ACEMATT® 3300 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 3300 is an advanced polymer-treated thermal silica, characterized by very good matting efficiency combined with high transparency. It has been developed to use in soft-feel coatings with high haptic requirements. It is used for water-based coatin...view more ACEMATT® 3300 is an advanced polymer-treated thermal silica, characterized by very good matting efficiency combined with high transparency. It has been developed to use in soft-feel coatings with high haptic requirements. It is used for water-based coatings, waterborne UV coatings, coatings for leather and films, and all types of top coats. Coating formulations containing this product has also shown outstanding resistance to household chemicals. view less | Request Sample |
ACEMATT® 3400 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 3400 is a matting agent exhibiting a multitude of exciting benefits. In solvent and waterborne coatings, the surface modification leads to an outstanding suspension behavior. In waterborne systems, there is only a minimum adsorption of associativ...view more ACEMATT® 3400 is a matting agent exhibiting a multitude of exciting benefits. In solvent and waterborne coatings, the surface modification leads to an outstanding suspension behavior. In waterborne systems, there is only a minimum adsorption of associative thickeners resulting in improved rheology stability. Excellent transparency is obtained making it ideal for clear wood coatings, as observed by the depth of color when applied over colored substrates. view less | Request Sample |
ACEMATT® 3600 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 3600 is a high performance, very fine-grained polymer-treated precipitated silica. This product is especially developed for 100% radically curing UV-coatings obtaining films with very high surface smoothness. ACEMATT® 3600 provides a very low th...view more ACEMATT® 3600 is a high performance, very fine-grained polymer-treated precipitated silica. This product is especially developed for 100% radically curing UV-coatings obtaining films with very high surface smoothness. ACEMATT® 3600 provides a very low thickening effect and high chemical resistance. It is particularly suitable for use in very thin or very thick UV-coating. view less | Request Sample |
ACEMATT® 790 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 790 as untreated, fine particle sized precipitated silica is distinguished by high matting efficiency and particularly suitable for pigmented coatings systems. | Request Sample |
ACEMATT® 810 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® 810 is an untreated coarse-grained precipitated silica and is distinguished by high matting efficiency and particularly suitable for pigmented coatings systems. This product is suggested to be used in can and coil coatings, sheet coatings, and de...view more ACEMATT® 810 is an untreated coarse-grained precipitated silica and is distinguished by high matting efficiency and particularly suitable for pigmented coatings systems. This product is suggested to be used in can and coil coatings, sheet coatings, and decorative and industrial coatings as well. ACEMATT® 810 is easily and evenly dispersed in coatings, and does not adversely affect the other application properties of coating systems. view less | Request Sample |
ACEMATT® HK 125 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 125 is a high performance, untreated coarse-grained precipitated silica with heterogeneous particle size distribution. This efficient matting agent is particularly suitable for pigmented systems with low sheen, 85° reflectometer value. ACEMAT...view more ACEMATT® HK 125 is a high performance, untreated coarse-grained precipitated silica with heterogeneous particle size distribution. This efficient matting agent is particularly suitable for pigmented systems with low sheen, 85° reflectometer value. ACEMATT® HK 125 is often used in wood and decorative coatings. view less | Request Sample |
ACEMATT® HK 390 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 390 is an untreated, finer grade matting agent based on precipitated silica. Providing very high compatibility it can be used in a large variety of coatings. The improved orientation in coating systems effectively prevents mottling. | Request Sample |
ACEMATT® HK 400 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 400 is a high performance, untreated fine-grained precipitated silica developed for a variety of applications in paints and coatings. This matting agent is primarily used in pigmented coatings systems. ACEMATT® HK 400 is widley used in can and...view more ACEMATT® HK 400 is a high performance, untreated fine-grained precipitated silica developed for a variety of applications in paints and coatings. This matting agent is primarily used in pigmented coatings systems. ACEMATT® HK 400 is widley used in can and coil coatings, decorative, wood, and industrial coatings. view less | Request Sample |
ACEMATT® HK 440 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 440 is a high performance, untreated extremely coarse-grained precipitated silica developed for a variety of applications in paint and coatings. This product is particularly suitable for pigmented coatings systems with very low sheen, 85° refl...view more ACEMATT® HK 440 is a high performance, untreated extremely coarse-grained precipitated silica developed for a variety of applications in paint and coatings. This product is particularly suitable for pigmented coatings systems with very low sheen, 85° reflectometer value. This highly efficient matting agent is used in decorative and industrial coatings, base coats and thick-film coatings. view less | Request Sample |
ACEMATT® HK 520 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® HK 520 is an untreated, medium particle-sized precipitated silica. Providing very high compatibility it can be used in a large variety of coatings. The improved orientation in coating systems effectively prevents mottling. | Request Sample |
ACEMATT® OK 390 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 390 is a wax-treated, finer-grade matting agent based on precipitated silica. Providing very high compatibility it can be used in a large variety of coatings. | Request Sample |
ACEMATT® OK 412 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 412 is a high performance, fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings. This effective matting agent is suitable for pigmented coatings. Due to the remarkable suspension be...view more ACEMATT® OK 412 is a high performance, fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings. This effective matting agent is suitable for pigmented coatings. Due to the remarkable suspension behavior, ACEMATT® OK 412 is particularly suitable for clear coatings and other non-pigmented systems. The physical properties of this product makes it an all-purpose matting agent which obtains films with excellent surface smoothness. view less | Request Sample |
