSil Silicone Technology 1 | CV3-1144-1 is a white silicone dispersion that has a non-corrosive cure which makes it an ideal coating for electronics components. This product can be utilized as a protective overcoating for atomic oxygen resistance in space applications. It also provid...weiterlesen CV3-1144-1 is a white silicone dispersion that has a non-corrosive cure which makes it an ideal coating for electronics components. This product can be utilized as a protective overcoating for atomic oxygen resistance in space applications. It also provides protection from thermal stress and radiation. verkürzen | |
| CV3-1161 | NuSil Silicone Technology 1 | CV3-1161 is a two part pressure sensitive adhesive that has properties that are unaffected by normal pressure variations and high temperature exposure. It can be used for bonding and adhering silicone elastomers, glass, organic rubbers, fabric, and films...weiterlesen CV3-1161 is a two part pressure sensitive adhesive that has properties that are unaffected by normal pressure variations and high temperature exposure. It can be used for bonding and adhering silicone elastomers, glass, organic rubbers, fabric, and films. This product also meets the low outgas specifications outlined in NASA and the European Space Agency. verkürzen | |
| CV3-2289-1 | NuSil Silicone Technology 1 | CV3-2289-1 is a two-part white silicone elastomer, that is an ideal adhesive where a large surface area must be covered. It has the ability to provide protection to electrical components against harsh environments where shock, vibration, dust and moisture...weiterlesen CV3-2289-1 is a two-part white silicone elastomer, that is an ideal adhesive where a large surface area must be covered. It has the ability to provide protection to electrical components against harsh environments where shock, vibration, dust and moisture are a threat. It is also an ideal product for applications that require minimal outgassing. verkürzen | |
| CV3-2500 | NuSil Silicone Technology 1 | CV3-2500 is an optically clear silicone that is has controlled volatility. It is an ideal product for applications that require a low viscosity to create a superior flow and low outgassing. This is how it helps keep condensation from affecting sensitive d...weiterlesen CV3-2500 is an optically clear silicone that is has controlled volatility. It is an ideal product for applications that require a low viscosity to create a superior flow and low outgassing. This is how it helps keep condensation from affecting sensitive devices. It can also be utilized as an adhesive for projects involving solar arrays. verkürzen | |
| CV3-2640 | NuSil Silicone Technology 1 | CV3-2640 is a static dissipative silicone that has controlled volatility and cures at room temperature. This product can be utilized as shielding for RFI and EMI in space and electronic applications. It can also be used to adhere covers onto housings or f...weiterlesen CV3-2640 is a static dissipative silicone that has controlled volatility and cures at room temperature. This product can be utilized as shielding for RFI and EMI in space and electronic applications. It can also be used to adhere covers onto housings or for any application where grooves require a non-flowable to limited flow material. verkürzen | |
| CV4-1161-5 | NuSil Silicone Technology 1 | CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic compone...weiterlesen CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic components and is designed to withstand extreme temperature/pressure variations. verkürzen | |
| CV4-2289-1 | NuSil Silicone Technology 1 | CV4-2289-1 is a thixotropic silicone elastomer that can be used as an adhesive that offers superior tear strength. This silicone also demonstrates flexibility at extremely low temperatures with a stiffening temperature of approximately -115°C. It can be u...weiterlesen CV4-2289-1 is a thixotropic silicone elastomer that can be used as an adhesive that offers superior tear strength. This silicone also demonstrates flexibility at extremely low temperatures with a stiffening temperature of approximately -115°C. It can be used to protect electronic components, cable harness breakouts, seals, and gaskets from harsh environmental conditions. verkürzen | |
| CV4-2500 | NuSil Silicone Technology 1 | CV4-2500 is a two-part, optically clear silicone system that has a controlled volatility. It is suitable to be used as an adhesive in low-strength applications such as bonding solar cell arrays where low volatility and clarity are needed. It can also be u...weiterlesen CV4-2500 is a two-part, optically clear silicone system that has a controlled volatility. It is suitable to be used as an adhesive in low-strength applications such as bonding solar cell arrays where low volatility and clarity are needed. It can also be used as an embedding or potting compound for electronic assemblies that need to be protected from extremes in radiation, humidity, mechanical and thermal stress. verkürzen | |
| CV7-1142-1 | NuSil Silicone Technology 1 | CV7-1142-1 is a non corrosive material that has a white color and it is a non-slumping silicone RTV. It can be used as a caulking, adhesive or sealant that protects sensitive circuits, connectors and switches in space applications. This product has a broa...weiterlesen CV7-1142-1 is a non corrosive material that has a white color and it is a non-slumping silicone RTV. It can be used as a caulking, adhesive or sealant that protects sensitive circuits, connectors and switches in space applications. This product has a broad operating temperature range so it can withstand hot and cold conditions. It also can be used for sealing openings in modules or housings where grooves or other configurations require a non-flowable to limited flow material. verkürzen | |
