 Request Sample |
RHODOLINE® 111Product |
Rhodia Inc. | A clear yellow liquid used at 4 to 8 pounds per 100 gallons in flat paints and 8 to 12 pounds per 100 gallons in semi-gloss paints. The optimum use level of RHODOLINE© 111 may be determined by the pigment dispersant demand method. |
|
Request Sample |
RHODOLINE® 225Product |
Rhodia Inc. | A low foaming anionic dispersant designed for exterior coatings. Is effective in formulations containing reactive pigments. |
|
Request Sample |
RHODOLINE® 226/35Product |
Rhodia Inc. | A non-foaming, water soluble anionic dispersant for exterior or interior flat and semi-gloss finishes. Is very effective in formulations containing zinc oxide. |
|
Request Sample |
RHODOLINE® 231Product |
Rhodia Inc. | A water-soluble anionic dispersant used in pigment slurries and paper coatings. Is especially suited for stabilizing coating colors which contain titanium dioxide and calcium carbonate, and for magnesium hydroxide slurries. |
|
Request Sample |
RHODOLINE® 270Product |
Rhodia Inc. | A highly efficient anionic dispersant for pigments used in latex paints and adhesives. Use at 0.6 – 1.0% (dry basis) by weight on pigment, depending upon the system. The optimum use level of Rhodoline® 270 may be determined by the pigment dispersant demand method. |
|
Request Sample |
RHODOLINE® 286NProduct |
Rhodia Inc. | An acrylic, non-foaming, multi-purpose anionic dispersant. Use Rhodoline 286N at concentrations of 2 to 8 pounds per 100 gallons of finished paint. The optimum use level of Rhodoline 286N in each formulation may be determined by running a dispersant demand curve. |
|
Request Sample |
RHODOLINE® 581BProduct |
Rhodia Inc. | The amount required for a specific application should be determined in each case, because of the variance in factors creating foam. Since severe foaming is often controlled with 0.1% RHODOLINE© 581B, this concentration is suggested as a starting point. Make subsequent adjustments to dilute or increase the concentration to the most efficient and economical strength. In some applications, higher concentrations will be needed to obtain the desired persistence. |
|
Request Sample |
RHODOLINE® 622Product |
Rhodia Inc. | An oil/hydrophobic silica blend, containing additional inorganic hydrophobes. Due to its composition, Rhodoline® 622 is effective over a wide pH range, and is persistent when subjected to both high shear and high temperature processing conditions for waterborne coatings production. Is not dispersible in water and should be used as received. A usage level of between 0.2 and 0.6% on total formulation weight is suggested as a starting point for lab evaluations. |
|
Request Sample |
RHODOLINE® 640Product |
Rhodia Inc. | A hydrophobic silica-type defoamer, used in the manufacture of water-based coatings, latex, adhesives, and wallcoverings. Provides excellent foam control. Is not water-dispersible and should be used as received. |
|
Request Sample |
RHODOLINE® 643Product |
Rhodia Inc. | A defoamer especially formulated to give outstanding foam control when used in the manufacture of paints and coatings. In paint formulations, 2 – 6 pounds of Rhodoline® 643 will effectively defoam 100 gallons of paint, providing prolonged protection Rhodoline® 643 is not water-dispersible and should be used as received. Should be stored under 100ºF. |
|
Request Sample |
RHODOLINE® 646Product |
Rhodia Inc. | An oil based defoamer which may be post-added to a latex or coating color at a concentration of about 0.05 to 0.15%. For use in adhesives or paints, the suggested concentration is 2.5 to 5.0 pounds per 100 gallons of product. Can be stored over a wide range of temperatures. For ease of handling, storage above 40ºF is recommended. If the product should solidify due to cold, warm to room temperature and mix well before use. |
|
Request Sample |
RHODOLINE® 670Product |
Rhodia Inc. | A new APE-Free and Silicone-free Defoamer for Waterborne Adhesive and Latex Applications Provides outstanding foam control in waterborne adhesives and other waterborne resin applications. Recommended for use at concentration of 0.1 to 0.5 wt%. It can be used as received or pre-dispersed in water. |
|
Request Sample |
RHODOLINE® 679Product |
Rhodia Inc. | An oil based defoamer recommended for application at 0.1 – 0.5% to provide good foam control. For best results, should be added directly to the system. |
|
Request Sample |
RHODOLINE® 681-FProduct |
Rhodia Inc. | An oil based defoamer. For best results, should be used as received. As a starting point for lab evaluation, using 0.1% to 0.5% based on total formulation and weight is recommended. |
|
Request Sample |
RHODOLINE® 697Product |
Rhodia Inc. | A defoamer especially formulated to give outstanding foam control when used in the manufacture of paints and coatings. In paint formulations, 2- 6 pounds of Rhodoline® 697 will effectively defoam 100 gallons of paint, providing prolonged protection. Rhodoline® 697 is not water-dispersible and should be used as received. |
|
Request Sample |
RHODOLINE® 990Product |
Rhodia Inc. | A new defoamer for waterborne coating applications. Is FDA compliant for a number of direct and indirect food contact (21 CFR sections) applications and provides outstanding foam control in high-sheen coatings, adhesives and inks. Recommended for use at 0.1% to 0.5% based on the formula. It can be used as received or pre-dispersed in water. |
|
Request Sample |
RHODOLINE® 999Product |
Rhodia Inc. | An oil-free and silicone-free defoamer for water-based systems. Is widely used in gloss coatings, flexo and graure inks and adhesives. May be used as received or may be predispersed in water. Starting concentrations of 0.2 to 0.4% are recommended for the evaluation of Rhodoline® 999. |
|
Request Sample |
RHODOLINE® DF-665Product |
Rhodia Inc. | A workhorse defoamer that is designed for waterborne coating formulations. It is APE-free and zero VOC. Particularly effective for lower sheen formulations, but can be applied to higher sheen formulations up to semi gloss paints. Typical usage level is 0.2 – 0.4 % based on the formulation. |
|
Request Sample |
RHODOLINE® DF-988Product |
Rhodia Inc. | A silicone-free, mineral oil-free and APE-free defoamer for use in waterborne coating formulations. Especially designed to provide outstanding foam control in high sheen waterborne architectural formulation with no adverse effects on the coating gloss and create surface defects in coatings. Can also be used in semi gloss coatings adhesives and other waterborne formulations. Recommended usage levels are 0.1 – 0.5 % of defoamer as is based on total formulation |
|
Request Sample |
RHODOLINE® FT 100Product |
Rhodia Inc. | A unique APE-free and solvent-free additive utilized to improve freeze-thaw stability primarily in low Tg latex binders as well as waterborne paints formulated with these binders. Also improves gloss, pigment dispersion and stain resistance in these formulations. |
New Search