ACEMATT® OK 500 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 500 is a high performance, fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings. This product is suitable for pigmented and non-pigmented systems, and due to the excellent suspension...view more ACEMATT® OK 500 is a high performance, fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings. This product is suitable for pigmented and non-pigmented systems, and due to the excellent suspension behavior, it is particularly applicable in clear coatings. The physical properties of ACEMATT® OK 500 makes it an all-purpose matting agent which obtains superior surface smoothness on films. view less | Request Sample |
ACEMATT® OK 520 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® Matting agents are high performance silica developed for a variety of applications in Paints and Coatings. ACEMATT® OK 520 is an easily dispersible, organically treated matting agent suitable for general applications. This matting agent allows ex...view more ACEMATT® Matting agents are high performance silica developed for a variety of applications in Paints and Coatings. ACEMATT® OK 520 is an easily dispersible, organically treated matting agent suitable for general applications. This matting agent allows exceptional surface characteristics with excellent slip-effect, also in pigmented coatings. As a result of its outstanding suspension behavior, it is especially suitable for use in clear coats. view less | Request Sample |
ACEMATT® OK 607 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 607 is a high performance, very fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings. This matting agent is suitable for pigmented, as well as non-pigmented systems. ACEMATT® OK 607 ...view more ACEMATT® OK 607 is a high performance, very fine-grained wax after-treated precipitated silica developed for a variety of applications in paints and coatings. This matting agent is suitable for pigmented, as well as non-pigmented systems. ACEMATT® OK 607 provides a high sheen, 85° reflectometer value, and is very suitable for thin-film coatings. Due to the suspension behavior, it is also particularly applicable in clear coatings which obtains films with the highest surface smoothness. view less | Request Sample |
ACEMATT® OK 607 LC | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 607 LC is a very fine-grained wax after-treated precipitated silica. It is mainly used as a high-purity filler for e-coats due to its outstanding suspension behaviour and low electrical conductivity. | Request Sample |
ACEMATT® OK 900 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® OK 900 is a highly efficient, medium particle-sized, wax-treated precipitated silica. It is especially recommended for coil coatings as well as general industrial coatings. | Request Sample |
ACEMATT® TS 100 | Evonik Operations GmbH, BL Coating Additives | ACEMATT® TS 100 is a high performance matting agent adding versatility to your nail polish formulations. Only low levels of addition give a matt or crackle finish. The product, which is a fumed silica is listed with the INCI name 'Silica'. | Request Sample |
ADDID® 230 | Evonik Operations GmbH, BL Coating Additives | ADDID® 230 is a yellowish, liquid antistatic additive. It is a formulation of solid salts and quaternary nitrogen compounds. This product is used for 2-pack coatings based on epoxies and polyurethanes.. It is solvent-free and increases electric conductivi...view more ADDID® 230 is a yellowish, liquid antistatic additive. It is a formulation of solid salts and quaternary nitrogen compounds. This product is used for 2-pack coatings based on epoxies and polyurethanes.. It is solvent-free and increases electric conductivity. It also is highly suitable for clears and has very good compatibility even at high addition levels. view less | Request Sample |
ADDID® 900 | Evonik Operations GmbH, BL Coating Additives | ADDID® 900 is a diamino-functional trimethoxy silane adhesion promoter. It promotes adhesion on surfaces of siliceous, oxidic, metallic and ceramic nature. With this product excellent adhesion can be obtained on substrates like aluminum, glass, steel, pla...view more ADDID® 900 is a diamino-functional trimethoxy silane adhesion promoter. It promotes adhesion on surfaces of siliceous, oxidic, metallic and ceramic nature. With this product excellent adhesion can be obtained on substrates like aluminum, glass, steel, plastics and paper. Due to ADDID® 900's improved adhesion on pigment and fillers, improvements in pigment wetting, particle aggregation, and a reduction of sedimentation can be obtained. This results in improvements in the optical (e.g. gloss) and mechanical properties (e.g. resistance under wet conditions). view less | Request Sample |
ADDID® 911 | Evonik Operations GmbH, BL Coating Additives | ADDID® 911 is an adhesion promoter for solventborne and waterborneprimers and coating formulations. It is based on an epoxy-functional silane. | Request Sample |
AERODISP® W 7520 | Evonik Operations GmbH, BL Coating Additives | AERODISP® W 7520 is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH. It is a milky-white liquid with a slight ammonia odor that has a low thickening effect and low viscosity. AERODISP® W 7520 is used for stabi...view more AERODISP® W 7520 is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH. It is a milky-white liquid with a slight ammonia odor that has a low thickening effect and low viscosity. AERODISP® W 7520 is used for stabilization for emulsions, adhesive promotion, anti-slip, anti-blocking, and surface treatment such as polishing. It also can be used for rheology control and and flocculation aid. view less | Request Sample |
AERODISP® W 7520 N | Evonik Operations GmbH, BL Coating Additives | AERODISP® W 7520 N is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH. It is a milky-white liquid with a low thickening effect and low viscosity. AERODISP® W 7520 N is used for stabilization for emulsions, adh...view more AERODISP® W 7520 N is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH. It is a milky-white liquid with a low thickening effect and low viscosity. AERODISP® W 7520 N is used for stabilization for emulsions, adhesive promotion, anti-slip, anti-blocking, and surface treatment such as polishing. It also can be used for rheology control and and flocculation aid. view less | Request Sample |
AERODISP® W 7520 NF | Evonik Operations GmbH, BL Coating Additives | AERODISP® W 7520 NF is an aqueous dispersion of a hydrophilic fumed silica with an alkaline pH-value, which is recommended for food contact applications. | Request Sample |
AERODISP® W 7520 P | Evonik Operations GmbH, BL Coating Additives | AERODISP® W 7520 P is a low viscosity, water-based dispersionof AEROSIL® fumed silica, with a slightly alkaline pH. | Request Sample |
AERODISP® WF 7620 | Evonik Operations GmbH, BL Coating Additives | AERODISP® WF 7620 is an aqueous dispersion containing 20 weight % active material of a functionalized AEROSIL®. | Request Sample |
AERODISP® WR 8520 | Evonik Operations GmbH, BL Coating Additives | AERODISP® WR 8520 is a special, structured, highly filled dispersion of hydrophobic AEROSIL® fumed silica. It can be used for rheology control, anti-settling, pigment stabilization and improves the mechanical properties. | Request Sample |