| CV7-2289-1 | NuSil Silicone Technology 1 | CV7-2289-1 is an encapsulating silicone elastomer that is best used for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. In these extreme conditions this product will help protect electrical sy...weiterlesen CV7-2289-1 is an encapsulating silicone elastomer that is best used for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. In these extreme conditions this product will help protect electrical systems against environmental hazards such as vibration, shock, dust and chemicals. verkürzen | |
| Cyclohexane | Braskem S.A. | Cyclohexane is a cyclic aliphatic hydrocarbon solvent. | |
| Cyclohexyl vinyl ether, CHVE | BASF SE, Intermediates Division 巴斯夫中间体 | Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vin...weiterlesen Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. Copolymers with Cyclohexyl vinyl ether are used for solvent based anti-corrosion coatings. verkürzen | |
| D-101 | BlueSky Chemical Co., Ltd. | D-101, also known as tetramethoxysilane, can be used to provide a scratch-resistant coating and impact modifiers for glass. It can also be used as a drying agent in sealing formulations. | |
| D-230 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | D-230 Polyether Amine is a diamine on the base of copolymer backbone with an average molecular weight of 220. This product has a specific gravity of 0.9080 g/cm3 and a pH value of 11.6. D-230 Polyether Amine provides light color, low viscosity, low vapor ...weiterlesen D-230 Polyether Amine is a diamine on the base of copolymer backbone with an average molecular weight of 220. This product has a specific gravity of 0.9080 g/cm3 and a pH value of 11.6. D-230 Polyether Amine provides light color, low viscosity, low vapor pressure, and high primary amine content to coatings and adhesives. verkürzen | |
| D-31 | BlueSky Chemical Co., Ltd. | D-31 is a blend of methyltris (methylethylketoxime) silane and tetrakis (methylethylketoxime) silane. This product is a cross-linking agent for oxime silicone sealants and is also a liquid raw material for neutral condensation curing silicone sealants. | |
| D-32 | BlueSky Chemical Co., Ltd. | D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants...weiterlesen D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.98 g/ml. verkürzen | |
| D-33 | BlueSky Chemical Co., Ltd. | D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0...weiterlesen D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.99 g/ml. verkürzen | |
| D-34 | BlueSky Chemical Co., Ltd. | D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330...weiterlesen D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330 g/ml. verkürzen | |
| D-35 | BlueSky Chemical Co., Ltd. | D-35 is a tetra-oximino silane in toluene. This product is a neutral curing agent for silicone sealant formulations. Its density at 25 degrees Celsius is 0.930 g/ml. | |
| D-36 | BlueSky Chemical Co., Ltd. | D-36 is a phenyltris (methyl ethylketoximino) silane. This product is a cross-linking agent for one-component neutral cure silicone sealants. Its density at 25 degrees Celsius is 0.995 g/ml. | |
| D-400 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | D-400 Polyether Amine is a colorless to pale yellow product with a slight haze which is characterized by repeating units in the backbone. This product has an average molecular weight of 400 and a water weight percentage of less than 0.25. D-400 Polyether ...weiterlesen D-400 Polyether Amine is a colorless to pale yellow product with a slight haze which is characterized by repeating units in the backbone. This product has an average molecular weight of 400 and a water weight percentage of less than 0.25. D-400 Polyether Amine acts as a curing agent which provides flexibility and toughness in adhesives. verkürzen | |
| D-60 | BlueSky Chemical Co., Ltd. | D-60 is a di(1,3-propanediol)-bis(ethylacetoacetate) titanium. This product can be used to crosslink and promote adhesion in silicone sealants, adhesives, binders, and paints. Its density at 25 degrees Celsius lies between 1.05 and 1.1 g/ml. | |
| D-70 | BlueSky Chemical Co., Ltd. | D-70 is a dibutyltindiacetate. This product is a catalyst for polyurethane coating and a curing agent for acetoxy sealants. Its density at 25 degrees Celsius is 1.32 g/ml. | |
| D-90 | BlueSky Chemical Co., Ltd. | D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/m...weiterlesen D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/ml. verkürzen | |
| D-91 | BlueSky Chemical Co., Ltd. | D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's de...weiterlesen D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. verkürzen | |
| D-92 | BlueSky Chemical Co., Ltd. | D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density ...weiterlesen D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. verkürzen | |
| DA-100 | DCC (Dairen Chemical Corp.) | DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emu...weiterlesen DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100 is also a base emulsion for floor, wall, or ceiling adhesives. verkürzen | |
