 Request Sample |
PETROLITE™ EP-1100 COPOLYMERProduct |
Baker Hughes | The PETROLITE™ copolymers are copolymers of propylene and ethylene. The addition of propylene results in short chain branching, which reduces the polymer’s crystallinity as compared to our POLYWAX™ polyethylenes. The copolymers have the narrow molecular weight distributions offered by the POLYWAX polyethylene line, but the branching provides a more flexible and softer polymer with improved solvent solubility. |
|
Request Sample |
PETROLITE™ EP-700 COPOLYMERProduct |
Baker Hughes | The PETROLITE™ copolymers are copolymers of propylene and ethylene. The addition of propylene results in short chain branching, which reduces the polymer’s crystallinity as compared to our POLYWAX™ polyethylenes. The copolymers have the narrow molecular weight distributions offered by the POLYWAX polyethylene line, but the branching provides a more flexible and softer polymer with improved solvent solubility. |
|
Request Sample |
POLYMEKON™ MODIFIED WAXProduct |
Baker Hughes | This wax has been widely used in the paint and ink industries in both water and solvent based formulations. When used at normal levels, it provides attractive slip and anti-mar properties and, at the same time, does not decrease gloss like other commonly used performance additives. It is commonly supplied as a spray micronized product of 20 or 60 microns. |
|
Request Sample |
POLYWAX™ 1000 POLYETHYLENEProduct |
Baker Hughes | POLYWAX™ Polyethylenes are fully saturated homopolymers of ethylene that exhibit a high degree of linearity and crystallinity. These have narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product densities at 25 degrees C range from a low of 0.93 g/cc for POLYWAX 400 to a high of 0.98 g/cc for POLYWAX 3000. In application, these exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability and resistance to chemical attack. |
|
Request Sample |
POLYWAX™ 2000 POLYETHYLENEProduct |
Baker Hughes | POLYWAX™ Polyethylenes are fully saturated homopolymers of ethylene that exhibit a high degree of linearity and crystallinity. These have narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product densities at 25 degrees C range from a low of 0.93 g/cc for POLYWAX 400 to a high of 0.98 g/cc for POLYWAX 3000. In application, these exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability and resistance to chemical attack. |
|
Request Sample |
POLYWAX™ 3000 POLYETHYLENEProduct |
Baker Hughes | POLYWAX™ Polyethylenes are fully saturated homopolymers of ethylene that exhibit a high degree of linearity and crystallinity. These have narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product densities at 25 degrees C range from a low of 0.93 g/cc for POLYWAX 400 to a high of 0.98 g/cc for POLYWAX 3000. In application, these exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability and resistance to chemical attack. |
|
Request Sample |
POLYWAX™ 400 POLYETHYLENEProduct |
Baker Hughes | POLYWAX™ Polyethylenes are fully saturated homopolymers of ethylene that exhibit a high degree of linearity and crystallinity. These have narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product densities at 25 degrees C range from a low of 0.93 g/cc for POLYWAX 400 to a high of 0.98 g/cc for POLYWAX 3000. In application, these exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability and resistance to chemical attack. |
|
Request Sample |
POLYWAX™ 500 POLYETHYLENEProduct |
Baker Hughes | POLYWAX™ Polyethylenes are fully saturated homopolymers of ethylene that exhibit a high degree of linearity and crystallinity. These have narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product densities at 25 degrees C range from a low of 0.93 g/cc for POLYWAX 400 to a high of 0.98 g/cc for POLYWAX 3000. In application, these exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability and resistance to chemical attack. |
|
Request Sample |
POLYWAX™ 600 POLYETHYLENEProduct |
Baker Hughes | POLYWAX™ Polyethylenes are fully saturated homopolymers of ethylene that exhibit a high degree of linearity and crystallinity. These have narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product densities at 25 degrees C range from a low of 0.93 g/cc for POLYWAX 400 to a high of 0.98 g/cc for POLYWAX 3000. In application, these exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability and resistance to chemical attack. |