AEROSIL® 200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is possible easily. It is also used to improve free flow and anti-caking chara...view more AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is possible easily. It is also used to improve free flow and anti-caking characteristics of powders as well as an anti-settling, thickening, and anti-sagging agent. As ingredient it can be used in a broad variety of applications, like lipsticks, sulfate-free shampoos, mascara. The product is listed with the INCI-name 'Silica' and holds a COSMOS certification. view less | Request Sample |
AEROSIL® 300 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m²/g. AEROSIL® 300 has shown excellent transparency and rheology and thixotropy control of liquids, binders, and polymers. As ingredient it can be used in a broad variety of ap...view more AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m²/g. AEROSIL® 300 has shown excellent transparency and rheology and thixotropy control of liquids, binders, and polymers. As ingredient it can be used in a broad variety of applications, like lipsticks, sulfate-free shampoos, mascara. The product is listed with the INCI-name 'Silica'. view less | Request Sample |
AEROSIL® 380 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 380 is a hydrophilic fumed silica with a specific surface area of 380 m²/g. AEROSIL® 380 has excellent transparency and can be used for rheology and thixotropy control of liquids, binders, and polymers. It can also be used for reinforcement and a...view more AEROSIL® 380 is a hydrophilic fumed silica with a specific surface area of 380 m²/g. AEROSIL® 380 has excellent transparency and can be used for rheology and thixotropy control of liquids, binders, and polymers. It can also be used for reinforcement and as flow aid. As ingredient it can be used in a broad variety of applications, like lipsticks, sulfate-free shampoos, mascara. The product is listed with the INCI-name 'Silica'. view less | Request Sample |
AEROSIL® 4200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking cha...view more AEROSIL® 4200 is a hydrophilic fumed silica with a specific 200 m²/g surface area. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is easily possible. It is also used to improve the free flow and anti-caking characteristics of powders as well as an anti-settling, thickening, and anti-sagging agent. view less | Request Sample |
AEROSIL® COK 84 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® COK 84 is a formulated product with highly dispersed fumed aluminium oxide in the ratio of 5:1. | Request Sample |
AEROSIL® E 805 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® E 805 is a fumed silica after being treated with organosilane. It provides extraordinary rheological properties by keeping brilliant transparency. In addition, it is very easy to disperse. | Request Sample |
AEROSIL® E 812 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® E 812 is a fumed silica post-treated with organosilane (HMDS) and a high specific surface area combined with exceptional hydrophobicity. In addition, it is very easy to disperse. | Request Sample |
AEROSIL® E 9200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® E 9200 is a structure-modified, hydrophobic fumed silica. Enables high loading levels at low viscosities. In addition, it is very easy to disperse. | Request Sample |
AEROSIL® E 972 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® E 972 is a fumed silica after being treated with DDS (dimethyldichlorosilane). It is a very efficient Rheology Modifier suitable for a broad range of applications while being very easy to disperse. | Request Sample |
AEROSIL® MOX 80 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® MOX 80 is a cofumed oxide consisting of silicon dioxide and approximately 1 % aluminium oxide, manufactured using the AEROSIL®-process. | Request Sample |
AEROSIL® OX 50 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® OX 50 is the fumed oxide of our portfolio with the smallest specific surface area. High chemical purity, distinct low thickening and agglomeration properties are typical characteristics. | Request Sample |
AEROSIL® R 106 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 106 is a hydrophobic fumed silica surface treated with D4 (octamethylcyclotetrasiloxane). | Request Sample |
AEROSIL® R 202 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 202 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 202 helps with the thickening and thixotropy of complex polar liquids based ...view more AEROSIL® R 202 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 202 helps with the thickening and thixotropy of complex polar liquids based on epoxy, polyurethane, or vinylester resins. It also helps the thickening and thixotropy of cable gels for fiber optic cables. view less | Request Sample |
AEROSIL® R 208 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 208 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 208 helps with the thickening and thixotropy of complex polar liquids based ...view more AEROSIL® R 208 is a fumed silica after treated with a polydimethylsiloxane. It is used for adhesives and sealants, epoxy-, vinylester resins, cable gels, and gelcoats. AEROSIL® R 208 helps with the thickening and thixotropy of complex polar liquids based on epoxy, polyurethane, or vinylester resins. It also helps the thickening and thixotropy of cable gels for fiber optic cables. view less | Request Sample |
AEROSIL® R 7200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 7200 is a structure modified fumed silica after treated with methacrylsilane. | Request Sample |
AEROSIL® R 805 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 805 is a fumed silica aftertreated with an octylsilane based on AEROSIL® 200. AEROSIL® R 805 has effective rheology control in complex liquid sytems. It also can be applied in coatings systems as an anti-settling agent, for the stabilization of...view more AEROSIL® R 805 is a fumed silica aftertreated with an octylsilane based on AEROSIL® 200. AEROSIL® R 805 has effective rheology control in complex liquid sytems. It also can be applied in coatings systems as an anti-settling agent, for the stabilization of pigments, and to enhance the effect of corrosion protection, which makes it interesting for nail polish. In the personal care industry the AEROSIL® R 805 can be used as a rheology controller and stabilization aid in every kind of deodorants like sprays, roll-on and sticks. Its INCI-name is 'Silica caprylyl silylate' view less | Request Sample |
AEROSIL® R 812 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 812 is a fumed silica after-treated with organosilane (HDMDS) with high specific surface and marked hydrophobia. | Request Sample |
AEROSIL® R 812 S | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 812 S fumed silica after treated with HMDS based on AEROSIL® 300. AEROSIL® R 812 S can be applied in nail polish systems as an anti-settling agent, for the stabilization of pigments. In the personal care industry the AEROSIL® R 812 S can be use...view more AEROSIL® R 812 S fumed silica after treated with HMDS based on AEROSIL® 300. AEROSIL® R 812 S can be applied in nail polish systems as an anti-settling agent, for the stabilization of pigments. In the personal care industry the AEROSIL® R 812 S can be used as a free flow agent and rheology controller. It is well known in products like styling agents (dry water) and dry shampoos. Using AEROSIL® R 812 S is also recommended for sprays (e.g. antiperspirant) and powder-to-cream applications (e.g. lipsticks). Its INCI-name is 'Silica silylate' view less | Request Sample |