| DA-100L | DCC (Dairen Chemical Corp.) | DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base e...weiterlesen DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100L is also a base emulsion for floor, wall, or ceiling adhesives. verkürzen | |
| DA-101 | DCC (Dairen Chemical Corp.) | DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...weiterlesen DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-101 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-101 is also a base emulsion for floor, wall, or ceiling adhesives. verkürzen | |
| DA-102 | DCC (Dairen Chemical Corp.) | DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...weiterlesen DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2500-3700 mPa.s. DA-102 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102 is also a base emulsion for floor, wall, or ceiling adhesives. verkürzen | |
| DA-102H | DCC (Dairen Chemical Corp.) | DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...weiterlesen DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3500-4500 mPa.s. DA-102H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102H is also a base emulsion for floor, wall, or ceiling adhesives. verkürzen | |
| DA-103 | DCC (Dairen Chemical Corp.) | DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...weiterlesen DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-103 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103 is also a base emulsion for floor, wall, or ceiling adhesives. verkürzen | |
| DA-103H | DCC (Dairen Chemical Corp.) | DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...weiterlesen DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3200-4200 mPa.s. DA-103H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103H is also a base emulsion for floor, wall, or ceiling adhesives. verkürzen | |
| DA-104 | DCC (Dairen Chemical Corp.) | DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...weiterlesen DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2000-3000 mPa.s. DA-104 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-104 is also a base emulsion for floor, wall, or ceiling adhesives. verkürzen | |
| DA-107 | DCC (Dairen Chemical Corp.) | DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...weiterlesen DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1000-2500 mPa.s. DA-107 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-107 is also a base emulsion for floor, wall, or ceiling adhesives. verkürzen | |
| DA-1100 | DCC (Dairen Chemical Corp.) | DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 ca...weiterlesen DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 can be used in tile adhesives. verkürzen | |
| DA-111 | DCC (Dairen Chemical Corp.) | DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...weiterlesen DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. It is designed as a medium Tg product at around approximately 14 °C. DA-111 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-111 is also a base emulsion for floor, wall, or ceiling adhesives. verkürzen | |
| DA-1120 | DCC (Dairen Chemical Corp.) | DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 ca...weiterlesen DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 can be used in tile adhesives. verkürzen | |
| DA-1122 | DCC (Dairen Chemical Corp.) | DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 ca...weiterlesen DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 can be used in tile adhesives. verkürzen | |
| DA-1126 | DCC (Dairen Chemical Corp.) | DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds....weiterlesen DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds. It is used in ceramic tile adhesives, and EIFS. verkürzen | |
| DA-1130 | DCC (Dairen Chemical Corp.) | DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....weiterlesen DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. It can be used in tile adhesives. verkürzen | |
| DA-1133 | DCC (Dairen Chemical Corp.) | DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....weiterlesen DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1133 is used in construction adhesives. verkürzen | |
| DA-117 | DCC (Dairen Chemical Corp.) | DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexib...weiterlesen DA-117 is a non-plasticized, aqueous, milky, white dispersion of a vinyl acetate-ethylene copolymer with high solid contents developed to provide a versatile base for construction applications. After evaporation of its water content, DA-117 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 500-1500 mPa.s. DA-117 is used in joint compounds and decorative coatings, and carpet back coatings. verkürzen | |
| DA-1200 | DCC (Dairen Chemical Corp.) | DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....weiterlesen DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1200 is used in tile adhesives. verkürzen | |
| DA-1210 | DCC (Dairen Chemical Corp.) | DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....weiterlesen DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1210 is used in construction adhesives, sealing slurries, and repair mortars. verkürzen | |
| DA-125 | DCC (Dairen Chemical Corp.) | DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive f...weiterlesen DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-125 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-125 is also a base emulsion for floor, wall, or ceiling adhesives. verkürzen | |