|
Request Sample |
POLYWAX™ 655 POLYETHYLENEProduct |
Baker Hughes | POLYWAX™ Polyethylenes are fully saturated homopolymers of ethylene that exhibit a high degree of linearity and crystallinity. These have narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product densities at 25 degrees C range from a low of 0.93 g/cc for POLYWAX 400 to a high of 0.98 g/cc for POLYWAX 3000. In application, these exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability and resistance to chemical attack. |
|
Request Sample |
POLYWAX™ 725 POLYETHYLENEProduct |
Baker Hughes | POLYWAX™ Polyethylenes are fully saturated homopolymers of ethylene that exhibit a high degree of linearity and crystallinity. These have narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product densities at 25 degrees C range from a low of 0.93 g/cc for POLYWAX 400 to a high of 0.98 g/cc for POLYWAX 3000. In application, these exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability and resistance to chemical attack. |
|
Request Sample |
POLYWAX™ 850 POLYETHYLENEProduct |
Baker Hughes | POLYWAX™ Polyethylenes are fully saturated homopolymers of ethylene that exhibit a high degree of linearity and crystallinity. These have narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product densities at 25 degrees C range from a low of 0.93 g/cc for POLYWAX 400 to a high of 0.98 g/cc for POLYWAX 3000. In application, these exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability and resistance to chemical attack. |
|
Request Sample |
UNICID™ 350 ACIDProduct |
Baker Hughes | UNICID Acids are long chain, linear primary carboxylic acids. With carbon chain lengths from 25 to 50 carbons, the product line offers a range of acid numbers and melt points. Low polydispersities (Mw/Mn) of 1.1 or less result in products with hardness and low melt viscosities. UNICID Acids are approximately 80% linear carboxylic acids, the remainder being polyethylene to mirror the chain length distribution of the carboxylic acids. |
|
Request Sample |
UNICID™ 550 ACIDProduct |
Baker Hughes | UNICID Acids are long chain, linear primary carboxylic acids. With carbon chain lengths from 25 to 50 carbons, the product line offers a range of acid numbers and melt points. Low polydispersities (Mw/Mn) of 1.1 or less result in products with hardness and low melt viscosities. UNICID Acids are approximately 80% linear carboxylic acids, the remainder being polyethylene to mirror the chain length distribution of the carboxylic acids. |
|
Request Sample |
UNICID™ 700 ACIDProduct |
Baker Hughes | UNICID Acids are long chain, linear primary carboxylic acids. With carbon chain lengths from 25 to 50 carbons, the product line offers a range of acid numbers and melt points. Low polydispersities (Mw/Mn) of 1.1 or less result in products with hardness and low melt viscosities. UNICID Acids are approximately 80% linear carboxylic acids, the remainder being polyethylene to mirror the chain length distribution of the carboxylic acids. |
|
Request Sample |
AQUACER® 498Product |
BYK | Wax emulsion to increase water repellency and slip of water-borne paint systems and printing inks. Non ionic emulsion based on a paraffin wax. |
|
Request Sample |
AQUACER® 531Product |
BYK | Wax emulsion for improving surface properties of water-borne industrial paints and printing inks. Non-ionic emulsion based on a modified polyethylene wax. |
|
Request Sample |
BYK®-019 FOR INKSProduct |
BYK | Silicone defoamers for aqueous printing inks and overprint varnishes. Solution of a polyether modified polydimethylsiloxane. |
|
Request Sample |
BYK®-302 FOR INKSProduct |
BYK | A silicone surface additive with medium reduction of surface tension of printing inks and overprint varnishes. Polyether modified polydimethylsiloxane. |
|
Request Sample |
BYK®-331 FOR INKSProduct |
BYK | A silicone surface additive with medium reduction of surface tension of printing inks and overprint varnishes. Polyether modified polydimethylsiloxane. |
New Search