AEROSIL® R 816 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 816 is hydrophilic and hydrophobic at the same time, and is a PEG-free way to stabilize (oil-in-water) emulsions. It is even bringing some more benefits in sensory modification like reduced gloss, improved spreadability, less tackiness, delayed...view more AEROSIL® R 816 is hydrophilic and hydrophobic at the same time, and is a PEG-free way to stabilize (oil-in-water) emulsions. It is even bringing some more benefits in sensory modification like reduced gloss, improved spreadability, less tackiness, delayed dry feel. AEROSIL® R 816 is PCPC-listed as 'Silica cetyl silylate'. view less | Request Sample |
AEROSIL® R 8200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 8200 is a structure-modified, highly hydrophobic fumed silica. Due to its low thickening efficiency, high loading levels at low viscosities are achievable. | Request Sample |
AEROSIL® R 9200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 9200 is a structure modified, hydrophobic fumed silica. | Request Sample |
AEROSIL® R 972 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 972 is a fumed silica aftertreated with DDS (Dimethyldichlorosilane). It is used in silicone rubber and silicone sealants, paints and coatings, printing inks and toner, cable compounds and gels, adhesives, and plant protection. AEROSIL® R 972 h...view more AEROSIL® R 972 is a fumed silica aftertreated with DDS (Dimethyldichlorosilane). It is used in silicone rubber and silicone sealants, paints and coatings, printing inks and toner, cable compounds and gels, adhesives, and plant protection. AEROSIL® R 972 has rheology control of complex liquid systems and is water resistant, hydrophobising of liquid systems. It is used in coatings as an anti-settling agent, for pigment stabilization and improvement of corrosion protection. view less | Request Sample |
AEROSIL® R 972 V | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 972 V is a densified hydrophobic fumed silica, after treated with DDS (Dimethyldichlorosilane). Due to the densification it shows a weaker rheological effect than AEROSIL® R 972. | Request Sample |
AEROSIL® R 974 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 974 is a fumed silica powder that offers an alternative technology to stabilize water/oil emulsions. Due to the special surface modification, there are both hydrophilic and hydrophobic groups on the surface of AEROSIL® R 974, which enables AERO...view more AEROSIL® R 974 is a fumed silica powder that offers an alternative technology to stabilize water/oil emulsions. Due to the special surface modification, there are both hydrophilic and hydrophobic groups on the surface of AEROSIL® R 974, which enables AEROSIL® R 974 to enrich at water and oil interfaces and thereby stabilize water droplets in a continuous oil phase by the Pickering effect. AEROSIL® R 974 is PCPC-listed as 'Silica dimethyl silylate'. The product is also very suitable for rheology control as well as an oil thickener. view less | Request Sample |
AEROSIL® TT 600 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which i...view more AEROSIL® TT 600 is a fumed silica characterized by a particularly high degree of agglomeration. The combination of relatively high specific surface area coupled simultaneously with larger primary structures produces a unique profile of properties, which is different from all other silica grades in the portfolio. For instance, the product is recommended as a matting agent or anti-blocking additive with adsorption properties and high transparency. view less | Request Sample |
AEROXIDE® ALU 130 | Evonik Operations GmbH, BL Coating Additives | AEROXIDE® ALU 130 is a very fine-particle fumed aluminum oxide with a very high specific surface area. The positive surface charge makes it ideal to control the electrostatic charge in powder coatings. | Request Sample |
AEROXIDE® ALU C | Evonik Operations GmbH, BL Coating Additives | AEROXIDE® ALU C is a very fine fumed metal oxide with a high specific surface area. Due to the electropositive chargability, this product leads to specific properties in various applications. It is used in PET-films as an anti-blocking agent and in fluore...view more AEROXIDE® ALU C is a very fine fumed metal oxide with a high specific surface area. Due to the electropositive chargability, this product leads to specific properties in various applications. It is used in PET-films as an anti-blocking agent and in fluorescent tubes and light bulbs as an additive for a homogenous light emission and better flowability of the the flourescent mix during the electrostatic coating .AEROXIDE® ALU C is also used in powder coatings to improve chargeabiltiy and in coatings of high quality ink-jet-paper to provide high gloss and excellent printing. view less | Request Sample |
AEROXIDE® Alu C 805 | Evonik Operations GmbH, BL Coating Additives | AEROXIDE® Alu C 805 is a very fine pyrogenic Aluminium Oxide treated with octylsilane. It is used in powder coatings and toner to improve flowability and in plastic powders, such PVC, to prevent adhesion and agglomeration to protect the powders from moist...view more AEROXIDE® Alu C 805 is a very fine pyrogenic Aluminium Oxide treated with octylsilane. It is used in powder coatings and toner to improve flowability and in plastic powders, such PVC, to prevent adhesion and agglomeration to protect the powders from moisture. view less | Request Sample |
AIRASE® 5100 | Evonik Operations GmbH, BL Coating Additives | AIRASE® 5100 is a highly effective defoamer concentrate based on polyether siloxane technology. Excellent defoaming ability. | Request Sample |
Airase® 5355 Defoamer | Evonik Operations GmbH, BL Coating Additives | Airase® 5355 Defoamer is a relatively strong proprietary siloxane based defoamer designed to control and quickly eliminate foam without generating surface defects in waterbased pigment grinds, inks, overprint varnishes, adhesives and coatings. It does not...view more Airase® 5355 Defoamer is a relatively strong proprietary siloxane based defoamer designed to control and quickly eliminate foam without generating surface defects in waterbased pigment grinds, inks, overprint varnishes, adhesives and coatings. It does not contain added mineral oils, hazardous air pollutants (HAPs) or alkyl phenol ethoxylates (APEs). Airase® 5355 Defoamer is especially suited for waterbased applications requiring broad food contact compliances. view less | Request Sample |
Airase® 8070 Deaerator | Evonik Operations GmbH, BL Coating Additives | Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface...view more Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface defects. Airase® 8070 Deaerator can be especially effective against microfoam because it is designed to leave a defect-free surface, even when thick layers are applied or highly vicous coatings are sprayed. Airase® 8070 Deaerator contains no chemicals that are considered VOCs per the European Solvent Directive or the European Decorative Paint Directive; it contributes no VOCs nder EPA Method 24 testing conditions when evaluated at typical used levels (1% by weight) in a zero-VOC coating formulation. Additionally, Airase® 8070 Deaerator contains no added alkylphenol ethoxylates (APEs) or hazardous air pollutants (HAPs). view less | Request Sample |