| DA-128 | DCC (Dairen Chemical Corp.) | DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive f...weiterlesen DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128 is also a base emulsion for floor, wall, or ceiling adhesives. verkürzen | |
| DA-128H | DCC (Dairen Chemical Corp.) | DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesiv...weiterlesen DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128H is also a base emulsion for floor, wall, or ceiling adhesives. verkürzen | |
| DA-1400 | DCC (Dairen Chemical Corp.) | DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....weiterlesen DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1400 is used in tile adhesives, and sealing slurries. verkürzen | |
| DA-1410 | DCC (Dairen Chemical Corp.) | DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....weiterlesen DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1410 is used in construction adhesives. verkürzen | |
| DA-1420 | DCC (Dairen Chemical Corp.) | DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compound...weiterlesen DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1420 is used in tile adhesives. verkürzen | |
| DA-1430 | DCC (Dairen Chemical Corp.) | DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...weiterlesen DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1430 is used in tile adhesives, and trowelling compounds. verkürzen | |
| DA-1450 | DCC (Dairen Chemical Corp.) | DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...weiterlesen DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1450 is used in tile adhesives, and construction adhesives. verkürzen | |
| DA-179 | DCC (Dairen Chemical Corp.) | DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is u...weiterlesen DA-179 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. The soft, flexible polymer makes use of a surfactant protection system to provide excellent water resistance and soft, flexible films. DA-179 is used in high performance waterproof coatings. verkürzen | |
| DA-180L | DCC (Dairen Chemical Corp.) | DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L ...weiterlesen DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L is used in general adhesives. verkürzen | |
| DA-183 | DCC (Dairen Chemical Corp.) | DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mo...weiterlesen DA-183 is a vinyl acetate-ethylene copolymer emulsion for cement or plaster based mortars. The addition causes of DA-183 increases the adhesion of mortars to other mineral surfaces. These modified coatings show much better elasticity. DA-183 is used in mortars or grouts. verkürzen | |
| DA-265 | DCC (Dairen Chemical Corp.) | DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration...weiterlesen DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration by UV-light, oxygen and the ozone. DA-265 is used in mineral coatings, and floor, wall, or ceiling adhesives. . verkürzen | |
| DA-265H | DCC (Dairen Chemical Corp.) | DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, disco...weiterlesen DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, discoloration, oxygen, and the ozone. Because of DA-265H's adjusted ethylene content, this film is extremely tacky and uses no plasticizers to get softness or flexibility. DA-265H is used in mineral coatings, and floor, wall, or ceiling adhesives. verkürzen | |
| DA-310 | DCC (Dairen Chemical Corp.) | DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for seali...weiterlesen DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for sealing plastics or metals to other substrates, and as a raw material for adhesives. verkürzen | |
| DA-3510 | DCC (Dairen Chemical Corp.) | DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, fle...weiterlesen DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, flexural strength, plasticity, and workability of modified compounds. DA-3510 is recommended for use as a sole binder for making construction adhesives and seals. verkürzen | |
| DA-371 | DCC (Dairen Chemical Corp.) | DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 i...weiterlesen DA-371 is an aqueous, non-plasticized, milky white emulsion synthesized from vinyl acetate and ethylene. DA-371 with different paint formulations can bring about many changes of the gloss of indoor-paints in accordance with the customers’ demand. DA-371 is used in low VOC interior paints, semi flat and semi gloss paints, deep shade paints, exterior paints, and plaster and textured coatings. verkürzen | |
| DA-500 | DCC (Dairen Chemical Corp.) | DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in...weiterlesen DA-500 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-500 forms a flexible film with adhesive properties for a broad range of applications. DA-500 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. verkürzen | |
| DA-502 | DCC (Dairen Chemical Corp.) | DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...weiterlesen DA-502 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-502 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 3000-4000 mPa.s. DA-502 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. verkürzen | |
| DA-511 | DCC (Dairen Chemical Corp.) | DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...weiterlesen DA-511 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-511 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-511 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. verkürzen | |
