ORGASOL® POLYAMIDE POWDERSBrochure |
Arkema Inc.) | ||
ORGASOL® POLYAMIDE POWDERS - ADDITIVESBrochure |
Arkema Inc.) | ||
ORGASOL® POLYAMIDE POWDERS - LUBRICANTSBrochure |
Arkema Inc.) | ||
ORGASOL® POLYAMIDE POWDERS - QUESTIONSBrochure |
Arkema Inc.) | ||
ORGASOL® POLYAMIDE POWDERS - TECHNICAL REPORT DATABrochure |
Arkema Inc.) | ||
ORGASOL® POLYAMIDE POWDERS - TECHNICAL REPORT RESISTANCEBrochure |
Arkema Inc.) | ||
ORGASOL® POLYAMIDE POWDERS - TEXTURING ADDITIVESBrochure |
Arkema Inc.) | ||
ORGASOL® POLYAMIDE POWDERS - UV & EBBrochure |
Arkema Inc.) | ||
 Request Sample |
ORGASOL® 1002 D NAT 1Product |
Arkema Inc.) | Ultrafine powder of polyamide 6, with a narrow particle size distribution and nearly round particle shape. |
|
Request Sample |
ORGASOL® 2001 EXD NAT 1Product |
Arkema Inc.) | Ultrafine powder of polyamide 12, with a narrow particle size distribution and nearly round particle shape. |
|
Request Sample |
ORGASOL® 2001 UD NAT 1Product |
Arkema Inc.) | Ultrafine powder of polyamide 12, with a narrow particle size distribution and nearly round particle shape. |
|
Request Sample |
ORGASOL® 2002 D NAT 1Product |
Arkema Inc.) | Ultrafine powder of polyamide 12, with a narrow particle size distribution and nearly round particle shape. |
|
Request Sample |
ORGASOL® 3202 D NAT 1Product |
Arkema Inc.) | Ultrafine powder of copolyamide 6/12, with a narrow particle size distribution and nearly round particle shape. |
|
Request Sample |
ORGASOL® 3501 EXD NAT 1Product |
Arkema Inc.) | Ultrafine powder of copolyamide 6/12, with a narrow particle size distribution and nearly round particle shape. |
|
Request Sample |
ORGASOL® 3502 D NAT 1Product |
Arkema Inc.) | Ultrafine powder of coplyamide 6/12, with a narrow particle size distribution and nearly round particle shape. |
|
Request Sample |
POLYMEKON™ MODIFIED WAXProduct |
Baker Hughes | This wax has been widely used in the paint and ink industries in both water and solvent based formulations. When used at normal levels, it provides attractive slip and anti-mar properties and, at the same time, does not decrease gloss like other commonly used performance additives. It is commonly supplied as a spray micronized product of 20 or 60 microns. |
|
Request Sample |
POLYWAX™ 1000 POLYETHYLENEProduct |
Baker Hughes | POLYWAX™ Polyethylenes are fully saturated homopolymers of ethylene that exhibit a high degree of linearity and crystallinity. These have narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product densities at 25 degrees C range from a low of 0.93 g/cc for POLYWAX 400 to a high of 0.98 g/cc for POLYWAX 3000. In application, these exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability and resistance to chemical attack. |
|
Request Sample |
POLYWAX™ 2000 POLYETHYLENEProduct |
Baker Hughes | POLYWAX™ Polyethylenes are fully saturated homopolymers of ethylene that exhibit a high degree of linearity and crystallinity. These have narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product densities at 25 degrees C range from a low of 0.93 g/cc for POLYWAX 400 to a high of 0.98 g/cc for POLYWAX 3000. In application, these exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability and resistance to chemical attack. |
|
Request Sample |
POLYWAX™ 3000 POLYETHYLENEProduct |
Baker Hughes | POLYWAX™ Polyethylenes are fully saturated homopolymers of ethylene that exhibit a high degree of linearity and crystallinity. These have narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product densities at 25 degrees C range from a low of 0.93 g/cc for POLYWAX 400 to a high of 0.98 g/cc for POLYWAX 3000. In application, these exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability and resistance to chemical attack. |
|
Request Sample |
POLYWAX™ 400 POLYETHYLENEProduct |
Baker Hughes | POLYWAX™ Polyethylenes are fully saturated homopolymers of ethylene that exhibit a high degree of linearity and crystallinity. These have narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product densities at 25 degrees C range from a low of 0.93 g/cc for POLYWAX 400 to a high of 0.98 g/cc for POLYWAX 3000. In application, these exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability and resistance to chemical attack. |
New Search