ALBIDUR® 1223 | Evonik Operations GmbH, BL Coating Additives | ALBIDUR® 1223 is a reactive resin modifier. It offers high flexibility, excellent adhesion, chemical and solvent resistance, and good long-term persistence. This product is recommended for formulations with very low VOC-content. | Request Sample |
ALBIDUR® EP 2240 A | Evonik Operations GmbH, BL Coating Additives | ALBIDUR® EP 2240 A shows the highest performance in enhancing impact resistance without influencing chemical or corrosion resistance properties of pigmented epoxy coatings. | Request Sample |
ALBIDUR® PU 5640 | Evonik Operations GmbH, BL Coating Additives | ALBIDUR® PU 5640 is a white liquid used in the primer/filler and top coat for waterborne, solventborne, and solvent-free 2-pack component polyurethane formulations. This product has an excellent increased tear and impact resistance. It also has good prese...view more ALBIDUR® PU 5640 is a white liquid used in the primer/filler and top coat for waterborne, solventborne, and solvent-free 2-pack component polyurethane formulations. This product has an excellent increased tear and impact resistance. It also has good preservation of network density and no change in mechanical properties. ALBIDUR® PU 5640 has reduced cure shrinkage, improved dirt shedding, and barrier properties against water and diluted acids. view less | Request Sample |
Carbowet® 106 Surfactant | Evonik Operations GmbH, BL Coating Additives | Carbowet® 106 Surfactant is a multifunctional, low-foaming, solvent-free, and alkylophenol ethoxylate-free additive for pigment and substrate wetting. This cost-effective surfactant provides rapid substrate and pigment wetting and performs in a wide range...view more Carbowet® 106 Surfactant is a multifunctional, low-foaming, solvent-free, and alkylophenol ethoxylate-free additive for pigment and substrate wetting. This cost-effective surfactant provides rapid substrate and pigment wetting and performs in a wide range of applications including architectural and industrial coatings, adhesives, pigment synthesis, pigment dispersion, and inks. Carbowet® 106 Surfactant is a clear, low-odor, low-viscosity liquid that is 100% active and features excellent ease of use. Carbowet® 106 Surfactant has an HLB of 10.7 and is an environmentally preferable alternative to alkylphenol ethoxylates having approximately 6 moles of ethylene oxide. view less | Request Sample |
CARBOWET® 109 Surfactant | Evonik Operations GmbH, BL Coating Additives | CARBOWET® 109 Surfactant is a multifunctional, low-foaming, solvent-free, and alkylophenol ethoxylate-free additive for pigment and substrate wetting. This cost-effective surfactant provides rapid substrate and pigment wetting and performs in a wide range...view more CARBOWET® 109 Surfactant is a multifunctional, low-foaming, solvent-free, and alkylophenol ethoxylate-free additive for pigment and substrate wetting. This cost-effective surfactant provides rapid substrate and pigment wetting and performs in a wide range of applications including architectural and industrial coatings, adhesives, pigment synthesis, pigment dispersion and inks. CARBOWET® 109 Surfactant is a clear, low-odor, low-viscosity liquid that is 100% active and features excellent ease of use. CARBOWET® 109 Surfactant has an HLB of 13.1 and is an environmentally preferable alternative to alkylphenol ethoxylates having approximately 9 moles of ethylene oxide. view less | Request Sample |
Carbowet® 138 Surfactant | Evonik Operations GmbH, BL Coating Additives | Carbowet® 138 Surfactant is a multifunctional additive for pigment and substrate wetting. This nonionic surfactant is typically used alone or in combination with an anionic surfactant. This cost-effective surfactant can provide rapid substrate and pigment...view more Carbowet® 138 Surfactant is a multifunctional additive for pigment and substrate wetting. This nonionic surfactant is typically used alone or in combination with an anionic surfactant. This cost-effective surfactant can provide rapid substrate and pigment wetting and perform in a wide range of applications. view less | Request Sample |
Carbowet® GA-100 Surfactant | Evonik Operations GmbH, BL Coating Additives | Carbowet® GA-100 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting, stabilization, and compatibilization benefits in a wide range of aqueous formulations. Carbowet® GA-100 offers superior low-foam pig...view more Carbowet® GA-100 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting, stabilization, and compatibilization benefits in a wide range of aqueous formulations. Carbowet® GA-100 offers superior low-foam pigment wetting and milling efficiency benefits without the water sensitivity, foam, and rheology problems that are associated with APE surfactants. The performance characteristics of Carbowet® GA-100 surfactant extend to a wide range of applications and formulations in which the combination of dynamic wetting and compatibilization and stabilization can provide unique benefits. Furthermore, Carbowet® GA-100 surfactant contains no added APEs or solvents and is an easy-to-incorporate liquid additive. Carbowet® GA-100 surfactant offers the best performance in architectural paint millbases. view less | Request Sample |
Carbowet® GA-210 Surfactant | Evonik Operations GmbH, BL Coating Additives | Carbowet® GA-210 Surfactant is a formulated nonionic additive for use in a wide range of applications. This multifunctional, low- foaming grind aid can provide rapid pigment and substrate wetting and is an environmentally preferable alternative to APE- co...view more Carbowet® GA-210 Surfactant is a formulated nonionic additive for use in a wide range of applications. This multifunctional, low- foaming grind aid can provide rapid pigment and substrate wetting and is an environmentally preferable alternative to APE- containing surfactants. It is designed to assist in the formulation of low- to zero-VOC coatings while offering improved color development, freeze-thaw stability, and scrub resistance. The performance advantages provided by Carbowet® GA-210 surfactant extend to a variety of applications where surface tension reduction and wetting combined in a compatible, easy-to-incorporate liquid are desired. Carbowet® GA-210 surfactant offers the most universal and balanced properties suitable for all applications. view less | Request Sample |
Carbowet® GA-211 Surfactant | Evonik Operations GmbH, BL Coating Additives | Carbowet® GA-211 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-211 surfactant can provide exceptional dry pigment w...view more Carbowet® GA-211 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-211 surfactant can provide exceptional dry pigment wetting and deaeration and optimal milling efficiency, allowing for faster and stronger color development. The combination of properties provided by Carbowet® GA-211 surfactant can be used in a variety of applications for dynamic wetting, compatibilization, emulsification, and stabilization where an easy-to-incorporate liquid additive is desired. Carbowet® GA-211 surfactant offers low foam and strong dynamic wetting properties. view less | Request Sample |