| DA-523 | DCC (Dairen Chemical Corp.) | DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosit...weiterlesen DA-523 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-523 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 700-1000 mPa.s. DA-523 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. verkürzen | |
| DA-524 | DCC (Dairen Chemical Corp.) | DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. I...weiterlesen DA-524 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-524 forms a tough but still flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-524 is used in base for EPI wood glue systems, as a base emulsion for floor, wall or ceiling adhesives, and plastic (PVC) or metal foil bonding. verkürzen | |
| DA-6200 | DCC (Dairen Chemical Corp.) | DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-formin...weiterlesen DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-forming agents. DA-6200 is recommended for blending with inorganic binders such as cement, hydrated lime to modify mortar hydration systems, tile adhesives, EIFS, and finishing plasters. verkürzen | |
| DA-652 | DCC (Dairen Chemical Corp.) | DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications....weiterlesen DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 15000-25000 mPa.s. DA-652 is used as base emulsion for floor, wall, or ceiling adhesives. verkürzen | |
| DA-691 | DCC (Dairen Chemical Corp.) | DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691...weiterlesen DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691's main use is in EPI wood glue. verkürzen | |
| DA-901 | DCC (Dairen Chemical Corp.) | DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant p...weiterlesen DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant property. DA-901 is used as a general adhesive and is specially suitable for wood applications. verkürzen | |
| DA-908 | DCC (Dairen Chemical Corp.) | DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and...weiterlesen DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and is a cloudy substance initially. DA-908 is used as a base emulsion for general adhesives and EPI wood adhesives. verkürzen | |
| DA-910 | DCC (Dairen Chemical Corp.) | DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics an...weiterlesen DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. verkürzen | |
| DA-920 | DCC (Dairen Chemical Corp.) | DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics a...weiterlesen DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. verkürzen | |
| DA-930 | DCC (Dairen Chemical Corp.) | DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics a...weiterlesen DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. verkürzen | |
| DAPRO® AP 1622 | Elementis 海名斯特殊化学 | DAPRO® AP 1622 is a silicone modified liquid defoamer for use in solvent systems. | |
| DAPRO® AP 7015 | Elementis 海名斯特殊化学 | DAPRO® AP 7015 is a defoamer for waterborne systems with very good emulsifying properties. It has excellent anti-foaming and de-foaming effects. It is specially recommended for systems with poor emulsifying properties such as latex paints, pigment disper...weiterlesen DAPRO® AP 7015 is a defoamer for waterborne systems with very good emulsifying properties. It has excellent anti-foaming and de-foaming effects. It is specially recommended for systems with poor emulsifying properties such as latex paints, pigment dispersions, adhesives, inks, other aqueous systems with poor emulsifying properties dispersions and so on. verkürzen | |
| DAPRO® AP 7072 | Elementis 海名斯特殊化学 | DAPRO® AP 7072 is an aqueous defoamer for high-quality rubber applications. It offers excellent foam suppression and defoaming properties. This product is easily dispersed in water, and is therefore suitable for the preparation of architectural coatings, ...weiterlesen DAPRO® AP 7072 is an aqueous defoamer for high-quality rubber applications. It offers excellent foam suppression and defoaming properties. This product is easily dispersed in water, and is therefore suitable for the preparation of architectural coatings, adhesive, ink and other water-based emulsion systems. verkürzen | |
| DAPRO® DF 1760 | Elementis 海名斯特殊化学 | DAPRO® DF 1760 foam suppressor is a highly effective, silicone free, long lasting aqueous bubble breaker. It remains effective after extended storage of the system in which it is used. | |
| DAPRO® DF 21 | Elementis 海名斯特殊化学 | DAPRO® DF 21 is a VOC-free, water dispersible defoamer with excellent application properties. This let down defoamer is effective in high quality waterborne inks, adhesives and aqueous industrial coatings and is particularly useful for gloss paints and c...weiterlesen DAPRO® DF 21 is a VOC-free, water dispersible defoamer with excellent application properties. This let down defoamer is effective in high quality waterborne inks, adhesives and aqueous industrial coatings and is particularly useful for gloss paints and clear acrylic coatings. verkürzen | |
| DAPRO® DF 307 | Elementis 海名斯特殊化学 | DAPRO® DF 307 is effective in waterborne inks and decorative coatings. It is suited for use in gloss paints and clear acrylic coatings. | |
| DAPRO® DF 677 | Elementis 海名斯特殊化学 | DAPRO® DF 677 is a high performance defoamer. It is recommended for aqueous inks. |