Carbowet® GA-221 Surfactant | Evonik Operations GmbH, BL Coating Additives | Carbowet® GA-221 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-221 surfactant can provide exceptional dry pigment w...view more Carbowet® GA-221 Surfactant is an optimized combination of nonionic additives designed to provide multifunctional wetting and stabilization benefits in a wide range of aqueous formulations. Carbowet® GA-221 surfactant can provide exceptional dry pigment wetting and deaeration and optimizes milling efficiency, allowing for faster and stronger color development. The combination of properties provided by Carbowet® GA-221 surfactant can be used in a variety of applications for dynamic wetting, compatibilization, emulsification, and stabilization where an easy-to-incorporate liquid additive is desired. Compared to related products, Carbowet® GA-221 surfactant offers the most stabilization benefits and is a first choice for organic and carbon black pigment dispersions. view less | Request Sample |
COLOROL® F | Evonik Operations GmbH, BL Coating Additives | COLOROL® F is a hazy liquid formulation of high Mw phosphoamino structures. It can be used for solventborne formulations, as well as suitable for pigment concentrates and for direct grinds (with binder). This product ensures proper wetting and stabilizati...view more COLOROL® F is a hazy liquid formulation of high Mw phosphoamino structures. It can be used for solventborne formulations, as well as suitable for pigment concentrates and for direct grinds (with binder). This product ensures proper wetting and stabilization of inorganic and organic pigments. It is recommended for architectural coatings, bentonite pastes, wood coatings, industrial coatings, and anti-corrosion coatings. view less | Request Sample |
Dynol™ 360 Surfactant | Evonik Operations GmbH, BL Coating Additives | Dynol™ 360 Surfactant is a low-foam super wetting and coalescing surfactant. It is a 100% active solvent-free liquid used in a wide variety of waterborne applications, including wood metal, plastic coatings, and fountain solutions. Dynol™ 360 Surfactant o...view more Dynol™ 360 Surfactant is a low-foam super wetting and coalescing surfactant. It is a 100% active solvent-free liquid used in a wide variety of waterborne applications, including wood metal, plastic coatings, and fountain solutions. Dynol™ 360 Surfactant offers superior dynamic surface tension reduction and wetting, outstanding defect-free foam control, and excellent stability in systems ranging in pH from 3-13. It also helps to lower the minimum film formation temperature (MFFT) of a system while aiding in coalescence, allowing formulations to comply with stringent environmental VOC requirements. Suggested applications include wood coatings, plastic coatings, low-VOC coatings, and fountain solutions. view less | Request Sample |
Dynol™ 604 Surfactant | Evonik Operations GmbH, BL Coating Additives | Dynol™ 604 Surfactant is a low-VOC, low foam, nonionic wetting agent ideal for high-performance waterborne applications. This wetting agent has the ability to reduce both equilibrium and dynamic surface tension to a degree not found with other surfactants...view more Dynol™ 604 Surfactant is a low-VOC, low foam, nonionic wetting agent ideal for high-performance waterborne applications. This wetting agent has the ability to reduce both equilibrium and dynamic surface tension to a degree not found with other surfactants. A 100% active liquid. Typical applications include, wood coatings, printing inks, concrete sealers, floor polishes, leather coatings, metal/plastic primer and topcoats, architectural paints, pressure-sensitive adhesives and more. view less | Request Sample |
Dynol™ 607 Surfactant | Evonik Operations GmbH, BL Coating Additives | Dynol™ 607 surfactant has been developed to meet the growing need for high performance and cost effective surfactants. It provides a unique balance of properties for a wide range of waterbased industrial applications compared with traditional surfactants ...view more Dynol™ 607 surfactant has been developed to meet the growing need for high performance and cost effective surfactants. It provides a unique balance of properties for a wide range of waterbased industrial applications compared with traditional surfactants such as fluorosurfactants and silicones. Dynol™ 607 applications may include, coatings, graphic arts, adhesives, latex dipping, dye and pigment synthesis, pigment grinding, metalworking fluids, waste water treatment and more. view less | Request Sample |
Dynol™ 800 Surfactant | Evonik Operations GmbH, BL Coating Additives | Dynol™ 800 is a low foam superwetter with exceptional performance in water-based coatings and inks. Dynol™ 800 provides a superior balance of properties compared to traditional fluorosurfactants and silicone surfactants, with exceptional performance in wo...view more Dynol™ 800 is a low foam superwetter with exceptional performance in water-based coatings and inks. Dynol™ 800 provides a superior balance of properties compared to traditional fluorosurfactants and silicone surfactants, with exceptional performance in wood and plastic coatings as well as a wide variety of other water based coating applications. Dynol™ 800 surfactant has the ability to reduce both equilibrium and dynamic surface tension to levels not achieved with other surfactants. Dynol™ 800 surfactant is an excellent alternative for difficult-to-wet substrates requiring good flow and leveling under diverse application conditions. view less | Request Sample |
Dynol™ 810 Surfactant | Evonik Operations GmbH, BL Coating Additives | Dynol™ 810 is a low foam superwetter with exceptional performance in water-based inks and coatings. Dynol™ 810 provides a superior balance of properties compared to traditional fluorosurfactants and silicone surfactants, with exceptional performance in wo...view more Dynol™ 810 is a low foam superwetter with exceptional performance in water-based inks and coatings. Dynol™ 810 provides a superior balance of properties compared to traditional fluorosurfactants and silicone surfactants, with exceptional performance in wood and plastic coatings as well as a wide variety of other water based coating applications. Dynol™ 810 surfactant has the ability to reduce both equilibrium and dynamic surface tension to levels not achieved with other surfactants. Dynol™ 810 surfactant is an excellent alternative for difficult-to-wet substrates requiring good flow and leveling under diverse application conditions. view less | Request Sample |
Lipotin® A | Evonik Operations GmbH, BL Coating Additives | Lipotin® A is a wetting and dispersing additive based on soya lecithin for waterborne formulations. It helps the wetting of the pigments and gives additional stabilization. | Request Sample |
Lipotin® DB | Evonik Operations GmbH, BL Coating Additives | Lipotin® DB is a solvent-free, hazy liquid, soya lecithin used as a wetting and dispersing additive for solventborne coatings. It is also suitable for pigment concentrates and for direct grinds with binder. This product ensures proper wetting and stabiliz...view more Lipotin® DB is a solvent-free, hazy liquid, soya lecithin used as a wetting and dispersing additive for solventborne coatings. It is also suitable for pigment concentrates and for direct grinds with binder. This product ensures proper wetting and stabilization of inorganic and organic pigments. It is recommended addition to architectural coatings, industrial coatings. (litho)offset printing inks, gravure inks, and UPE resin filling compounds and laminating resins. Phase separation may occur during storage of the product, but can be remixed by stirring. The application properties of the product are not affected. view less | Request Sample |
NANOCRYL® C 130 | Evonik Operations GmbH, BL Coating Additives | NANOCRYL® C 130 is a clear to slightly yellow liquid, 50 wt.-% silica nanoparticles in cyclic trimethylolpropane formal acrylate. It is used for solventborne and solvent-free radiation-curing formulations. It has good flexibility and is applied in overpri...view more NANOCRYL® C 130 is a clear to slightly yellow liquid, 50 wt.-% silica nanoparticles in cyclic trimethylolpropane formal acrylate. It is used for solventborne and solvent-free radiation-curing formulations. It has good flexibility and is applied in overprint varnishes and plastic top coats. This product has an enhanced scratch and abrasion resistance with no decrease of transparency. It has great adhesion on aluminum/glass, reduced cure shrinkage, and barrier effect. It also has adhesion on plastic, an anti-settling effect of filled formulations, and improved dirt shedding. view less | Request Sample |
NANOCRYL® C 140 | Evonik Operations GmbH, BL Coating Additives | NANOCRYL® C 140 is a clear to slightly yellow liquid, 50 pbw silica nanoparticles in hexanedioldiacrylate. It has good UV-resistance, high flexibility, and is used for solventborne and solvent-free radiation-curing formulations. It also applied in overpri...view more NANOCRYL® C 140 is a clear to slightly yellow liquid, 50 pbw silica nanoparticles in hexanedioldiacrylate. It has good UV-resistance, high flexibility, and is used for solventborne and solvent-free radiation-curing formulations. It also applied in overprint varnishes and plastic top coats. This product has enhanced scratch and abrasion resistance with no decrease of transparency. It has good adhesion on aluminum/glass, reduced cure shrinkage, and barrier effect. It also has improved dirt shedding. view less | Request Sample |
NANOCRYL® C 150 | Evonik Operations GmbH, BL Coating Additives | NANOCRYL® C 150 is a clear to slightly yellow liquid, 50 wt.-% silica nanoparticles in trimethylolpropanetriacrylate (TMPTA) that is used for solventborne and solvent-free radiation-curing formulations. It has high surface hardness and high crosslinking d...view more NANOCRYL® C 150 is a clear to slightly yellow liquid, 50 wt.-% silica nanoparticles in trimethylolpropanetriacrylate (TMPTA) that is used for solventborne and solvent-free radiation-curing formulations. It has high surface hardness and high crosslinking density in overprint varnishes and plastic top coats. It has excellent enhanced scratch and abrasion resistance with no decrease of transparency. It has great adhesion on aluminum/glass, reduced cure shrinkage, and a barrier effect. It also has improved dirt shedding and adhesion on plastic. view less | Request Sample |
NANOPOL® C 750 | Evonik Operations GmbH, BL Coating Additives | NANOPOL® C 750 shows very high performance in scratch- and abrasion-resistance without influencing the gloss or transparency of waterborne coatings. | Request Sample |
NANOPOL® C 784 | Evonik Operations GmbH, BL Coating Additives | NANOPOL® C 784 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the coating. | Request Sample |
NANOPOX® C 620 | Evonik Operations GmbH, BL Coating Additives | NANOPOX® C 620 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the cured cationic UV-coating. | Request Sample |
REWOPAL® M 365 | Evonik Operations GmbH, BL Coating Additives | REWOPAL® M 365 is a non-ionic wetting and dispersing additive for waterborne formulations. Helps the wetting of organic pigment. Can be used as co-disprsant in base paints. | Request Sample |
SILIKOFTAL® HTF MPA/MBA | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® HTF MPA/MBA is a methoxy-functional silicone polyester resin. It shows high flexibility and low thermoplasticity. The product can be used in compliance with FDA 175.300 and BfR XV. | Request Sample |
SILIKOFTAL® HTL | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® HTL is a methoxy-functional silicone polyester resin. | Request Sample |
SILIKOFTAL® HTL 1 | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® HTL 1 is a methoxy-functional silicone polyester resin. It is a cost-efficient resin with excellent adhesion to aluminum, steel, and stainless steel. The product can be used in compliance with FDA 175.300 and BfR XV. | Request Sample |
SILIKOFTAL® HTL 3/MPA | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® HTL 3/MPA is a methoxy-functional silicone polyester resin. It shows an extraordinary yellowing resistance up to 250°C and a very good boiling water resistance. The product can be used in compliance with FDA 175.300 and BfR XV. | Request Sample |
SILIKOFTAL® HTT | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® HTT is a silicone polyester resin for the production of decorative coatings. It is a clear to slightly hazy liquid used for non-stick coatings in combination with Polytetrafluoroethylene (PTFE) and decorative coatings of cookware, household ap...view more SILIKOFTAL® HTT is a silicone polyester resin for the production of decorative coatings. It is a clear to slightly hazy liquid used for non-stick coatings in combination with Polytetrafluoroethylene (PTFE) and decorative coatings of cookware, household appliances, and electric and gas heaters with a permanent thermal stability of 250°C. Some special features of SILIKOFTAL® HTT include excellent dishwasher detergent resistance, low yellowing, good gloss retention, and without addition of organotin-containing compounds. view less | Request Sample |
SILIKOFTAL® NON-STICK 60 | Evonik Operations GmbH, BL Coating Additives | SILIKOFTAL® NON-STICK 60 is an ethoxy-functional silicone polyester resin for release coatings. The product can be used in compliance with FDA 175.300 and BfR XV. | Request Sample |
SILIKOPHEN® AC 1000 | Evonik Operations GmbH, BL Coating Additives | SILIKOPHEN® AC 1000 is a low viscosity, solvent free methoxy-functional silicone resin. It offers curing at ambient temperature by catalysis and entering of humidity via a hydrolysis/condensation reaction. This product is suitable for anti-corrosion coati...view more SILIKOPHEN® AC 1000 is a low viscosity, solvent free methoxy-functional silicone resin. It offers curing at ambient temperature by catalysis and entering of humidity via a hydrolysis/condensation reaction. This product is suitable for anti-corrosion coatings, depending on the formulation. SILIKOPHEN® AC 1000 is recommended for high temperature applications for industrial facilities, power plants, incinerating plants, ventilators, turbines, silencers, ovens, chimneys, oven inserts, barbeques, and electric and gas heaters. view less | Request Sample |
SILIKOPHEN® AC 900 | Evonik Operations GmbH, BL Coating Additives | SILIKOPHEN® AC 900 is a low viscosity methoxy-functional methyl phenylsilicone resin. It cures at ambient temperature by catalysis and entering of humidity via a hydrolysis/condensation reaction. It also features low smoke and odor development of the comp...view more SILIKOPHEN® AC 900 is a low viscosity methoxy-functional methyl phenylsilicone resin. It cures at ambient temperature by catalysis and entering of humidity via a hydrolysis/condensation reaction. It also features low smoke and odor development of the completely cured coating at temperature load. This product is suitable for anti-corrosion coatings for high temperature applications for industrial facilities, power plants, incinerating plants, ventilators, turbines, silencers, ovens, chimneys, oven inserts, barbeques, and electric and gas heaters. view less | Request Sample |
SILIKOPHEN® P 40/W | Evonik Operations GmbH, BL Coating Additives | SILIKOPHEN® P 40/W is a non-ionic dispersion, methylphenyl polysiloxane resin produced for heat-resistant decorative coatings. It has the appearance of a white, turbid liquid and is focused on high-temperature anti-corrosion coatings for mufflers, ovens, ...view more SILIKOPHEN® P 40/W is a non-ionic dispersion, methylphenyl polysiloxane resin produced for heat-resistant decorative coatings. It has the appearance of a white, turbid liquid and is focused on high-temperature anti-corrosion coatings for mufflers, ovens, chimneys, oven inserts, barbeques, and electric and gas heaters. Some special features of SILIKOPHEN® P 40/W include excellent air-drying properties, water-reducible, and has good compatibility with organic polymer emulsions. view less | Request Sample |
SILIKOPHEN® P 50/X | Evonik Operations GmbH, BL Coating Additives | SILIKOPHEN® P 50/X is a methylphenyl polysiloxane resin produced for anti-corrosion coatings. It has an appearance of a clear to slightly hazy liquid used for anti-corrosion coatings for mufflers, ovens, chimneys, oven inserts, barbeques, and electric and...view more SILIKOPHEN® P 50/X is a methylphenyl polysiloxane resin produced for anti-corrosion coatings. It has an appearance of a clear to slightly hazy liquid used for anti-corrosion coatings for mufflers, ovens, chimneys, oven inserts, barbeques, and electric and gas heaters. It also can be used with metallic pigments and special formulations to obtain continuous heat-resistance of up to 650°C. Some special features of SILIKOPHEN® P 50/X include good compatibility with organic resins, and it has good air-drying properties. view less | Request Sample |
SILIKOPHEN® P 80/X | Evonik Operations GmbH, BL Coating Additives | SILIKOPHEN® P 80/X is a solvent-borne binder for heat-resistant anti-corrosion paints. It has an appearance of clear to slightly hazy liquid which is used for anti-corrosion coatings for mufflers, ovens, chimneys, oven inserts, barbeques, and electric and...view more SILIKOPHEN® P 80/X is a solvent-borne binder for heat-resistant anti-corrosion paints. It has an appearance of clear to slightly hazy liquid which is used for anti-corrosion coatings for mufflers, ovens, chimneys, oven inserts, barbeques, and electric and gas heaters. Some special features of SILIKOPHEN® P 80/X include excellent air-drying properties and good compatibility with organic resins. It also can be used with metallic pigments and special formulations to obtain continuous heat-resistance of up to 650 °C, but is limited miscibility with aromatic hydrocarbons. view less | Request Sample |
SILIKOPHEN® P80/MPA | Evonik Operations GmbH, BL Coating Additives | SILIKOPHEN® P80/MPA is a non-reactive methyl phenyl silicone resin. It is solvent-borne, good air-drying, and contains non aromatic solvents (BTX) variants. For low VOC formulations. | Request Sample |
SILIKOPON® EC | Evonik Operations GmbH, BL Coating Additives | SILIKOPON® EC is a clear to hazy liquid, silicone epoxy resin that is dilutable by esters, ketones and glycol ethers. It is heat stable, has excellent adhesion, as well as corrosion, chemical, and solvent resistance. This product is used in high-temperatu...view more SILIKOPON® EC is a clear to hazy liquid, silicone epoxy resin that is dilutable by esters, ketones and glycol ethers. It is heat stable, has excellent adhesion, as well as corrosion, chemical, and solvent resistance. This product is used in high-temperature, anti-corrosion coatings for mufflers, ovens, chimneys, oven inserts, barbeques, and electric and gas heaters. It is used in muffler coatings particularly for motor bikes. view less | Request Sample |
SILIKOPON® ED | Evonik Operations GmbH, BL Coating Additives | SILIKOPON® ED is a silicone epoxy resin with good chemical resistance and excellent corrosion resistance. It is suitable for ultra high solids coatings. Applications include industrial and anti-corrosion coatings, offshore/marine areas, structural steel,...view more SILIKOPON® ED is a silicone epoxy resin with good chemical resistance and excellent corrosion resistance. It is suitable for ultra high solids coatings. Applications include industrial and anti-corrosion coatings, offshore/marine areas, structural steel, rail car and tank construction, concrete walls and floors, and commercial transport coatings. view less | Request Sample |
SILIKOPON® EF | Evonik Operations GmbH, BL Coating Additives | SILIKOPON® EF is a silicone-epoxy resin for high temperature resistant corrosion protection coatings. It is a stoving resin and is distinguished by good adhesion and resistance to solvents. It can be used on concrete walls and floors and for roof tile, pi...view more SILIKOPON® EF is a silicone-epoxy resin for high temperature resistant corrosion protection coatings. It is a stoving resin and is distinguished by good adhesion and resistance to solvents. It can be used on concrete walls and floors and for roof tile, pipe lining, and commercial transport coatings. Some special features of SILIKOPON® EF includes extraordinary gloss retention and weather resistance, an anti-graffiti effect, excellent corrosion resistance, and is suitable for ultra high solids coatings. view less | Request Sample |
SILIKOPUR® 8081 | Evonik Operations GmbH, BL Coating Additives | SILIKOPUR® 8081 is a silicone modified polyurethane dispersion. It provides a water-beading effect, offers extremely high flexibility, good recoatability, and good air-drying. This product is suitable for waterborne, clear coat, pigmented, direct grind, a...view more SILIKOPUR® 8081 is a silicone modified polyurethane dispersion. It provides a water-beading effect, offers extremely high flexibility, good recoatability, and good air-drying. This product is suitable for waterborne, clear coat, pigmented, direct grind, and 2-pack coatings. view less | Request Sample |
SILIKOTOP® E 900 | Evonik Operations GmbH, BL Coating Additives | SILIKOTOP® E 900 is a branched hydroxyfunctional high-solid silicone-polyester. It is recommended for formulations with very low VOC content, < 250 g/L. It has a low processing viscosity at a very low solvent demand. It also has excellent stone-chipping a...view more SILIKOTOP® E 900 is a branched hydroxyfunctional high-solid silicone-polyester. It is recommended for formulations with very low VOC content, < 250 g/L. It has a low processing viscosity at a very low solvent demand. It also has excellent stone-chipping and impact resistance, excellent appearance, and good pigment affinity, chemical resistance, and weather resistance. view less | Request Sample |